Part No: 10322

Magra, 1x70w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a matt black finish.

• Width of floodlight: 235mm
• Height of fitting: 335mm
• Voltage: 240 volts
• Lamp type: 1 x 70w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.84kg

Part No: 10323

Magra, 1x150w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a matt black finish.

• Width of floodlight: 235mm
• Height of fitting: 335mm
• Voltage: 240 volts
• Lamp type: 1 x 150w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.84kg

Part No: 10324

Magra, 1x150w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a gloss white finish.

• Width of floodlight: 235mm
• Height of fitting: 335mm
• Voltage: 240 volts
• Lamp type: 1 x 150w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.84kg

Part No: 10355

An adjustable halogen wall light, which has been constructed from die cast aluminium.

It’s IP65 rating and strengthened glass, makes it suitable for outdoor use, and the fact that it can be angled to aim the light source at the area it needs to illuminate, makes these floodlights suitable for a large number of different applications.

Specification:

• Matt silver and clear finish
• Suitable for wall mounting
• IP65 rated
• 78mm R7s tungsten halogen lamp required (please note these fittings are supplied less lamp)
• Dimmable
• Rotates 350 degrees, and can tilt 90 degrees
• Diameter: 175mm
• Projection: 300mm
• Weight: 1.4kg
• 2 years warranty

Part No: 1350

Lam, 1x70w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a matt black finish.

• Width of floodlight: 230mm
• Height of fitting: 350mm
• Voltage: 240 volts
• Lamp type: 1 x 70w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.3kg

Part No: 1351

Lam, 1x150w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a matt black finish.

• Width of floodlight: 230mm
• Height of fitting: 350mm
• Voltage: 240 volts
• Lamp type: 1 x 150w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.3kg

Part No: 13518

Mono round LED wall light, with 1 watt blue LED, in a brushed aluminium finish.

• Wattage: 1 watt
• Voltage: 12 volts
• Diameter: 45mm
• Minimum void: 90mm
• Projection: 14mm
• Cut out diameter: 34mm
• IP rating: IP20
• Material: Metal and plastic
• Weight: 0.06kg

Please note that an LED driver is required to run these LED fittings.

Please see product code 13751, which is the required LED driver for these LED fittings.

Part No: 1352

Lam, 1x150w, cast alloy and glass, HQITS, IP65 exterior outside floodlight, in a gloss white finish.

• Width of floodlight: 230mm
• Height of fitting: 350mm
• Voltage: 240 volts
• Lamp type: 1 x 150w metal halide (HQI-TS)
• Material: Cast alloy and glass
• IP rating: IP65, designed for outdoor use
• Supplied less lamp
• Weight of fitting: 4.3kg

Part No: 13520

1 watt round aluminium LED wall light, in a brushed aluminium finish, with white LED.

• Wattage: 1 watt
• Voltage: 12 volts
• Diameter: 45mm
• Cut out diameter: 34mm
• Minimum void: 90mm
• IP rating: IP20
• Material: metal and plastic
• Weight: 0.06kg

Please note that an LED driver is required to run these LED fittings.

Please see product code 13751, which is the required LED driver for these LED fittings.

Part No: 13521

1 watt round aluminium LED wall light, in a brushed aluminium finish, with blue LED.

• Wattage: 1 watt
• Voltage: 12 volts
• Diameter: 45mm
• Cut out diameter: 34mm
• Minimum void: 90mm
• IP rating: IP20
• Material: metal and plastic
• Weight: 0.06kg

Please note that an LED driver is required to run these LED fittings.

Please see product code 13751, which is the required LED driver for these LED fittings.

Part No: 13522

1 watt round aluminium LED wall light, in a brushed aluminium finish, with red LED.

• Wattage: 1 watt
• Voltage: 12 volts
• Diameter: 45mm
• Cut out diameter: 34mm
• Minimum void: 90mm
• IP rating: IP20
• Material: metal and plastic
• Weight: 0.06kg

Please note that an LED driver is required to run these LED fittings.

Please see product code 13751, which is the required LED driver for these LED fittings.

Part No: 13751

• Voltage: 240 volts
• Wattage: 1 watt – 15 watts
• IP rating: IP43
• Length: 120mm
• Width: 40mm
• Height: 19mm
• Material: plastic
• Weight: 0.14kg

Part No: 13755

2 x 35w T5, fluorescent light fitting, which can be flush or surface mounted. There is also the option of a suspension kit to use with this fitting, which will allow the fitting to be suspended from the ceiling, up to a maximum distance of 1200mm (1.2 metres).

• Length(1500mm) x Width(401mm) x Height(141mm)
• Material: metal
• Colour: gloss white paint
• High frequency ballast
• Non dimmable
• Requires 2 x 35w T5 tubes (please note fitting is supplied less tubes)

Please choose below if you would like to order a suspension kit for this fitting:

Part No: 13855

35 watt low voltage slimline remote emergency snake pack for 12 volt halogen lamps.

• Voltage: 240 volts
• Length of emergency pack: 750mm
• Width: 75mm
• Height: 50mm
• Cut out diameter: 73mm
• Minimum void: 150mm
• Lamp type emergency pack designed for: 35w MR16 dichroic
• Material: metal and plastic
• IP rating: IP20
• Weight: 1.15kg

Part No: 13889

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.21 watt white LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.21 watt white LED’s (3 LED’s on each individual fitting)
• Voltage: 240 volts
• Diameter of each individual LED fitting: 30mm
• Cut out diameter: 22mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the white LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.

Part No: 13890

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.21 watt blue LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.21 watt blue LED’s (3 LED’s on each individual fitting)
• Voltage: 240 volts
• Diameter of each individual LED fitting: 30mm
• Cut out diameter: 22mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the blue LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.

Part No: 13988

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.42 watt white LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.42 watt white LED’s (6 LED’s on each individual fitting)
• Voltage: 240 volts
• Diameter of each individual LED fitting: 45mm
• Cut out diameter: 32mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the white LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.

Part No: 13989

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.42 watt blue LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.42 watt LED’s (6 LED’s on each individual fitting)
• Voltage: 240 volts
• Diameter of each individual LED fitting: 45mm
• Cut out diameter: 32mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the blue LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.

Part No: 13990

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.07 watt white LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.07 watt LED’s
• Voltage: 240 volts
• Cut out diameter: 12mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the white LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.

Part No: 13991

10 Light pre-wired IP67 weatherproof LED decking kit with 10 x 0.07 watt white LED’s, in a polished stainless steel finish.

• IP67 rated
• 10 x 0.07 watt LED’s
• Voltage: 240 volts
• Diameter of each individual LED fitting: 15mm
• Cut out diameter: 12mm
• Minimum void: 30mm
• Material: Metal and plastic
• Weight: 1.12kg

Please note that these LED fittings are supplied complete with the white LED lamps; and also the transformer/driver to power these LED fittings is supplied as well.