Part No: G02809 / 001G02809
A pack of 20 red reflective adhesive stickers, for the Came Gard GT4 aluminium boom.
Specification:
- Pack of 20 adhesive reflective stickers
- For use with the Came Gard GT4 traffic barriers

Innovate Electrical Supplies Ltd
Supplier of tools and electrical goods
Part No: G02809 / 001G02809
A pack of 20 red reflective adhesive stickers, for the Came Gard GT4 aluminium boom.
Specification:
Part No: 803XA-0300
Auxiliary contacts unit for the Came Gard GT4 parking, traffic barriers, which is used for detecting the parking barriers boom position.
Specification:
Part No: 002RSE / RSE
The Came RSE interface pcb control board, is for the management of two systems, and can also be used for enabling the CRP protocol.
Specification:
Part No: R800 / 001R800
The Came R800 PCB control board decoder card, is a control board for decoding and access control management, via keypad selectors.
Specification:
Part No: R700 / 001R700
The Came R700 PCB control board decoder card, is a control board for decoding and access control management, via the transponder selector.
Specification:
Part No: FA4024CB
Came New Fast 24 volt swing gate motor, which has a built in panel.
CAME New Fast 24V Gate Motor Specification:
Part No: ZL392 / 88003-0083
The ZL392 is the replacement pcb (control board) for the Came Gard GT traffic parking barrier systems.
Specification:
Part No: 43819753
A pack of 10, T8 5 foot retrofit LED tubes, which are for direct to mains / conventional control gear operation, and are supplied with a replacement starter switch.
These T8 5 FT LED tubes, are designed to replace a traditional T8 5′ 58w fluorescent tube.
Specification:
Part No: 44020242
A pack of 10, T8 5 foot retrofit LED tubes, which are for direct to mains / conventional control gear operation, and are supplied with a replacement starter switch.
These T8 5 FT LED tubes, are designed to replace a traditional T8 5′ 58w fluorescent tube.
Specification:
Part No: 44020243
A pack of 10, T8 5 foot retrofit LED tubes, which are for direct to mains / conventional control gear operation, and are supplied with a replacement starter switch.
These T8 5 FT LED tubes, are designed to replace a traditional T8 5′ 58w fluorescent tube.
Specification:
Part No: MTMSKX7B1
CAME BPT MTM 1 way video entry system keypad, is supplied with a white 7″ sleek looking colour LCD display.
These 1 way colour video entry systems, are great, when connected up to a Came electric gate opener, as the 1 way MTM video entry system, will allow you to video call via an app to 4 different IOS or android devices, allowing you to be able to control things at the touch of a button on your mobile phone, which means that you could open your electric gates remotely, to allow access, for example, to allow access for a delivery driver making a delivery, whilst you are at work, or away from your property.
Specification:
Part No: MTMSKX7W1
CAME BPT MTM 1 way video entry system keypad, is supplied with a white 7″ sleek looking colour LCD display monitor.
These 1 way colour video entry systems, are great, when connected up to a Came electric gate opener, as the 1 way MTM video entry system, will allow you to video call via an app to 4 different IOS or android devices, allowing you to be able to control things at the touch of a button on your mobile phone, which means that you could open your electric gates remotely, to allow access, for example, to allow access for a delivery driver making a delivery, whilst you are at work, or away from your property.
Specification:
Part No: PTDCC/3/350/N
A small, compact, match box styled 3w, 350mA series wiring LED driver, designed for use with between 1-3 LED fittings.
These match box designed LED power supplies, are suitable for compatible non dimmable LED fittings, which are series wiring and don’t exceed 3 watts in total.
Specification:
Part No: RN9124
A 15w 24 volt constant voltage output LED driver, for parallel wiring.
These parallel wiring LED power supplies, are suitable for compatible non dimmable LED fittings, which don’t exceed 15 watts in total.
Specification:
Part No: Arete One 20 Litre
The MeacoDry Arete One 20 litre combined dehumidifier and air purifier, from the Meaco Arete range, is one of the most energy efficient dehumidifiers out there, that can benefit your home, by tackling issues with condensation, damp, and mould issues, especially if your regularly leaving washing to dry inside your house in the winter months, where the moisture from your clothes has no where to go.
The MeacoDry Arete One, was produced by 5 years of dedicated design, by a British team, where attention to detail, was carried out, from start to finish, with the end result being Meaco’s most quite and energy efficient dehumidifier range yet.
The MeacoDry Arete One, 20 lite dehumidifier and air purifier, is the perfect choice for tackling damp, condensation and mould issues in your home, garage, basement room, caravan or boat.
These dehumidifiers also come with a laundry mode, which can help, with drying clothes, if your leaving washing to dry inside your home.
If you need a continuous drainage option, there is an adapter included, which can be connected to a standard garden hose.
Specification:
A replacement red handle, for the Santon Speediboil water heaters.
This replacement handle is suitable for 2.5 litre, 5 litre, and 7.5 litre Santon Speediboil boiling water dispensers.
Specification:
Part No: 0585009
The Clifton dimension electric fire in chrome, requires no chimney, and thanks to it’s patented holographic technology, these electric fire produce a very realistic flame effect.
Specification:
Part No: 0585008
The Clifton dimension electric fire in brass, requires no chimney, and thanks to it’s patented holographic technology, these electric fire produce a very realistic flame effect.
Specification:
Part No: 806SL-0280 / SELT1BDG
A 12 button surface mounted wired keypad in grey, with blue back lighting, and BUS CXN technology.
Specification:
Please note that in order for these keypads to operate, you will also need either an R800 card (if you have an R800 port on your system), or an S0002P (806SL-0370), dual channel control card, if you don’t have an R800 port available. Both these items are available to buy online via our website.
Part No: 22185
These 1kg wall mounted dry powder fire extinguishers are designed for treating small fires in the home, which can easily be extinguished, before they cause any major damage.
They are not recommended for use on large fires, which have already spread; and would need the fire brigade to tackle.
They are supplied with a wall mounting bracket and pressure gauge.
These dry powder fire extinguishers are also suitable for marine use.
Specification: