Part No: OM680/T5/TI

The ELP OM680/T5/TI, is an emergency lighting module, which covers T5 lamps between 14 – 80 watts.

These emergency lighting modules, also cover compact fluorescent lamps between 32 – 80 watts, as well as 38w 2D lamps and 55w 2D lamps.

Specification:

• Length: 210mm
• Width: 40mm
• Height: 28mm
• Fixing Centres: 202mm

Part No: EML  1133FM

12V Maintained 11-13W Remote Emergency Snake Pack.

• Maintained 11-13w remote emergency pack for self ballasted lamp
• 3 hour emergency lighting at near full illumination (after 60 seconds)
• Over charge and over discharge battery protection
• Battery overheat protection
• Can be wired non-maintained

Part No: EML 118FM

3 Hour Maintained 18W Remote Emergency Snake Pack.

• For use with a single 18w fluorescent lamp
• Can be wired non-maintained

Part No: EML 3506FM

12V Maintained Remote Emergency Snake Pack.

• Provides emergency lighting, utilising 12v tungsten halogen lamps
• Maximum load of 50w
• 24 hour recharge
• Dimmable electronic transformer included
• LED charge monitor
• Charge current: 200mA
• Battery: 6v (5 cells) 4AH high temperature Ni-Cd
• Maintaining transformer: 50w electronic 230v 50hz input 11.5v SELV output
• Emergency: 20w halogen lamp – 3 hour, 50w halogen lamp – 1 hour

Part No: EML 793FM

12V Maintained 7-9W Remote Emergency Snake Pack.

• Maintained 7-9w remote emergency pack for self ballasted lamp
• 3 hour emergency lighting at near full illumination (after 60 seconds)
• Over charge and over discharge battery protection
• Battery overheat protection
• Can be wired non-maintained

Part No: EML15603ML

An LED emergency pack, which will provide 3 hours emergency lighting back up to any remote drivers, which have an output voltage in the range of between 15 to 60 volts DC.

Specification:

• Input Voltage: 220VAC – 240VAC
• Mains Frequency: 50/60Hz
• Mains Input Current: Minimum: 42mA / Maximum: 65mA
• 24 hours battery charge time
• LED indicator lamp and holder supplied
• Provides 3 watts constant power in emergency mode for 3 hours
• SELV for output voltage
• Length: 250mm
• Width: 60mm
• Depth: 32mm

Part No: EML15605ML

An LED emergency pack, which will provide 3 hours emergency lighting back up to any remote drivers, which have an output voltage in the range of between 15 to 60 volts DC.

Specification:

• Input Voltage: 220VAC – 240VAC
• Mains Frequency: 50/60Hz
• Mains Input Current: Minimum: 42mA / Maximum: 65mA
• 24 hours battery charge time
• LED indicator lamp and holder supplied
• Provides 5 watts constant power in emergency mode for 3 hours
• Can be changed to 2.5w, instead of 5w
• SELV for output voltage
• Length: 250mm
• Width: 60mm
• Depth: 32mm

Part No: EML15605ML

An LED emergency pack, which will provide 3 hours emergency lighting back up to any remote drivers, which have an output voltage in the range of between 60 to 150 volts DC.

Please note these emergency packs can also be changed to give 2.5w for a 6 hour duration, or 10w, for a 1.5 hour duration.

Specification:

• Input Voltage: 220VAC – 240VAC
• Mains Frequency: 50/60Hz
• Mains Input Current: Minimum: 42mA / Maximum: 65mA
• 24 hours battery charge time
• LED indicator lamp and holder supplied
• Provides 5 watts constant power in emergency mode for 3 hours
• SELV for output voltage
• Length: 250mm
• Width: 60mm
• Depth: 32mm

Part No: EMLSB37WM3

A 3 hour maintained emergency lighting conversion pack, which will provide 3 hours emergency lighting duration to self ballasted LED lamps, up to a maximum load of 7w

Specification:

• 3 hours maintained emergency back up
• Input: 230VAC +/- 5%
• Output: 60-85V (268V) (Low start voltage > 90 volts)
• Mains Frequency: 50/60Hz
• 24 hours battery charge time
• 6.0 volt 5.5Ah NiCD battery
• LED indicator lamp and lamp holder supplied
• IP20 rated
• 3 year warranty, excluding the battery, which is a 2 year warranty

High Frequency Remote Maintained Emergency Pack For Use With Compact Fluorescent Fittings.

