111542 Calu

Part No: 111542

Calu G5.3, MR16 20w IP65 waterproof recessed low voltage downlight in a brushed aluminium finish.

  • Material: Aluminium/glass
  • Maximum wattage: 20w
  • Voltage: 12 volts
  • Diameter: 8.6cm
  • Fitting depth: 12.5cm
  • Cut-out: 6.6cm

Please note that these low voltage showerlights are supplied less lamp and transformer.

Please also note that these fittings are not suitable for direct mirror bulbs.

111432 Doru

Part No: 111432

Doru G5.3, MR16 20w IP65 waterproof recessed low voltage downlight in a satin finish.

  • Material: Aluminium/glass
  • Maximum wattage: 20w
  • Voltage: 12 volts
  • Diameter: 8.5cm
  • Fitting depth: 12.5cm
  • Cut-out: 6.6cm

Please note that these low voltage showerlights are supplied less lamp and transformer.

111992 Eyedown LED 6x 1w

Part No: 111992

Eyedown LED 6x1w, IP44 recessed LED downlight in anodized aluminium, with warm white LED’s.

  • Material: Aluminium/Glass
  • 6 x 1w Power LED’s in warm white
  • Diameter: 8.8cm
  • Height: 5.2cm
  • Cut-out: 7.6cm
  • Connection lead length: 45cm

These LED downlights are designed to fit into any cavity wall or ceiling with a maximum material thickness of  30mm.

Please note that these LED downlighters are supplied less LED control driver.

Please see product code 464110, which is the recommended LED driver to use with these LED downlights.

111982 Eyedown LED 3x 1w

Part No: 111982

Eyedown LED 3x1w, IP44 recessed LED downlight in anodized aluminium, with warm white LED’s.

  • Material: Aluminium/Glass
  • 3 x 1w Power LED’s in warm white
  • Diameter: 6.8cm
  • Height: 4.3cm
  • Cut-out: 5.9cm
  • Connection lead length: 45cm

These LED downlights are designed to fit into any cavity wall or ceiling with a maximum material thickness of  30mm.

Please note that these LED downlighters are supplied less LED control driver.

Please see product code 464108, which is the recommended LED driver to use with these LED downlights.

CAME G624VDX Deluxe 24V D.C Gard6 Parking Barrier Kit For Road Widths Of Up To 5.6 Metres

Part No: G624VDX

Deluxe 24v dc Gard6 Parking Barrier Kit for opening up to 5.6m.

Kit consists of the following:

  • 001G2080Z 24v Barrier unit x1
    001ZL38 – with built-in control panel
  • 001GO4000 Aluminium bar. 4m sections x2
  • 001GO2807 Fixed support for bar x1
  • 001G06080 55mm Balancing Spring (RED) x1
  • 001GO6803 Arm connecting joint x1
  • 001GO2809 Packs of 20 red sticker strips x2
  • 001GO2801 Flashing light x1
  • 001DIR10 Pair of safety photocells x1
  • 001GO2802 Photocell support bracket x1
  • 001GO2803 Lighting strip for bar x17m
  • 001GO2804 Lighting strip cable x1

Parking Barrier Picture

Please click here to download the PDF specification sheet on the G624VDX parking barrier kits

CAME G8230DX Deluxe 230V A.C Gard8 Parking Barrier Kit For Road Widths Of Up To 7.6 Metres

Part No: G8230DX

Deluxe 230v ac Gard8 Parking Barrier Kit for opening up to 7.6m.

Kit consists of the following:

  • 001G2080Z 230v Barrier unit x1
    001ZG6 – with built-in control panel
  • 001GO4000 Aluminium bar. 4m sections x2
  • 001GO2807 Fixed support for bar x1
  • 001G06080 55mm Balancing Spring (RED) x1
  • 001GO6803 Arm connecting joint x1
  • 001GO2809 Packs of 20 red sticker strips x2
  • 001GO2801 Flashing light x1
  • 001DIR10 Pair of safety photocells x1
  • 001GO2802 Photocell support bracket x1
  • 001GO2803 Lighting strip for bar x17m
  • 001GO2804 Lighting strip cable x1

Parking Barrier Picture

Please click here to download the PDF specification sheet on the G8230DX parking barrier kits

CAME G824VST Standard 24V D.C. Gard8 Parking Barrier Kit For Road Widths Of Up To 7.6 Metres

Part No: G824VST

24v dc Gard8 Parking Barrier Kit for opening up to 7.6m.

