Easyfit KFR4M-32/33 4 Metre Pipe Extension Kit

Part No: KFR4M-32/33

Interconnecting 4 metre pipe extension kit for the KFR32-GW/X1C, KFR-23IW/X1C, KFR-23IW/X1CM, KFR-33IW/X1C, KFR33-IW/X1CM, KFR23-IW/AG; and the KFR33-IW/AG Easy Fit Air Conditioning Units.

The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work.

Available in all system sizes of 1/4,3/8 1/2 and 5/8.

This particular air conditioning unit pipe extension kit size is 1/4″ and 3/8″ (liquid/gas).

These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

For other air conditioning unit pipe extension kits, please note, that the 2 and 6 metre extension kits are all listed on this website.

For a custom made kit, to suit a specific application, please contact us, where we can provide a quotation for this.

Easyfit KFR2M-32/33 2 Metre Pipe Extension Kit

Part No: KFR2M-32/33

Interconnecting 2 metre pipe extension kit for the KFR32-GW/X1c, KFR-23IW/X1C, KFR-23IW/X1CM, KFR-33IW/X1C, KFR33-IW/X1CM, KFR23-IW/AG; and KFR33-IW/AG Easy Fit Air Conditioning Units.

The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work.

Available in all system sizes of 1/4,3/8 1/2 and 5/8.

This particular air conditioning unit pipe extension kit size is 1/4″ and 3/8″ (liquid/gas).

These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

For larger air conditioning unit pipe extension kits, please note, that the 4 and 6 metre extension kits are all listed on this website.

For a custom made kit, to suit a specific application, please contact us, where we can provide a quotation for this.

Easyfit BRKT-KMS For The KMS-9918/X1c And The KMS-121224/X1c Air Conditioning Units

Part No: BRKT-KMS

Wall mounting brackets for the outdoor Condensing units of the Easyfit KMS Range of air conditioning units, which are powered by Toshiba Compressors.

These brackets are only designed for use with the following models, KMS-9918/X1c and the KMS-121224/X1c.

These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall.
They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas.

Supplied with the kit are rubber anti vibration mounting feet to adsorbe any compressor vibration on start-up of unit.

Easyfit BRKTUNI70-120 Outdoor Wall Bracket For The KFR70-QW/X1c And KFR120-QW/X1c Air Conditioning Units

Part No: BRKTUNI70-120

Wall mounting brackets for the outdoor Condensing unit of the Easyfit KFR74-QIW/X1c, and the KFR120-QIW/X1c ceiling cassette air conditioning units, which are powered by a Toshiba Compressor.

These brackets are also suitable for our multi split air conditioning units too, as well as the iPAC-18WS, and iPAC-24WS, wall split air conditioning units.

These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall.
They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas.

Supplied with the kit are rubber anti vibration mounting feet to absorb any compressor vibration on start-up of unit.

Easyfit BRKT-UNI Wall Mounting Bracket Kit For Outdoor Unit KFR32/50/51/66

Part No: BRKT-UNI

Wall mounting brackets for the outdoor Condensing unit of the Easyfit air-conditioning units, which are powered by Toshiba Compressors. These brackets are designed for use with the following models, KFR32-GW/X1C, KFR51-GW/X1C, KFR66-GW/X1C; and the KFR-50QIW/X1C inverter ceiling cassette air conditioning units.

They are also suitable for the other Toshiba, Hitachi; and Panasonic powered units as well, which includes the following models; the KFR-23IW/X1C, KFR23IW/X1CM, KFR-33IW/X1C, KFR33IW/X1CM, KFR-53IW/X1C, KFR-53IW/X1CM, KFR-63IW/X1C, KFR63IW/X1CM, KFR23-IW/AG, KFR33-IW/AG, KFR53-IW/AG and KFR63-IW/AG inverter models as well.

These wall brackets are also suitable for the latest KFR-23IW/LUX, KFR-33-IW/LUX, KFR-53IW/LUX, KGR-63IW/LUX, iPAC-09WS, and iPAC-12WS wall split air conditioning units.

These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall.

They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas.

Supplied with the kit are rubber anti vibration mounting feet to absorb any compressor vibration on start-up of unit.

Easyfit THP-13 13kW Swimming Pool Heater Inverter Powered By A Toshiba Compressor

Part No: KFR-THP13 (Updated version of the THP-12, 12kW swimming pool heater).

In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year.

Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both.

The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy.

A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool.