• Test button incorporated
• 3 hour maintained

Please specify below the configuration that you require.

These low voltage maintained remote emergency packs are very slimline, making them perfect for use in installations where you are limited for space in the ceiling void.

Also, unlike a lot of other remote emergency packs, these low voltage self contained maintained emergency packs, will provide the full 3 hours battery back up on a 12 volt 50w dichroic halogen lamp. At 50w these packs will work at 50% brightness, whereas a lot of emergency packs, will only provide 1 hours emergency lighting on a 50w dichroic halogen lamp.

Specification as follows:

• Operation mode: Maintained
• Duration on emergency use: 3 hours
• Input voltage: 230 volts +-10% 50/60Hz
• Lamp use: 20 – 50 watts, tugsten halogen
• Battery: 12v 14Ah sealed lead battery
• Dimensions of module: Length(177mm) x Width(50mm) x Height(44mm)
• Dimensions of transformer: Length(135mm) x Width(37mm) x Height(22mm)
• Dimensions of battery pack: Length(290mm) x Width(23mm) x Height(57mm)
• Weight: 3.1kg
• Guarantee: 3 years

Part No: LVE 35012M

Maintained 12 Volt 50 Watt Remote Emergency Pack.

• Can be used with internal or external transformer
• Can be wired as non-maintained
• Test button incorporated
• 3 hour maintained

Part No: LVE 3506M

Maintained 6 Volt 50 Watt Remote Emergency Pack.

• Can be used with internal or external transformer
• Can be wired as non-maintained
• Test button incorporated
• 3 hour maintained

Part No: EMLEDKIT3

A 3 hour plug and play maintained remote emergency box, designed for converting Red Arrow’s COMHB150BD-2 LED highbays to a maintained emergency version.

These emergency conversion packs, also work with some of Red Arrow’s other LED light fittings.

Specification:

• Material: Plastic
• Battery: 3.6v
• 50/60Hz mains frequency
• Emergency Duration: 3 hours
• Emergency Power: 3w
• Battery Life: 4 years
• Folded Dimensions: 270 x 38 x 68mm

Remote Maintained Emergency Pack For Use With Compact Fluorescent Fittings.

• Test button incorporated
• 3 hour maintained
• Only suitable for use with switch start fittings

Please specify below the configuration that you require.

Part No: 13855

35 watt low voltage slimline remote emergency snake pack for 12 volt halogen lamps.

• Voltage: 240 volts
• Length of emergency pack: 750mm
• Width: 75mm
• Height: 50mm
• Cut out diameter: 73mm
• Minimum void: 150mm
• Lamp type emergency pack designed for: 35w MR16 dichroic
• Material: metal and plastic
• IP rating: IP20
• Weight: 1.15kg

Part No: 14007

Recessed 3w non maintained emergency LED downlighter in aluminium with 3 hour emergency back up.

• Voltage: 240 volts
• Wattage: 1 x 3 watts
• Diameter: 70mm
• Projection: 3mm
• Cut out diameter of LED downlight: 55mm
• Material: metal
• Weight: 0.64kg

Part No: 14009

28w 2D 3 hour maintained emergency pack, in a gloss white finish, which includes the inverter, ballast, batteries and LED indicator light.

• Voltage: 240 volts
• Wattage: 28 watts
• Length of emergency pack: 150mm
• Width: 155mm
• Height: 50mm
• Material: metal
• IP rating: IP20
• Weight of emergency conversion kit: 0.94kg

Part No: UEM3EP

A 3 hour universal emergency pack, which can be used to convert a standard LED fitting, into a 3 hour emergency fitting.

These universal emergency packs consist of a LiFep04 lithium battery, along with a standalone inverter too.

Specification:

• LiFep04 battery and standalone inverter
• Charging indicator
• 5 year guarantee (2 year guarantee on the battery)