Uncategorized

Dimplex have their LST heaters, which comply with the NHS estates health guidance notes on surface temperature regulations.

These heaters comply with these regulations because the surface temperature of the heaters doesn’t pass 43 degrees C on full output.

Meeting these guidelines makes these wall mounted heaters suitable for use in hospitals, schools and retirement homes; and also other applications where young and elderly people are likely to be nearby.

One other very important thing that also makes this product very suitable for the above mentioned applications is the child lock that each heater has in place. The controls can be locked so that they can’t be tampered with.

You can heat a room up fairly quickly with a Dimplex LST heaters, as there is an integral fan inside, which reacts quicker to changes in room temperature.

It knows when it’s reached the required temperature and also when to switch off, once this temperature has been achieved.

The result of this is maximum warmth for the lowest running costs. A great combination to have from a heater.

The LST is available in the following sizes:

LST050 – 0.5kW

LST075 – 0.75kW

LST100 – 1.0kW

LST150 – 1.5kW

This new range of electric showers are compatible for both push fit and compression fitting, and with all the other latest features that these showers are supplied with; will help to make installations easy, and much quicker, than previous product installs would have taken.

Some of the important features these units incorporate, to reduce installation time, include; more working space for connections.

This means that when you remove the back plate of the product, you are not met with loads of terminals and other obstacles, all cluttered together. Instead you will have a neat layout, which will make working a lot easier.

Another feature is the 6 cable entrance points, as well as 8 water pipe entrances, these units have; which all help to meet the needs of the most challenging of situations.

If your worried about the starting temperature for the next person who will be using these showers, you don’t need to worry, as there is a phased shutdown incorporated, which works by removing any left over hot water, once the unit has been switched off.

This also helps to reduce limescale build up too.

Just added to our range of products, are the new air source heat pumps, which meet the Microgeneration Certification Scheme (MCS Approved).

This approval means that a product meets a well know high level of quality assurance, which was set out by the department of Energy And Climate Change.

The principle behind how an air source heat pump works, is quite straight forward; basically the product works by moving the heat from outside of a building to the inside. It can also work the other way too. It’s a bit similar to how an air conditioning unit works.

This product also uses the latest R410A refrigerant.

The ones we sell are designed for both heating and cooling for your home, and can be used either with, or without a standard boiler.

They can be used in conjunction to an underfloor heating system, as well as other radiators, which have high outputs.

At the moment, we have 3 different models available; one with a Hitachi compressor, the other a Toshiba one, and also a Daikin as well.

All three units are supplied with a blue digital controller with LCD screen, as standard.

Dimplex have recently launched their modern and stylish designed Q-Rad electric radiator range; which are one of the most intelligent radiators on the market place at this present time.

They feature a 24 hour and 7 day timer control, as well as three key features.

Feature 1, is the dual elements that the units have.

Having this feature means that you can maintain a specific room temperature; and in order to achieve this, either the convective, or radiant element is used.

In some instance, both elements are utilised.

Feature 2, is the open window, and open door detection system.

With this; if you accidentally leave a door or a window open, the Q-Rad will notice a change in temperature, and reduce the units output down to 50%.

As soon as the door or window is shut, normal operation will resume.

Feature 3, The eco start, delayed start

The Q-Rad has the ability to learn the thermal attributes of the area that’s it’s operating in, and can work out how long it needs to run for to achieve the target temperature.

Ranging from 0.5kW through to the larger 2kW radiators, there are five units available in this range, all of which are supplied in a white finish, with metal wall brackets included too.

They are:

QRAD050 – 0.5kW

QRAD075 – 0.75kW

QRAD100 – 1kW

QRAD150 – 1.5kW

QRAD200 – 2kW

For full information on this range, and to buy online from this website, please click here

We now sell a very competitively priced range of electric towels in either a white or chrome finish.

All of our towel rails are available in a number of different sizes, making it easy to find a suitable one to suit the size of bathroom that you have.

There are three main ranges that we can offer; which are, a curved liquid filled, flat dry element; and also a flat liquid filled range.

Electric towel rails are idea if your planning a bathroom refurbishment and want to replace an existing radiator with something more modern looking, which will enhance the appearance of the bathroom and provide you with plenty of space to hold towels.

Please click here to view the Kudox range on our website

Our most recent range of pre-gassed wall split inverter air conditioning units are manufactured in a white gloss finish, and feature Hitachi and Panasonic compressors.

There are four units available, a 9,000 BTU (KFR-23IW/X1CM), a 12,000 BTU (KFR-33IW/X1CM), an 18,000 BTU (KFR-53IW/X1CM); and also a 24,000 BTU (KFR-63IW/X1CM).

These units, like the previous ones, can also be run in a heating mode, to heat a room if required, providing a unit, that can be used all year round, and not just in the summer.

All of these new units now cover slightly larger room areas than the previous Toshiba Powered units would cover.

To browse these units online, with full specification details, please click here

CK Tools have this fantastic new product for when your working on site and need a reliable light source to carry out work, without the need to worry about finding a socket to plug the light into; as with this product no mains power is required; the fitting works off a rechargeable 7.4 volt 4.4Ah battery, which gives an impressive 3 hours battery life.

This means the fitting can be easily carried to the place where light is required, and the magnetic base that this floodlight has, allows you to simply attach the unit to any metal object, giving you the ability to illuminate areas hassle free.

The Epistar LED board that is incorporated inside this product produces a very bright 600 lumen output, lighting up the darkest of areas.

IP65 rated also means that you can attach the light to a side of a motor vehicle when working outside.

For more information on this product, please click here

DeLonghi have a new range of very stylish panel heaters, which not only feature a slim profile, but also, feature Hi-Fi Technology.

This new technology means that these heaters have a twin fan system, which distributes heat within the room, better than standard traditional panel heaters.

All three current units have a room thermostat, overheat safety protection; and an anti frost function, as standard; as well as catering for rooms up to 75 square metres.

Utilising one of these heaters in a room, can be a good choice as you are getting silent heat, which can be transported quite easily to the room which you want heat in. In other words, unlike radiators, which are a fixed installation and are there on the wall. You can simply unplug one of these units, carry it to another room, plug it in, and you can heat that room.

As the summer heat is now here, we tend to look for an easy solution to keep offices and other working environments cool, and at a comfortable temperature.

The Storm 100i evaporative cooler can help achieve this; and works to cool areas up to 100 square metres, by the simple process of evaporating water in order to cool the air temperature.

Why choose the Storm 100i?

If your looking for reasons to pick this product than it may be worth considering the following advantages that this product offers.

1) No installation is required. This is a portable unit with multi directional wheels, so can be easily moved to where it is required.

2) It has a large tank, offering a long cooling time.

3) The unit is suitable for outdoor use, as well as indoor.

4) It’s quiet operation means that you won’t be annoyed by any large noises when the product is running.

For full details on this product, please click here

We now have available, a range of super inverter multi split air conditioning units, which allow you to decide on which indoor units to pick, to run of the outdoor compressor. The only thing you need to make sure when choosing the indoor units, is that you don’t exceed the maximum kW capacity that the outdoor units can run.

As well as being able to pick your standard indoor wall mounted units, there is also a 5kW, 18000BTU ceiling cassette that is compatible with the multi split compressors, giving more flexibility and options for the customer.

There are also various pipe extension kits available for each unit too.

For more information on this product, please click here