Features

  • Japanese Inverter Technology
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for dissipation of cold air
  • Auto Restart after a power cut
  • Intelligent Defrost
  • Quiet Running
  • Low Running Costs
  • 80% More Efficient Than Conventional Electric

Specifications

  • Power Rating: 220-240 Volts, 1Ph/50Hx
  • Heating Capacity: 13kW
  • C.O.P: >5.8
  • Advised Pool Volume m3 (with insulated pool cover): 40-60
  • Advised Water flux m3/h: >4.5
  • Rated power / Max (A): 2.8/15.7
  • Rated current: Max current (A): 12.6/37.8
  • Heating Exchanger: Titanium in PVC (Patent Design)
  • Compressor: Rotary
  • Fan direction: Horizontal
  • Noise (db(A)): <54
  • Water pipe in-out spec (inch): 1.5
  • Net dimension – LxWxH (mm): 971x440x600
  • Net weight / Gross weight (kg): 75

Easyfit THP-09 9kW Swimming Pool Heater Inverter Powered By A Toshiba Compressor

Part No: KFR-THP09

In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year.

Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both.

The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy.

A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for dissipation of cold air
  • Auto Restart after a power cut
  • Intelligent Defrost
  • Quiet Running
  • Low Running Costs
  • 80% More Efficient Than Conventional Electric

Specifications

  • Power Rating: 220-240 Volts, 1Ph/50Hx
  • Heating Capacity: 9kW
  • C.O.P: >6.2
  • Advised Pool Volume m3 (with insulated pool cover): 30-40
  • Advised Water flux m3/h: >4
  • Rated power / Max power (kW): 1.4/1.8
  • Rated current: Max current (A): 6.4/8.2
  • Heating Exchanger: Titanium in PVC (Patent Design)
  • Compressor: Rotary
  • Fan direction: Horizontal
  • Noise (db(A)): <48
  • Water pipe in-out spec (inch): 1.5
  • Net dimension – LxWxH (mm): 940x285x550
  • Packing dimension – LxWxH (mm): 1020x360x620
  • Net weight / Gross weight (kg): 52/57

Easyfit THP-06 6kW Swimming Pool Heater Inverter Powered By A Toshiba Compressor

Part No: KFR-THP06

In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year.

Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both.

The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy.

A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for dissipation of cold air
  • Auto Restart after a power cut
  • Intelligent Defrost
  • Quiet Running
  • Low Running Costs
  • 80% More Efficient Than Conventional Electric

Specifications

  • Power Rating: 220-240 Volts, 1Ph/50Hx
  • Heating Capacity: 6kW
  • C.O.P: >6.2
  • Advised Pool Volume m3 (with insulated pool cover): 20-30
  • Advised Water flux m3/h: >4
  • Rated power / Max power (kW): 0.98/1.4
  • Rated current: Max current (A): 4.6/6.4
  • Heating Exchanger: Titanium in PVC (Patent Design)
  • Compressor: Rotary
  • Fan direction: Horizontal
  • Noise (db(A)): <48
  • Water pipe in-out spec (inch): 1.5
  • Net dimension – LxWxH (mm): 940x285x550
  • Packing dimension – LxWxH (mm): 1020x360x620
  • Net weight / Gross weight (kg): 45/50

Xpelair XIL150T 6″ (150mm) Inline Shower Fan Kit With Timer

Part No: 91245AW

6″ (150mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Built in overrun timer (adjustable at installation from 3-15 minutes)
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 37
  • Electrical power rating: 25w
  • Weight: 2.1kg
  • Ducting diameter: 150mm
  • Hole size: 165mm
  • IP rating: IPX2
  • 2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL150 6″ (150mm) Inline Shower Fan Kit

Part No: 91244AW

6″ (150mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 37
  • Electrical power rating: 25w
  • Weight: 2.1kg
  • Ducting diameter: 150mm
  • Hole size: 165mm
  • IP rating: IPX2
  • 2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL125T 5″ (125mm) Inline Shower Fan Kit With Timer

Part No: 91243AW

5″ (125mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Built in overrun timer (adjustable at installation from 2-20 minutes)
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 18
  • Electrical power rating: 20w
  • Weight: 1.83kg
  • Ducting diameter: 125mm
  • Hole size: 140mm
  • IP rating: IPX2
  • 2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL125 5″ (125mm) Inline Shower Fan Kit

Part No: 91242AW

5″ (125mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 18
  • Electrical power rating: 20w
  • Weight: 1.83kg
  • Ducting diameter: 125mm
  • Hole size: 140mm
  • IP rating: IPX2
  • 2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL100T 4″ (100mm) Inline Shower Fan Kit With Timer

Part No: 90330AW

4″ (100mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Built in overrun timer (adjustable at installation from 2-20 minutes)
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 13
  • Electrical power rating: 12w
  • Weight: 0.9kg
  • Ducting diameter: 100mm
  • Hole size: 115mm
  • IP rating: IPX2
  • 3 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL100 4″ (100mm) Inline Shower Fan Kit

Part No: 90329AW

4″ (100mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

  • Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
  • Single speed inline showerfan system
  • Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
  • Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
  • Extract performance (litres/second): 13
  • Electrical power rating: 12w
  • Weight: 0.9kg
  • Ducting diameter: 100mm
  • Hole size: 115mm
  • IP rating: IPX2
  • 3 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair WHP30 3kW Wall Mounted Fan Heater With Thermostatic Controller

