Consort Claudgen CRX1 Wireless Controller

Part Number: CRX1

The CRX1 wireless controller works with all of Consort Claudgens RX range of wireless recessed and surface ceiling fan heaters; and air curtains.

This modern and stylish controller, which has a backlit LCD display; allows different products to be run at the same time.

Specification:

  • Height: 89mm
  • Depth: 23mm
  • Width: 136mm

Energy Saving Benefits:

  • 6 temperature settings for each day
  • 7 day heating programs for each week
  • Can maintain a temperature within 0.5 degrees C
  • Temperature can be set, within 0.5 degree increments
  • When in standby mode, there is reduced power consumption

*Please note that this product has now been discontinued by the manufacturer. Please see product code CRX2, which is the replacement for the CRX1*

Univolt MK75 75mm x 50mm PVC Maxi Trunking Cover Joint

Part No: MK75

75mm x 50mm pvc cover joint, for Univolt maxi trunking.

Specification:

  • Colour: White
  • Material: PVC

Quantity discounts available.

Purchase 5 or more of these maxi trunking cover joints: Price = £2.68 each +VAT.

Univolt MK50 50mm x 50mm PVC Maxi Trunking Cover Joint

Part No: MK50

50mm x 50mm pvc cover joint, for Univolt maxi trunking.

Specification:

  • Colour: White
  • Material: PVC

Quantity discounts available.

Purchase 5 or more of these maxi trunking cover joints: Price = £2.46 each +VAT.

Fike 505-0008 TwinflexPro 8 Zone 2 Wire Fire Alarm Panel

Part No: 505-0008

These are the very latest Fike TwinflexPro 2, 8 zone bi-wire fire alarm panels, which have the ability to run up to 32 devices on each zone.

These clever Fike Twinflex fire alarm panels, can actually tell the difference between a call point or detector alarm; and have what’s know as “checkpoint technology” which allows you a little bit of time to investigate what has caused the alarm to trigger in the first place; before clearing the building.

The stylish 505-0008 Fike Twinflex panel, with its LCD display, can run in standby time for up to 72 hours.

Specification:

  • Dimensions: 331 x 331 x 99mm
  • Number of zones: 8
  • Complies to BS5839 and also EN54

Please note the Fike Twinflex fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

Please click here to view the full pdf data sheet on these Fike TwinflexPro 2, 8 zone fire alarm panels

Fike 505-0004 TwinflexPro 4 Zone 2 Wire Fire Alarm Panel

Part No: 505-0004

These are the very latest Fike TwinflexPro 2, 4 zone bi-wire fire alarm panels, which have the ability to run up to 32 devices on each zone.

These clever Fike Twinflex fire alarm panels, can actually tell the difference between a call point or detector alarm; and have what’s know as “checkpoint technology” which allows you a little bit of time to investigate what has caused the alarm to trigger in the first place; before clearing the building.

The stylish 505-0004 Fike Twinflex panel, with its LCD display, can run in standby time for up to 72 hours.

Specification:

  • Dimensions: 331 x 331 x 99mm
  • Number of zones: 4
  • Complies to BS5839 and also EN54

Please note the Fike Twinflex fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

Please click here to view the full pdf data sheet on these TwinflexPro2, 4 zone fire alarm panels

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

Fike 505-0002 TwinflexPro 2 Zone 2 Wire Fire Alarm Panel

Part No: 505-0002

These are the very latest Fike TwinflexPro 2, 2 zone bi-wire fire alarm panels, which have the ability to run up to 32 devices on each zone.

These clever Fike Twinflex fire alarm panels, can actually tell the difference between a call point or detector alarm; and have what’s know as “checkpoint technology” which allows you a little bit of time to investigate what has caused the alarm to trigger in the first place; before clearing the building.

The stylish 505-0002 Fike Twinflex panel, with its LCD display, can run in standby time for up to 72 hours.

Specification:

  • Dimensions: 331 x 331 x 99mm
  • Number of zones: 2
  • Complies to BS5839 and also EN54

Please note the Fike Twinflex fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

Please click here to view the full pdf data sheet on these Fike TwinflexPro2, 2 zone fire alarm panels

Fike 604-0008 Twinflex Pro 8 Zone 2 Wire Fire Alarm Kit

Part No: 604-0008

The Fike Twinflex Pro 8 zone two wire fire alarm system, is an extremely versatile fire alarm system, featuring the ASD multipoint detectors; allowing this system to be installed using only one pair of wires, for each zone.

A great feature of these Fike Twinflex fire alarm kits, is that these kits have been put together to provide the ideal components that would be required to install a complete fire alarm system.

You also have the option of being able to add additional Fike Twinflex devices to the system; with all of these additional devices being available to buy online from our website.

