CAME 801XC-0230 Frog X Battery Back Up

Part No: 801XC-0230

The CAME Frog X battery back up card, provides operation to CAME Frog X electric gates, when there is a power outage, due to power cuts, and other incidents, which cut off the mains power supply to a working electric gate system.

801XC-0230 Specification:

  • Maximum Charging Voltage: 28V
  • Battery Voltage: 12V
  • Dimensions: 130 x 50 x 46
  • Supplied less batteries (2x 12V 7amp batteries required for the Frog X battery backup)

Please note a suitable enclosure will be needed, in order to put the batteries inside, as well as two 12V 7amp batteries too.

Please see product code: 88006-0053, which is the ZLX24SA empty control panel enclosure, which can house the 7amp batteries.

Lux Air KFR-28MB-LUX Monoblock Wall Mounted Air Conditioning Unit Without An Outdoor Unit

Part No: KFR-28MB-LUX

The KFR-28MB/LUX, Lux Air Monoblock wall mounted air conditioner, without an outdoor unit, is an easy fit DIY air conditioning unit, which does not require an F-Gas engineer for installation, as the unit, as no external outdoor compressor unit.

The Lux Air Monoblock is a 3-in-1 inverter wall mounted air conditioning unit, which has smartphone operation, and heat pump technology, offering both heating and cooling, all from the one unit.

These DIY inverter wall mounted air conditioning units without an outdoor unit, are a simple DIY, quick indoor installation, which requires no professional help; just three external holes through the wall required.

For the mains power supply; these low wall DIY wall air conditioning units come fitted with a standard 13amp UK plug, which is fitted to a 1.5 metre cable, and simply plug into a standard UK 13amp socket.

easy fit diy installation wall mounted air conditioning unit without an outdoor unit

Features:

  • DIY installation (no F-Gas engineer needed)
  • Heat pump technology offering both heating and cooling
  • Sealing strip provided for insulation
  • Energy efficient
  • Quiet operation

Specification:

  • Power Supply: 220-240V (50Hz)
  • Cooling Capacity: 10,000 BTU/H
  • Heating Capacity: 9,000 BTU/H
  • Rated Input For Cooling: 1050W
  • Rated Input For Heating: 850W
  • Rated Current For Cooling: 4.6A
  • Rated Current For Heating: 3.7A
  • EER For Cooling: 2.6
  • Maximum room size unit is suitable for: 15 – 20 square metres
  • Noise Level: 53dB(A)
  • Indoor Operating Temperature: 7 – 35 degrees C
  • Width: 965mm
  • Depth: 200mm
  • Height: 615mm
  • Refrigerant: R32

V-TAC VT-3216-BS 16W Aluminium Electronic UV Fly Killer With 50 Square Metre Coverage

Part No: VT-3216-BS / 11179-BS

The V-TAC 2x8W electronic UV insect killer, is an easy to use indoor fly killer, which is very easy to use, and also offers low maintenance; and which covers an area of up to 50 square metres.

Specification:

  • Wattage: 16W
  • Input Power: 220-240V AC (50/60Hz)
  • Housing: Aluminium
  • Dimensions: 354 x 93.5 x 280mm
  • Coverage: 50m2
  • Weight: 1.644kg

CAME FROGAE-P 24V RLB Battery Back Up Kit Including Batteries And Enclosure

CAME battery backup kit, for the 24 volt Came FrogAE-P 24V underground swing gate kits, which consists of the following items:

  • 1 x CAME RLB battery back up
  • 2 x 7amp batteries
  • 1 x ZLX24SA enclosure

Please note that the enclosure included is an empty ZLX24SA enclosure, as this will match the enclosure of the FrogAE-P 24 volt kits, provided that the FrogAE-P 24 volt kit, is one of the newer kits, which has the ZLX24SA control panel, and not the older ZLJ24 enclosures.

CAME FROGAE-P 230V AC Underground Electric Gate Opening Kit For A Pair Of Swing Gates 8K01MI-0584

Part No: FROGAEP KIT / 8K01MI-0584

CAME FrogAE-P 230 volt twin underground electric gate opening kit for a pair of swing gates up to 3.5m / 11′ 5″ each leaf, 230V A.C motors, complete with encoder, and DXR photocells, instead of the standard DIR10 photocells.

These Came Frog AEP electric gate openers are fully EN tested, which means that they have been tested in compliance with The European Standard on the subject of impact force.

This Came Frog AEP gate automation kit includes the following:

  • 2 x FROG-AE 230v motors
  • 2 x FROG-BN Foundation case
  • 2 x A4364 Release mechanism
  • 1 x 806TF-0030 Pair of DXR safety photocells – 20 metre range
  • 1 x ZLX230S Control panel
  • 2 x 806TS-0270 4 button rolling code gate remote control key fobs
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

Please specify below if you want the standard FROGAE-P Kit, or the FROGAE-P Kit, with the CAME connect bundle, which has a 3 year 480mb data only SIM card.