Kit consists of the following:

  • 001G2080Z 24v Barrier unit x1
    001ZL38 – with built-in control panel
  • 001GO4000 Aluminium bar. 4m sections x2
  • 001GO2807 Fixed support for bar x1
  • 001G06080 55mm Balancing Spring (RED) x2
  • 001GO6803 Arm connecting joint x1

Parking Barrier Picture

Please click here to download the PDF specification sheet on the G824VST parking barrier kits

CAME G8230ST Standard 230V A.C. Gard8 Parking Barrier Kit For Road Widths Of Up To 7.6 Metres

Part No: G8230ST

230v ac Gard8 Parking Barrier Kit for opening up to 7.6m.

Kit consists of the following:

  • 001G2081Z 230v Barrier unit x1
    001ZG6 – with built-in control panel
  • 001GO4000 Aluminium bar. 4m sections x2
  • 001GO2807 Fixed support for bar x1
  • 001G06080 55mm Balancing Spring (RED) x2
  • 001GO6803 Arm connecting joint x1

Parking Barrier Picture

Please click here to download the PDF specification sheet on the G8230ST parking barrier kits

KFR63-IW/X1c Easy-Fit 24000BTU 7kW Heat And Cool Air Conditioning Inverter System Powered By A Toshiba Compressor

Part No: KFR-63IW/X1c

These EASYfit split air conditioning units, consist of two parts, an internal and an external unit. The internal unit is fitted to a wall via a metal mounting plate; and the external unit is fitted just outside of the building. The two units are then connected via Copper pipe. The external unit, which is the condenser, removes the heat from inside the room and carries it outside, along with any condensation that has built up inside the system; whilst the internal unit provides the cooling.

Please note that these units will also heat the room when required.

Features

  • Powered by a Toshiba Compressor
  • Pre-gassed inverter air conditioning unit to cope with up to a 6 metre pipe run
  • Supplied with remote control with luminous night light
  • Fan speeds are adjustable for rapid cooling or to minimise noise
  • Heat pump models provide the choice of both heating and cooling
  • Oscillating air vanes for dissipation of cold air
  • Built in timer feature which will turn the unit on and off automatically
  • High efficiency air filters which remove odours and particles
  • Anti-mould coating for hygienic operation
  • Digital display to show the operational settings and temperature
  • A “Smart Air” feature which will bring up previous settings at the push of a button

Specifications

  • Power Rating: 220-240v / 50Hz
  • Cooling capacity: 6.6kW / 22500 BTU
  • Cooling power input: 2.180
  • Cooling current input: 10
  • EER: 5.5
  • Energy rating: AA
  • Annual consumption: 1,090 kWh
  • Heating capacity: 25000 BTU (7kW)
  • Heating power input: 2.13kW
  • Heating current input: 10.3A
  • COP: 3.5
  • Dehumidification (litres/hour): 3
  • Max power input: 3.70kW
  • Max current input: 16.70A
  • Maximum room size unit is suitable for: 34 – 56 square metres
  • Maximum conservatory size unit is suitable for: 25 square metres

Indoor Unit

  • Air flow volume: >_1050 m3/h
  • Noise level: 41-49 dB(A)
  • Weight: 12.5kg
  • Dimensions: 1036x230x315mm

Outdoor Unit

  • Noise level: 56 db(A)
  • Refrigerant charge quality: 2100g
  • Compressor brand: Toshiba
  • Weight: 50kg
  • Dimensions: 845x320x700

Pipe Size Information

  • 3/8 – 5/8 inches (liquid/gas)
  • Standard pipe length: 6m
  • Maximum pipe length: 15m
  • Maximum height difference between outdoor and indoor units: 10.00m
  • Unit supplied with 6 metres of pipe
  • Utilises R410a refrigerant

Please note that this product has now been discontinued.

Please see product part number KFR-63IW/X1CM, which is the new and latest 24,000 BTU white gloss air conditioning unit; that now replaces this older model.

KFR53-IW/X1c Easy-Fit 18000BTU 5kW Heat And Cool Air Conditioning Inverter System Powered By A Toshiba Compressor

Part No: KFR-53IW/X1c

These EASYfit split air conditioning units, consist of two parts, an internal and an external unit. The internal unit is fitted to a wall via a metal mounting plate; and the external unit is fitted just outside of the building. The two units are then connected via Copper pipe. The external unit, which is the condenser, removes the heat from inside the room and carries it outside, along with any condensation that has built up inside the system; whilst the internal unit provides the cooling.