Contents Of The Fike Fire Alarm Kit:507.16

  • 1 x 8 zone fire alarm panel
  • 7 x ASD multipoint detectors with sounders
  • 2 x manual call points
  • 1 x ASD head removal tool

Please note the Fike TwinflexPro2 fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

 

 

 

 

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

Fike 604-0004 Twinflex Pro 4 Zone 2 Wire Fire Alarm Kit

Part No: 604-0004

The Fike Twinflex Pro 4 zone two wire fire alarm system, is an extremely versatile fire alarm system, featuring the ASD multipoint detectors; allowing this system to be installed using only one pair of wires, for each zone.

A great feature of these Fike Twinflex fire alarm kits, is that these kits have been put together to provide the ideal components that would be required to install a complete fire alarm system.

You also have the option of being able to add additional Fike Twinflex devices to the system; with all of these additional devices being available to buy online from our website.

Contents Of The Fike Fire Alarm Kit:

  • 1 x 4 zone fire alarm panel
  • 7 x ASD multipoint detectors with sounders
  • 2 x manual call points
  • 1 x ASD head removal tool

Please note the Fike TwinflexPro2 fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

Quantity discounts available.

Purchase 2 or more of these fire alarm kits: Price = £515.20 each +VAT.

 

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

 

Fike 604-0002 Twinflex Pro 2 Zone 2 Wire Fire Alarm Kit

Part No: 604-0002

The 604 0002 Fike Twinflex Pro 2 zone two wire fire alarm system, is an extremely versatile fire alarm system, featuring the ASD multipoint detectors; allowing this system to be installed using only one pair of wires, for each zone.

A great feature of these Fike Twinflex fire alarm kits, is that these kits have been put together to provide the ideal components that would be required to install a complete fire alarm system.

You also have the option of being able to add additional Fike Twinflex devices to the Fike Twinflex 604 0002 system; with all of these additional devices being available to buy online from our website.

Contents Of The Fike Fire Alarm Kit:

  • 1 x 2 zone fire alarm panel
  • 7 x ASD multipoint detectors with sounders
  • 2 x manual call points
  • 1 x ASD head removal tool

Please note the Fike TwinflexPro2 fire alarm panels require two 12 volt 3.4Ah batteries, which are sold separately.

Please see product code: NP3.4-12, for the batteries.

Quantity discounts available.

Purchase 2 or more of these 604-0002 fire alarm kits: Price = £486.10 each +VAT.

 

These Fike Twinflex fire alarm panels, can also take the Yuasa 12 volt 3.2Ah batteries, which are also sold separately.

Please see part number: NP3.2-12, for the Yuasa batteries.

 

Danlers CEFL PIR Flush Mounted Ceiling PIR Sensor

Part No: CEFL PIR

A flush mounted ceiling pir sensor switch, supplied with 2 metres of cable, to help with reducing installation time.

Please note these units are suitable for plasterboard ceilings.

Specification:

  • 360 degree detection range
  • Between 10 seconds to 40 minutes time lag range
  • 30 to 1000 lux photocell range
  • 72mm diameter x 68mm

Loading Details:

  • Up to 1500w (6 amps) of resistive and fluorescent loads
  • Up to 750w (3 amps) of electronic and wire wound transformer loads
  • Up to 500w (2 amps) of 2D, compact fluorescent lamps, LED fittings, lamps and LED drivers
  • Up to 250w (1 amp) of fans

Dimplex HPD001 Slate Effect Hearth Pad

Part No: HPD001

These hearth pads are only suitable for the majority of the electric fires and stoves, in the Dimplex range; apart from the Cadogan, Cassington and Delaware products, which they won’t work with.

Specification:

  • Height: 20mm
  • Width: 800mm
  • Depth: 380mm

JSB FX2202CPD 2 Zone Conventional Fire Alarm Panel Complete With Battery

Part No: FX2202CPD

Easy to install and operate, these conventional fire alarm panels have been designed mainly for smaller installations.

They feature a “one shot” test function, as well as battery voltage alarms, and class change contacts; which can help, when mandatory testing is carried out.

Specification:

  • 2 zone panel c/w battery
  • Input Voltage: 230v ac
  • Operating Voltage: 24v dc
  • Standby Duration: 24 hours
  • Recharge Period: 24 hours
  • Compact design
  • Suitable for surface or semi-flush mounting
  • Dimensions when surface mounted: 270 x 332 x 90mm
  • Dimensions when semi flush mounted: 279 x 332 x 122mm
  • Weight: 5.8kg

Risco ELKIT2GTRI SecuPlace Wireless Security Alarm Kit

Part No: ELKIT2GTRI

SecuPlace is a user friendly wireless burglar alarm intrusion system from the Risco Group, which allows users to control and monitor their home alarm system remotely, via their smartphone, thanks to the unique smartphone app that this system has.

Being wireless, these systems are quick to install, and the remote programming, gives users full control.

