Consort Claudgen RAC1516 Screenzone 16kW Commercial Recessed 3 Phase Air Curtain

Part No: RAC1516

Consort Claudgen 16kW, 3 phase recessed commercial air curtain, designed for use in suspended ceilings above doorways.

Ideal for use in shops, offices, hotels and commercial premises.

Specification:

  • 3 phase
  • Wattage: 16kW
  • Recessed mounted in suspended ceiling – will fit a recess as shallow as 230mm (175mm for the unit + 55mm free air)
  • Maximum mounting height 3.4 metres
  • 2 heat settings and 2 fan speeds with the remote switch
  • Supplied with HE8408 remote switch
  • Optional controllers available (ACMC – air curtain master controller) & (ACTS – air curtain temperature sensor)
  • Built in safety cut out for thermal overload protection
  • Weight: 21kg
  • Dimensions: (L)1550mm x (D)175mm x (W)339mm

Please note that the optional controllers, would need to be purchased separately, as these commercial air curtains are only supplied with a standard remote switch.

Consort Claudgen RAC1514 Screenzone 14kW Commercial Recessed 3 Phase Air Curtain

Part No: RAC1514

Consort Claudgen 14kW, 3 phase recessed commercial air curtain, designed for use in suspended ceilings above doorways.

Ideal for use in shops, offices, hotels and commercial premises.

Specification:

  • 3 phase
  • Wattage: 14kW
  • Recessed mounted in suspended ceiling – will fit a recess as shallow as 230mm (175mm for the unit + 55mm free air)
  • Maximum mounting height 3.4 metres
  • 2 heat settings and 2 fan speeds with the remote switch
  • Supplied with HE8408 remote switch
  • Optional controllers available (ACMC – air curtain master controller) & (ACTS – air curtain temperature sensor)
  • Built in safety cut out for thermal overload protection
  • Weight: 21kg
  • Dimensions: (L)1550mm x (D)175mm x (W)339mm

Please note that the optional controllers, would need to be purchased separately, as these commercial air curtains are only supplied with a standard remote switch.

Consort Claudgen RAC1312 Screenzone 12kW Commercial Recessed 3 Phase Air Curtain

Part No: RAC1312

Consort Claudgen 12kW, 3 phase recessed commercial air curtain, designed for use in suspended ceilings above doorways.

Ideal for use in shops, offices, hotels and commercial premises.

Specification:

  • 3 phase
  • Wattage: 12kW
  • Recessed mounted in suspended ceiling – will fit a recess as shallow as 230mm (175mm for the unit + 55mm free air)
  • Maximum mounting height 3.4 metres
  • 3 heat settings
  • Supplied with HE8408 remote switch
  • Optional controllers available (ACMC – air curtain master controller) & (ACTS – air curtain temperature sensor)
  • Built in safety cut out for thermal overload protection
  • Weight: 19.5kg
  • Dimensions: (L)1350mm x (D)175mm x (W)339mm

Please note that the optional controllers, would need to be purchased separately, as these commercial air curtains are only supplied with a standard remote switch.

CAME 119RIA042 Frog Motor Release Locking Lever

Part No: 119RIA042

Came motor release locking lever, for the Came Frog motors.

Specification:

  • Frog motor release locking lever

Please note actual product may vary slightly from the product image shown on this website.

Neon PC10003 8 Zone Conventional Fire Alarm Panel

Part No: PC10003

The Neon 8 zone conventional fire alarm panel are very similar to the C-Tec conventional panels, in the fact that they will work with any normal conventional detector.

The Neon conventional panels feature code or key entry, as well as 4 sounder circuits, and an active end of line monitored zones.

Specification:

  • Mains Power: 230V AC (50Hz)
  • 8 zone conventional fire alarm panel
  • Code or key entry
  • Takes 2 x 7Ah batteries (panel supplied less batteries)
  • 24v DC auxiliary output
  • Remote reset input
  • Output delays
  • Active end of line monitored zones
  • Height: 315mm
  • Width: 425mm
  • Depth: 105mm

Please click here to view the pdf specification sheet on these Neon fire alarm panels

Neon PC10002 4 Zone Conventional Fire Alarm Panel

Part No: PC10002

The Neon 4 zone conventional fire alarm panel are very similar to the C-Tec conventional panels, in the fact that they will work with any normal conventional detector.

The Neon conventional panels feature code or key entry, as well as 4 sounder circuits, and an active end of line monitored zones.

Specification:

  • Mains Power: 230V AC (50Hz)
  • 4 zone conventional fire alarm panel
  • Code or key entry
  • Takes 2 x 7Ah batteries (panel supplied less batteries)
  • 24v DC auxiliary output
  • Remote reset input
  • Output delays
  • Active end of line monitored zones
  • Height: 315mm
  • Width: 425mm
  • Depth: 105mm

Please click here to view the pdf specification sheet on these Neon fire alarm panels

Neon PC10001 2 Zone Conventional Fire Alarm Panel

Part No: PC10001

The Neon 2 zone conventional fire alarm panel are very similar to the C-Tec conventional panels, in the fact that they will work with any normal conventional detector.

The Neon conventional panels feature code or key entry, as well as 4 sounder circuits, and an active end of line monitored zones.

