Part No: 449188

These residential heat recovery ventilation systems comply with building regulations, as well as providing up to 91% heat recovery, whilst they are controlling the condensation.

• UK manufactured
• SAP Appendix Q Eligible
• Energy savings trust best practice compliant
• Suitable for left or right hand installation
• Compact
• 2 x volt free inputs
• 3 position switch
• Different speeds – normal, boost and purge speeds
• Perfect for horizontal fitting applications

Part No: PHSL2BL

A 500mm 2kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: Black
• Rating: 2kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 500mm
• Weight: 2.2kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PHSL2S

A 500mm 2kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: Stainless steel
• Rating: 2kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 500mm
• Weight: 2.2kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PHSL2W

A 500mm 2kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: White
• Rating: 2kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 500mm
• Weight: 2.2kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PHSL3BL

A 600mm 3kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: Black
• Rating: 3kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 600mm
• Weight: 2.5kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PHSL3S

A 600mm 3kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: Stainless steel
• Rating: 3kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 600mm
• Weight: 2.5kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PHSL3W

A 600mm 3kW SL wireless controlled plinth heater, ideal for installations, where space is limited.

These plinth heaters are suitable for both domestic and commercial applications, and can be installed in the kick board spaces below kitchen units, and similar environments.

Specification:

• Colour: White
• Rating: 3kW
• LED indicator light
• Supplied with 2.2m of cable
• Automatic safety cut out
• For air circulation in warm weather, there is a fan only setting
• dBA: 40
• Height: 100mm
• Depth: 180mm
• Width: 600mm
• Weight: 2.5kg

Please note a separate SL wireless controller is required to operate these plinth heaters.

Please see product code CRXSL, which is the wireless controller for this product.

Part No: PLE075

A 0.75kW panel heater, with an electric timer; ideal for installations in offices, bedrooms, hotels and similar applications.

Specification:

• Wattage: 0.75kW (750w)
• 7 day timer with an electronic thermostat
• Height: 430mm
• Depth: 93mm
• Width: 442mm
• Weight: 4kg

Part No: PLE100

A 1kW panel heater, with an electric timer, ideal for installations in offices, bedrooms, hotels and similar applications.

Specification:

• Wattage: 1kW (1000w)
• 7 day timer with an electronic thermostat
• Height: 430mm
• Depth: 93mm
• Width: 614mm
• Weight: 5kg

Part No: PLE150

A 1.5kW panel heater, with an electric timer, ideal for installations in offices, bedrooms, hotels and similar applications.

Specification:

• Wattage: 1.5kW (1500w)
• 7 day timer with an electronic thermostat
• Height: 430mm
• Depth: 93mm
• Width: 720mm
• Weight: 6kg

Part No: PLE200

A 2kW panel heater, with an electric timer, ideal for installations in offices, bedrooms, hotels and similar applications.

Specification:

• Wattage: 2kW (2000w)
• 7 day timer with an electronic thermostat
• Height: 430mm
• Depth: 93mm
• Width: 852mm
• Weight: 6.5kg

Part No: QZWP15N

A 1.5kW outdoor radiant quartz heater, which has an anodised aluminium reflector, which means that the heat that is given out, is concentrated to the required area.

The recommended mounting height on the wall is 2.3 metres from the floor height.

Specification:

• Wattage: 1.5kW
• Number of lamps inside the fitting: 1
• Average lamp life in excess of 5,000 hours
• Height: 125mm
• Depth: 125mm
• Width: 480mm
• Supplied with 2.8 metres of cable
• Parasol bracket and fitting guard supplied
• Weight: 1.7kg

Part No: QZWP30N

A 3kW outdoor radiant quartz heater, which has an anodised aluminium reflector, which means that the heat that is given out, is concentrated to the required area.

The recommended mounting height on the wall is 2.3 metres from the floor height.

Specification:

• Wattage: 3kW
• Number of lamps inside the fitting: 2
• Average lamp life in excess of 5,000 hours
• Height: 125mm
• Depth: 125mm
• Width: 960mm
• Supplied with 2.8 metres of cable, as well as a fitting guard
• Weight: 3.2kg

Part No: QZWP45N

A 4.5kW outdoor radiant quartz heater, which has an anodised aluminium reflector, which means that the heat that is given out, is concentrated to the required area.

The recommended mounting height on the wall is 2.3 metres from the floor height.

Specification:

• Wattage: 4.5kW
• Number of lamps inside the fitting: 3
• Average lamp life in excess of 5,000 hours
• Height: 125mm
• Depth: 125mm
• Width: 1440mm
• Supplied with 2.8 metres of cable, as well as a fitting guard
• Weight: 6.4kg

Part No: RCT250

A 240w, ceiling tile heater, designed to fit into a 600 x 600 ceiling tile grid system; or fitted suspended from the ceiling if required.

These ceiling tile heaters have an integrated mounting system, which makes them easy to fit into an ceiling.

They are also insulated, which helps to lower any heat loss through the ceiling.

You can also use these in applications such as wet areas in zoos and stables, as they are IPX4 rated.

Specification:

• 240w
• Automatic safety cut out
• Can be operated by an external thermostat
• 2.5 metres optimum mounting height
• Length: 590mm
• Width: 590mm
• Depth: 40mm
• Weight: 4.7kG

Please note that this product has now been discontinued and replaced by a newer version, which is the RCT250SL.