Kit Contents:

  • SecuPlace wireless panel (Wifi/GSM)
  • 1 x wireless outdoor siren (ELTRIBELLWB)
  • 1 x wireless multi function keyfob (ELKFSQ)
  • 1 x wireless magnetic door contact (ELMAG)
  • 3 x pet immune pir motion sensor detectors (ELMULTIPET)
  • 1 x Roaming world SIM card

JSB FX2204CPD 4 Zone Conventional Fire Alarm Panel Complete With Battery

Part No: FX2204CPD

Easy to install and operate, these conventional fire alarm panels have been designed mainly for smaller installations.

They feature a “one shot” test function, as well as battery voltage alarms, and class change contacts; which can help, when mandatory testing is carried out.

Specification:

  • 4 zone panel c/w battery
  • Input Voltage: 230v ac
  • Operating Voltage: 24v dc
  • Standby Duration: 24 hours
  • Recharge Period: 24 hours
  • Compact design
  • Suitable for surface or semi-flush mounting
  • Dimensions when surface mounted: 270 x 332 x 90mm
  • Dimensions when semi flush mounted: 279 x 332 x 122mm
  • Weight: 5.8kg

 

 

Heat Outdoors 901374 Shadow 2.0kW Ultra Low Glare Patio Heater In Black

Part No: 901374

The Shadow is a new style of infra red patio heater, which has it’s own unique patented fast lamp change procedure, which takes around 4 minutes.

The low glare from the unit, means that you get less light and more heat; and the parabolic reflector also help to increase the heat.

In fact, on average, you get around 95% less glare, than you would from a similar heater.

As standard, these patio heaters are supplied with a wall bracket, as well as a hinge, for positioning.

Specification:

  • Colour: Black
  • Voltage: 230v
  • Wattage: 2kW
  • Width: 57cm
  • Height: 10cm
  • Depth: 14.5cm
  • IP65 rated (waterproof)
  • 5000 – 7000 hours lamp life
  • Safety guard on heater
  • Quick change lamp system
  • Ideal for patios up to 9 m2
  • 1.5 metres of cable supplied
  • Weight: 2.5kg

Heat Outdoors 901377 Shadow 2.0kW Ultra Low Glare Patio Heater In Silver

Part No: 901377

The Shadow is a new style of infra red patio heater, which has it’s own unique patented fast lamp change procedure, which takes around 4 minutes.

The low glare from the unit, means that you get less light and more heat; and the parabolic reflector also help to increase the heat.

In fact, on average, you get around 95% less glare, than you would from a similar heater.

As standard, these patio heaters are supplied with a wall bracket, as well as a hinge, for positioning.

Specification:

  • Colour: Silver
  • Voltage: 230v
  • Wattage: 2kW
  • Width: 57cm
  • Height: 10cm
  • Depth: 14.5cm
  • IP65 rated (waterproof)
  • 5000 – 7000 hours lamp life
  • Safety guard on heater
  • Quick change lamp system
  • Ideal for patios up to 9 m2
  • 1.5 metres of cable supplied
  • Weight: 2.5kg

Heat Outdoors 901366 Shadow 1.5kW Ultra Low Glare Patio Heater In Black

Part No: 901366

The Shadow is a new style of infra red patio heater, which has it’s own unique patented fast lamp change procedure, which takes around 4 minutes.

The low glare from the unit, means that you get less light and more heat; and the parabolic reflector also help to increase the heat.

In fact, on average, you get around 95% less glare, than you would from a similar heater.

As standard, these patio heaters are supplied with a wall bracket, as well as a hinge, for positioning.

Specification:

  • Colour: Black
  • Voltage: 230v
  • Wattage: 1.5kW
  • Width: 57cm
  • Height: 10cm
  • Depth: 14.5cm
  • IP65 rated (waterproof)
  • 5000 – 7000 hours lamp life
  • Safety guard on heater
  • Quick change lamp system
  • Ideal for patios up to 5 m2
  • 1.5 metres of cable supplied
  • Weight: 2.5kg

Heat Outdoors 901369 Shadow 1.5kW Ultra Low Glare Patio Heater In Silver

Part No: 901369

The Shadow is a new style of infra red patio heater, which has it’s own unique patented fast lamp change procedure, which takes around 4 minutes.

The low glare from the unit, means that you get less light and more heat; and the parabolic reflector also help to increase the heat.

In fact, on average, you get around 95% less glare, than you would from a similar heater.

As standard, these patio heaters are supplied with a wall bracket, as well as a hinge, for positioning.

Specification:

  • Colour: Silver
  • Voltage: 230v
  • Wattage: 1.5kW
  • Width: 57cm
  • Height: 10cm
  • Depth: 14.5cm
  • IP65 rated (waterproof)
  • 5000 – 7000 hours lamp life
  • Safety guard on heater
  • Quick change lamp system
  • Ideal for patios up to 5 m2
  • 1.5 metres of cable supplied
  • Weight: 2.5kg
0