CAME 806TF-0080 Pair Of Surface Mounted DLX Photocells 30 Metre Range

Part No: 806TF-0080

A pair of surface mounted DLX photocells, which has an adjustment of the infrared beam angle from between 10 to 30 metres.

These infrared beam safety devices, have a settable contact output, which enables the photocell to double up as control device.

To prevent false detection in situations like bad weather, or direct sunlight; these Came DLX photocells, have a filter function.

Specification:

  • DLX photocells which control the gate’s area of movement
  • Can synchronise up to a maximum of eight pairs of photocells
  • 10 to 30 metre beam range
  • Photocells can double up as a control device, thanks to the settable contact output
  • Filter function to prevent false detection
  • Power Supply (V): CXN BUS
  • IP rating: IP54
  • Material: ABS
  • Height: 73mm
  • Width: 70mm
  • Projection: 30mm

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Single Swing Gate 8K01MI-0645

Part No: 8K01MI-0645 / FRGXS24ABK3AC

CAME Frog X, 24 volt single underground electric gate opening kit for a single swing gate up to 400kg at 3.5m, or 800kg at 2 metres, with a 24V brushless below ground motor, complete with encoder.

This Came Frog X 24V single gate kit includes the following:

  • 1 x 801MI-0030 FROG-X 24V irreversible brushless motor with encoder
  • 1 x FROGBI Foundation box in stainless steel
  • 1 x A4366 Release mechanisms with custom made key
  • 1 x 806TF-0100 Pair of DLX surface mounted infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0270 4 button rolling code gate remote
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Single Swing Gate 8K01MI-0644

Part No: 8K01MI-0644 / FRGXS24ABL3AC

CAME Frog X, 24 volt single underground electric gate opening kit for a single swing gate up to 400kg at 3.5m, or 800kg at 2 metres, with a 24V brushless below ground motor, complete with encoder.

This Came Frog X 24V single gate kit includes the following:

  • 1 x 801MI-0030 FROG-X 24V irreversible brushless motor with encoder
  • 1 x FROGBI Foundation box in stainless steel
  • 1 x A4364 Release mechanism with lever key
  • 1 x 806TF-0100 Pair of DLX surface mounted infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0270 4 button rolling code gate remote
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Single Swing Gate 8K01MI-0635

Part No: 8K01MI-0635 / FRGXS24ABK4AC

CAME Frog X, 24 volt single underground electric gate opening kit for a single swing gate up to 400kg at 3.5m, or 800kg at 2 metres, with a 24V brushless below ground motor, complete with encoder.

This Came Frog X 24V single gate kit includes the following:

  • 1 x 801MI-0030 FROG-X 24V irreversible brushless motor with encoder
  • 1 x FROG-BN Foundation box
  • 1 x A4366 Release mechanisms with custom made key
  • 1 x 806TF-0100 Pair of DLX surface mounted infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0250 4 channel rolling code gate remote control key fobs
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Single Swing Gate 8K01MI-0634

Part No: 8K01MI-0634 / FRGXS24ABL4AC

CAME Frog X, 24 volt single underground electric gate opening kit for a single swing gate up to 400kg at 3.5m, or 800kg at 2 metres, with a 24V brushless below ground motor, complete with encoder.

This Came Frog X 24V single gate kit includes the following:

  • 1 x 801MI-0030 FROG-X 24V irreversible brushless motor with encoder
  • 1 x FROG-BN Foundation box
  • 1 x A4364 Release mechanism with lever key
  • 1 x 806TF-0100 Pair of DLX surface mounted infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0250 4 channel rolling code gate remote control key fobs
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

CAME 806TF-0040 DXR Infrared Beam Safety Device Photocells 20 Metre Range DXR20CAM

Part No: 806TF-0040 / DXR20CAM

A pair of surface mounting hard wired DXR photocells, with a 20 metre range.

Consists of one transmitter and one receiver, as well as aluminium alloy casing.

DXR Infrared Beam Safety Device Specification:

  • 180 degree infrared beam swivel on vertical axis
  • IP Rating: IP54
  • Power Supply: 12 – 24V AC-DC
  • Material: ABS
  • Height: 145mm
  • Width: 52mm
  • Depth: 39mm
  • Supplied with aluminium allow casing

CAME FROGBI Frog Foundation Box Coated In Stainless Steel

Part No: FROGBI

The Came Frog stainless steel foundation box, is designed for use with the Came Frog series underground electric gate motors, and is supplied complete with an unlocking lever, as well as a fixing bracket to the gate, and a screw, which will allow you to be able to adjust the limit switch point in opening.