Part No: 89999AW

The WHP30 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

  • 3kW commercial fan heater
  • Supplied complete with HC301 thermostatic controller
  • Compact wall hung design
  • Flame retardant polycarbonate / glass filled nylon casing
  • Spiral wound Nichrome wire element
  • Grey wall bracket
  • Multi directional positioning – 180 degrees swivel and 45 degrees vertical tilt then locked in position
  • Double insulated with two thermal cut outs
  • Single phase product
  • Finished in a white and grey casing
  • For cool air circulation and thermostatic heating control use the HC301 controller (supplied with this fan heater)
  • Air delivery (litres/second): 83
  • Weight: 2.9kg
  • 1 year guarantee
  • BEAB approved
  • CE approved

Please click here to download the PDF document on this wall mounted fan heater

Xpelair WH60 6kW Wall Or Ceiling Mounted Fan Heater

Part No: 00147AC

The WH60 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

  • 6kW industrial fan heater
  • Wall or ceiling mounting options available
  • Heavy duty steel casing with die cast aluminium guards
  • Spiral wound Nichrome wire element
  • Metal wall bracket
  • Multi directional positioning – 180 degrees swivel and 45 degrees vertical tilt then locked in position
  • Wall bracket cover
  • Double safety feature of thermal cut out with auto reset and one shot fusible link
  • Suitable for Single and Three Phase supplies
  • Operated by remote switch (not supplied)
  • Air delivery (litres/second): 86
  • Weight: 6.5kg
  • 1 year guarantee
  • BEAB approved
  • CE approved

Please click here to download the PDF document on this wall mounted fan heater

Please note that this product has now been discontinued.

For a possible suitable alternative to this product, please see product code: CH06CPiRX, which is another 6kW fan heater, which is suitable for both single and three phase.

Xpelair WH30 3kW Wall Mounted Fan Heater

Part No: 98392AC

The WH30 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

  • 3kW industrial fan heater
  • Compact wall hung design
  • Heavy duty steel casing with die cast aluminium guards
  • Spiral wound Nichrome wire element
  • Metal wall bracket
  • Multi directional positioning – 180 degrees swivel and 45 degrees vertical tilt then locked in position
  • Wall bracket cover
  • Double safety feature of thermal cut out with auto reset and one shot fusible link
  • Single phase product
  • HC301 controller also available for use with this Space Heater for cool air circulation and thermostatic heating control (controller not supplied)
  • Air delivery (litres/second): 76
  • Weight: 5kg
  • 1 year guarantee
  • BEAB approved
  • CE approved

Please click here to download the PDF document on this wall mounted fan heater

Please note that this product is now discontinued.

Please see part number CFH3, as a possible suitable alternative; which is the Consort Claudgen CFH3 3kW fan heater.

Xpelair PX12 Standard 300mm (12″) Commercial Ceiling Axial Fan

Part No: 91298AW

Xpelair’s PX range brings even better flexibility into the design of commercial and larger domestic ventilation systems. These fans are ideal for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks.

These fans can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether it’s smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows for the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid, due to the concealed fixing points provided.

  • High performance extract only axial flow ventilation unit
  • 2 speed
  • Choice of optional controllers
  • Operated by remote On/Off switch (not supplied)
  • Suitable for installation at any angle in ceilings, voids and wall panels of any thickness
  • Totally enclosed motor
  • Sealed for life maintenance free bearings, suitable for running at any angle
  • Built in silent action electrothermal shutter cassette
  • Ultra slim high gloss ABS fascia with integral safety finger guard
  • Extract performance (FID litres/second): 1712
  • Ducting size: 315mm
  • Weight: 7.9kg
  • Hole size: 434x434mm
  • Spigot size: 315mm
  • 2 year guarantee

Please click here to download the PDF document on this fan

Xpelair PX9 Standard 225mm (9″) Commercial Ceiling Axial Fan

Part No: 91299AW

Xpelair’s PX range brings even better flexibility into the design of commercial and larger domestic ventilation systems. These fans are ideal for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks.

These fans can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether it’s smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows for the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid, due to the concealed fixing points provided.

  • High performance extract only axial flow ventilation unit
  • 2 speed
  • Choice of optional controllers
  • Operated by remote On/Off switch (not supplied)
  • Suitable for installation at any angle in ceilings, voids and wall panels of any thickness
  • Totally enclosed motor
  • Sealed for life maintenance free bearings, suitable for running at any angle
  • Built in silent action electrothermal shutter cassette
  • Ultra slim high gloss ABS fascia with integral safety finger guard
  • Extract performance (FID litres/second): 790
  • Ducting size: 250mm
  • Weight: 4.7kg
  • Hole size: 375x345mm
  • Spigot size: 250mm
  • 2 year guarantee

Please click here to download the PDF document on this fan

0