Please note that these units will also heat the room when required.

Features

  • Powered by A Toshiba Compressor
  • Pre-gassed inverter air conditioning unit to cope with up to a 6 metre pipe run
  • Supplied with remote control with luminous night light
  • Fan speeds are adjustable for rapid cooling or to minimise noise
  • Heat pump models provide the choice of both heating and cooling
  • Oscillating air vanes for dissipation of cold air
  • Built in timer feature which will turn the unit on and off automatically
  • High efficiency air filters which remove odours and particles
  • Anti-mould coating for hygienic operation
  • Digital display to show the operational settings and temperature
  • A “Smart Air” feature which will bring up previous settings at the push of a button

Specifications

  • Power Rating: 220-240v / 50Hz
  • Cooling capacity: 5kW / 17000 BTU
  • Cooling power input: 1500
  • Cooling current input: 7.7
  • EER: 3.40
  • Energy rating: AA
  • Annual consumption: 750 kWh
  • Heating capacity: 18000 BTU (5.1kW)
  • Heating power input: 1.55kW
  • Heating current input: 6.5A
  • COP: 3.4
  • Dehumidification (litres/hour): 1.7
  • Max power input: 2.70kW
  • Max current input: 12.00A
  • Maximum room size unit is suitable for: 25 – 42 square metres
  • Maximum conservatory size unit is suitable for: 22 square metres

Indoor Unit

  • Air flow volume: >_800 m3/h
  • Noise level: 36-46 dB(A)
  • Weight: 9kg
  • Dimensions: 930x198x275mm

Outdoor Unit

  • Noise level: 58 db(A)
  • Refrigerant charge quality: 1380g
  • Weight: 35kg
  • Dimensions: 760x285x590

Pipe Size Information

  • 1/4 – 1/2 inches (liquid/gas)
  • Standard pipe length: 4m
  • Maximum pipe length: 15m
  • Maximum height difference between outdoor and indoor units: 10.00m
  • Unit supplied with 4 metres of pipe
  • Utilises R410a refrigerant

Please note that this product has now been discontinued.

Please see product part number KFR-53IW/X1CM, which is the new and latest 18,000 BTU white gloss air conditioning unit; that now replaces this older model.

KFR33-IW/X1c Easy-Fit 12000BTU 3.5kW Heat And Cool Air Conditioning Inverter System Powered By A Toshiba Compressor

Part No: KFR-33IW/X1c

These EASYfit split air conditioning units, consist of two parts, an internal and an external unit. The internal unit is fitted to a wall via a metal mounting plate; and the external unit is fitted just outside of the building. The two units are then connected via Copper pipe. The external unit, which is the condenser, removes the heat from inside the room and carries it outside, along with any condensation that has built up inside the system; whilst the internal unit provides the cooling.

Please note that these units will also heat the room when required.

Features

  • Powered by a Toshiba Compressor
  • Pre-gassed inverter air conditioning unit to cope with up to a 6 metre pipe run
  • Supplied with remote control with luminous night light
  • Fan speeds are adjustable for rapid cooling or to minimise noise
  • Heat pump models provide the choice of both heating and cooling
  • Oscillating air vanes for dissipation of cold air
  • Built in timer feature which will turn the unit on and off automatically
  • High efficiency air filters which remove odours and particles
  • Anti-mould coating for hygienic operation
  • Digital display to show the operational settings and temperature
  • A “Smart Air” feature which will bring up previous settings at the push of a button

Specifications Of The KFR-33IW/X1c Air Con Unit

  • Power Rating: 220-240v / 50Hz
  • Cooling capacity: 3.2kW / 11000 BTU
  • Cooling power input: 1110w
  • Cooling current input: 4.4A
  • EER: 5.4
  • Energy rating: AA
  • Annual consumption: 530 kWh
  • Heating capacity: 11000 BTU (3.4kW)
  • Heating power input: 1010w
  • Heating current input: 4.4A
  • COP: 3.4
  • Dehumidification (litres/hour): 1.1
  • Automatic restart feature after power failure
  • Maximum room size unit is suitable for: 16 – 27 square metres
  • Maximum conservatory size unit is suitable for: 13 square metres
  • 1 year guarantee

Indoor Unit

  • Air flow volume (high/medium/low): 500/400/350 m3/h
  • Noise level: 29-42 dB(A)
  • Weight: 8kg
  • Dimensions: 790x196x275mm