CAME Frog Foundation Case Specification:

  • Stainless steel Frog foundation casing
  • Suitable for compatible Came Frog motors
  • Compatible with the FROG A, FROG AE, FROG-A24E, and FROG X motors

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Pair Of Swing Gates 8K01MI-0649

Part No: 8K01MI-0649 / FRGXP24ARK3AC

CAME Frog X, 24 volt twin underground electric gate opening kit for a pair of swing gates up to 3.5m / 11′ 5″ each leaf, with 24V brushless below ground motors, complete with encoder.

This Came Frog X 24V kit includes the following:

  • 2 x FROG-X 24V irreversible brushless motors with encoder
  • 2 x FROGBI Foundation boxes in stainless steel
  • 2 x A4366 Release mechanisms with custom made key
  • 1 x 806TF-0110 Pair of DXR CXN BUS infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0270 4 button rolling code gate remote control key fobs
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

CAME FROG-X 24V Underground Electric Gate Opening Kit For A Pair Of Swing Gates 8K01MI-0641

Part No: 8K01MI-0641 / FRGXP24ABK3AC

CAME Frog X, 24 volt twin underground electric gate opening kit for a pair of swing gates up to 3.5m / 11′ 5″ each leaf, with 24V brushless below ground motors, complete with encoder.

This Came Frog X 24V kit includes the following:

  • 2 x FROG-X 24V irreversible brushless motors with encoder
  • 2 x FROGBI Foundation boxes in stainless steel
  • 2 x A4366 Release mechanisms with custom made key
  • 1 x 806TF-0100 Pair of DLX surface mounted infra-red BUS photocells
  • 1 x ZLB24SA Control panel 24V
  • 2 x 806TS-0270 4 button rolling code gate remote control key fobs
  • 1 x TOP-A433N Antenna
  • 1 x AF43S Frequency card (433,92 MHz)

Igenix DF1655BL 16 Inch Pedestal Fan With 3 Fan Speeds In Black

Part No: DF1655BL

The Igenix DF1655 is a floor standing 16″ pedestal fan in a black colour, with 3 speed settings, an oscillating function, adjustable tilt angle, and an adjustable height; making these Igenix pedestal fans, the ideal floor standing fans, for use in those warm summer months.

Igenix DF1655BL Specification:

  • Colour: Black
  • Voltage: 230V
  • Power Rating: 40W
  • Cord Length: 1.5 metres
  • Number Of Speeds: 3
  • Height: 1250mm
  • Width: 700mm
  • Depth: 700mm
  • CE, and UKCA compliance
  • Weight: 3.1kg
  • 2 year guarantee

Igenix DF1655 16 Inch Pedestal Fan With 3 Fan Speeds In White

Part No: DF1655

The Igenix DF1655 is a floor standing 16″ pedestal fan in white with 3 speed settings, an oscillating function, adjustable tilt angle, and an adjustable height; making these Igenix pedestal fans, the ideal floor standing fans, for use in those warm summer months.

Igenix DF1655 Specification:

  • Colour: White
  • Voltage: 230V
  • Power Rating: 40W
  • Cord Length: 1.5 metres
  • Number Of Speeds: 3
  • Height: 1250mm
  • Width: 700mm
  • Depth: 700mm
  • CE, and UKCA compliance
  • Weight: 3.1kg
  • 2 year guarantee

Igenix DF1800 18 Inch Air Circulator Floor Standing Fan In Chrome

Part No: DF1800

The Igenix DF1800BL is a freestanding 18″ air circulating floor fan in a chrome colour, with 3 speed settings, and a powerful 120W motor, which provides maximum comfort.

These Igenix freestanding air circulator fans have an adjustable tilt, making them the ideal floor standing fans, for use at home, and also in the office; in those warm summer months.

Igenix DF1800 Specification:

  • Colour: Chrome
  • Voltage: 230V
  • Power Rating: 120W
  • Cord Length: 1.5 metres
  • Number Of Speeds: 3
  • Height: 540mm
  • Width: 540mm
  • Depth: 200mm
  • CE, and UKCA compliance
  • Weight: 5.7kg
  • 2 year guarantee

Igenix DF1800BL 18 Inch Air Circulator Floor Standing Fan In Black

Part No: DF1800BL

The Igenix DF1800BL is a freestanding 18″ air circulating floor fan in a black colour, with 3 speed settings, and a powerful 120W motor, which provides maximum comfort.

These Igenix freestanding air circulator fans have an adjustable tilt, making them the ideal floor standing fans, for use in those warm summer months.

Igenix DF1800BL Specification:

  • Colour: Black
  • Voltage: 230V
  • Power Rating: 120W
  • Cord Length: 1.5 metres
  • Number Of Speeds: 3
  • Height: 540mm
  • Width: 540mm
  • Depth: 200mm
  • CE, and UKCA compliance
  • Weight: 5.7kg
  • 2 year guarantee