Part No: RCT250SL

A 250w, wireless controlled ceiling tile heater, designed to fit into a 600 x 600 ceiling tile grid system; or can be fitted directly onto a ceiling, using the brackets provided.

These wireless controlled ceiling tile heaters can be installed invisibly into a 600 x 600 ceiling grid, giving each office, showroom, corridor, or other commercial area that they are installed in, maximum floor and wall space.

They are also insulated, which helps to reduce heat transfer to the ceiling.

You can also use these in applications such as wet areas in zoos and stables, as they are IPX4 rated.

Specification:

• Wattage: 250w
• Colour: White
• Automatic safety cut out
• Compatible with CRXSL and LC controllers, as well as SL controllers
• 2.5 metres optimum mounting height
• Length: 590mm
• Width: 590mm
• Depth: 40mm
• Weight: 4.7kG

Please also note that the CRXSL wireless controller and other SL controllers are sold separately.

Part No: RCT500

A 500w, ceiling tile heater, designed to fit into a 1200 x 600 ceiling tile grid system; or fitted suspended from the ceiling if required.

These ceiling tile heaters have an integrated mounting system, which makes them easy to fit into an ceiling.

They are also insulated, which helps to lower any heat loss through the ceiling.

You can also use these in applications such as wet areas in zoos and stables, as they are IPX4 rated.

Specification:

• 500w
• Automatic safety cut out
• Can be operated by an external thermostat
• 2.5 metres optimum mounting height
• Length: 1190mm
• Width: 590mm
• Depth: 40mm
• Weight: 8.6kG

Part No: CAR033

The Creda CAR033 is a very stylish and modern looking radiator, which has a 7 day electronic timer and temperature control.

The timer mode offers a 7 day programmable timer; and also has adaptive start and open window technology, which means that the adaptive start can actually pre-heat a room in front of a heating schedule that is already programmed, for only the required time that is actually needed, to reach the desired temperature, at that required time.

An example of the above situation would be if the radiator had a timer function set up to reach 21 degrees first thing in the morning at 7am; the adaptive start would actually start to heat the room before 7am, so that when 7am arrives, the 21 degrees that is already set up, would be achieved at 7am.

If the adaptive start wasn’t enabled, the radiator would only begin to start heating the room at 7am.

The open window technology that is incorporated inside the Creda CAR033, monitors the room temperature, at the same time that the unit is trying to reach the required temperature.

These wall mounted radiators are also oil filled to give a uniform heat distribution.

Specification:

• Colour: White
• Output: 0.33kW
• IP Rating: IP24
• Digitally controlled
• Depth: 85mm
• Height: 570mm
• Width: 348mm
• Weight: 6.8kg
• Wall bracket supplied
• Complies with Lot 20 of ERP directive
• 1 year guarantee

Part No: CAR050

The Creda CAR050 is a very stylish and modern looking radiator, which has a 7 day electronic timer and temperature control.

The timer mode offers a 7 day programmable timer; and also has adaptive start and open window technology, which means that the adaptive start can actually pre-heat a room in front of a heating schedule that is already programmed, for only the required time that is actually needed, to reach the desired temperature, at that required time.

An example of the above situation would be if the radiator had a timer function set up to reach 21 degrees first thing in the morning at 7am; the adaptive start would actually start to heat the room before 7am, so that when 7am arrives, the 21 degrees that is already set up, would be achieved at 7am.

If the adaptive start wasn’t enabled, the radiator would only begin to start heating the room at 7am.

The open window technology that is incorporated inside the Creda CAR033, monitors the room temperature, at the same time that the unit is trying to reach the required temperature.

These wall mounted radiators are also oil filled to give a uniform heat distribution.

Specification:

• Colour: White
• Output: 0.50kW
• IP Rating: IP24
• Digitally controlled
• Depth: 85mm
• Height: 570mm
• Width: 508mm
• Weight: 9.5kg
• Wall bracket supplied
• Complies with Lot 20 of ERP directive
• 1 year guarantee

Part No: CAR075

The Creda CAR075 is a very stylish and modern looking radiator, which has a 7 day electronic timer and temperature control.

The timer mode offers a 7 day programmable timer; and also has adaptive start and open window technology, which means that the adaptive start can actually pre-heat a room in front of a heating schedule that is already programmed, for only the required time that is actually needed, to reach the desired temperature, at that required time.

An example of the above situation would be if the radiator had a timer function set up to reach 21 degrees first thing in the morning at 7am; the adaptive start would actually start to heat the room before 7am, so that when 7am arrives, the 21 degrees that is already set up, would be achieved at 7am.

If the adaptive start wasn’t enabled, the radiator would only begin to start heating the room at 7am.

The open window technology that is incorporated inside the Creda CAR033, monitors the room temperature, at the same time that the unit is trying to reach the required temperature.

These wall mounted radiators are also oil filled to give a uniform heat distribution.

Specification:

• Colour: White
• Output: 0.75kW
• IP Rating: IP24
• Digitally controlled
• Depth: 85mm
• Height: 570mm
• Width: 588mm
• Weight: 10.9kg
• Wall bracket supplied
• Complies with Lot 20 of ERP directive
• 1 year guarantee