Outdoor Unit

  • Noise level: 56 db(A)
  • Refrigerant charge quality: 1100g
  • Weight: 29.5kg
  • Dimensions: 780x250x540mm

Pipe Size Information

  • 1/4 – 3/8 inches (liquid/gas)
  • Unit supplied with 4 metres of pipe
  • Maximum pipe length: 15m
  • Maximum height difference between outdoor and indoor units: 10.00m
  • Selectable temperature range: 17-30 degrees C
  • Utilises R410a refrigerant

Please click here to view the full PDF installation guide on this air conditioning unit

Please see product part number KFR-33IW/X1CM, which is the new and latest 12,000 BTU white gloss air conditioning unit; that now replaces this older model.

GHP20 20kW Ground Source Heat Pump Powered By A Toshiba Compressor

Part No: GHP-20.

20kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology utilised
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for the dissipation of cold air
  • Auto restart feature, designed for when power cuts occur
  • Intelligent defrost mode
  • Quiet running
  • Low running costs
  • 80% more efficient than conventional electric

Specifications

  • Heating output: 20.4kW
  • C.O.P: 20 degrees C – 50 degrees C: >_5
  • Power cont/Max A: 8.6/10.4
  • Voltage: 415V
  • Water output L/h: >_500
  • Noise dB(A): <_58
  • Dimensions: 100x65x60cm
  • Weight: 198kg
  • Utilises R410a refrigerant

GHP15 15kW Ground Source Heat Pump Powered By A Toshiba Compressor

Part No: GHP-15.

15kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology utilised
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for the dissipation of cold air
  • Auto restart feature, designed for when power cuts occur
  • Intelligent defrost mode
  • Quiet running
  • Low running costs
  • 80% more efficient than conventional electric

Specifications

  • Heating output: 15.2kW
  • C.O.P: 20 degrees C – 50 degrees C: >_5
  • Power cont/Max A: 7.5/9.4
  • Voltage: 415V
  • Water output L/h: >_375
  • Noise dB(A): <_55
  • Dimensions: 85x48x60cm
  • Weight: 122kg
  • Utilises R410a refrigerant

GHP10 10kW Ground Source Heat Pump Powered by A Toshiba Compressor

Part No: GHP-10.

10kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology utilised
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for the dissipation of cold air
  • Auto restart feature, designed for when power cuts occur
  • Intelligent defrost mode
  • Quiet running
  • Low running costs
  • 80% more efficient than conventional electric

Specifications

  • Heating output: 10.2kW
  • C.O.P: 20 degrees C – 50 degrees C: >_5
  • Power cont/Max A: 4.3/5.4
  • Voltage: 240V
  • Water output L/h: >_250
  • Noise dB(A): <_53
  • Dimensions: 85x48x60cm
  • Weight: 65kg
  • Utilises R410a refrigerant

AHP05 5kW Air Source Heat Pump Powered By A Toshiba Compressor

Part No: AHP-05.

5kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology utilised
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for the dissipation of cold air
  • Auto restart feature, designed for when power cuts occur
  • Intelligent defrost mode
  • Quiet running
  • Low running costs
  • 80% more efficient than conventional electric

Specifications

  • Heating output: 5kW
  • C.O.P: 20 degrees C – 50 degrees C: >_4
  • Power cont/Max A: 1.4/1.8
  • Voltage: 240V
  • Water output L/h: >_150
  • Noise dB(A): <_49
  • Dimensions: 100x30x70cm
  • Weight: 65kg
  • Utilises R410a refrigerant

AHP20 20kW Air Source Heat Pump Powered By A Toshiba Compressor

Part No: AHP-20.

20kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

  • Powered by a Toshiba Compressor
  • Japanese Inverter Technology utilised
  • Digital LED Controller
  • Titanium Heat Exchange
  • Oscillating air vanes for the dissipation of cold air
  • Auto restart feature, designed for when power cuts occur
  • Intelligent defrost mode
  • Quiet running
  • Low running costs
  • 80% more efficient than conventional electric

Specifications

  • Heating output: 20kW
  • C.O.P: 20 degrees C – 50 degrees C: >_4
  • Power cont/Max A: 6.9/9.2
  • Voltage: 415V
  • Water output L/h: >_500
  • Noise dB(A): <_50
  • Dimensions: 111x43x93cm
  • Weight: 102kg
  • Utilises R410a refrigerant
0