Specification:

  • Mains Power: 230V AC(50Hz)
  • 2 zone conventional fire alarm panel
  • Code or key entry
  • Takes 2 x 7Ah batteries (panel supplied less batteries)
  • 24v DC auxiliary output
  • Remote reset input
  • Output delays
  • Active end of line monitored zones
  • Height: 315mm
  • Width: 425mm
  • Depth: 105mm

Please click here to view the pdf specification sheet on these Neon fire alarm panels

Zip 93702 Micropurity 0.2 Micron Filter For The Zip Hydrotaps

Part No: 93702

A 0.2 micron Zip Hydrotap filter, which contains an antimicrobial, which is naturally occurring, which stops bacteria growth from within the filter.

Specification:

  • Reduces bacteria growth, lead and limescale
  • Reduces chlorine, taste and odour
  • 6813 litre filtration capacity at a flow rate of 5.678 l/min (commercial)
  • Meets the standards of AS/NZS 3497, WM-035001 and AS/NZS 4348

NightSearcher HazStar Rechargeable LED Hazard Warning Light And Work Light

Part No: HazStar

The HazStar rechargeable 2 in 1 LED roadside triangle hazard warning light, is a great product, and an ideal product for any motorist to keep in the boot of their car with them, to assist them, in the event of a roadside incident, such as a puncture, or similar incident.

This clever unit which works as a work light, can be used in the event of a car breakdown, for warning oncoming traffic of the emergency situation.

The HazStar LED hazard warning light can also be used for illuminating a work area, which would work well, if you needed some light for carrying out a roadside repair, or changing a tyre by the side of the road.

HazStar Red Triangle Warning Light Specification:

  • Different Modes: Work Light: (High / Medium / Low) / Hazard Lights: Flashing
  • Beam Distance In Work Light Mode: Up to 15 metres
  • Beam Distance In Hazard Lights Mode: Up to 100 metres
  • Lumen Output: 2000 lumens at full power in work light mode
  • Work Lights Run Time: Up to 6 hours
  • Hazard Lights Run Time: Up to 9 hours
  • Power Source: Rechargeable lithium ion battery
  • Charging Time: 5 hours
  • IP Rating: IP65
  • Dimensions: 255 x 90 x 34mm
  • Weight: 0.956kg

Please click here to view the manufacturer’s pdf specification sheet on the HazStar

CAME LOCK81 Single Cylinder Release Electric Lock

Part No: LOCK81

The Came LOCK81 is a single sided release electronic latch, recommended for use with electric gates, which are more than 7ft each in length.

CAME LOCK 81 Specification:

  • Power Supply: 12V AC/DC (50Hz)
  • Absorption: 15

CAME FTX-S 24V DC Above Ground Electric Gate Opening Kit For A Single Swing Gate Up To 2 Metres

Part No: FTX-S

The Came FTX-S, 24v dc above ground articulated arm style electric gate opening kit, for a single swing gates with a gate leaf of up to 2 metres, with a maximum weight of 200kg, is a swing gate kit for suitable residential or condominium applications, which have either small or medium sized pillars.

FTX-S Swing Gate Kit Contents:

1 x 801MB-0110 – 24v self-locking gear motor with control panel, dip switch settings and articulated arm C maximum of 250mm
1 x AF43S – Plug in radio frequency card (433.9MHz)
2 x 806TS-0122 (TOPD4RKS) – 4 channel double frequency rolling code transmitter (gate remote control key fob)
1 x TA433N – Tuned antenna for 433MHz)
1 x DIR10 – Pair of safety photocells (10 metre range)

CAME FTX-P 24V DC Above Ground Electric Gate Opening Kit For A Pair Of Swing Gates Up To 2 Metres Each Leaf

Part No: FTX-P

The Came FTX-P, 24v dc above ground articulated arm style electric gate opening kit, for a pair of swing gates up to 2 metres each leaf, with a maximum weight of 200kg per leaf, is a swing gate kit for suitable residential or condominium applications, which have either small or medium sized pillars.

FTX-P Swing Gate Kit Contents:

1 x 801MB-0110 – 24v self-locking gear motor with control panel, dip switch settings and articulated arm C maximum of 250mm
1 x 801MB-0120 – 24v self-locking gear motor with articulated arm C maximum of 250mm
1 x AF43S – Plug in radio frequency card (433.9MHz)
2 x 806TS-0122 (TOPD4RKS) – 4 channel double frequency rolling code transmitter (gate remote control key fob)
1 x TA433N – Tuned antenna for 433MHz)
1 x DIR10 – Pair of safety photocells (10 metre range)

CAME FTL-P 24V DC Above Ground Electric Gate Opening Kit For A Pair Of Swing Gates Up To 2 Metres Each Leaf

Part No: FTL-P

The Came FTL-P, 24v dc above ground articulated arm style electric gate opening kit, for a pair of swing gates up to 2 metres each leaf, with a maximum weight of 200kg per leaf, is a swing gate kit for suitable residential or condominium applications, which have either small or medium sized pillars.

FTL-P Swing Gate Kit Contents:

  • 1 x 801MB-0080 – 24v self-locking gear motor with control panel, dip switch settings and articulated arm
  • 1 x 801MB-0080 – 24v self-locking gear motor with articulated arm C maximum of 150mm
  • 1 x AF43S – Plug in radio frequency card (433.9MHz)
  • 2 x 806TS-0102 (TOPD4FKS) – 4 channel dual frequency rolling code transmitter (gate remote control key fob)
  • 1 x TA433N – Tuned antenna for 433MHz)
  • 1 x DIR10 – Pair of safety photocells (10 metre range)

Valor 05347A1 Black Beauty 4kW Radiant Gas Fire

Part No: 05347A1

The Valor Black Beauty radiant gas fire, is suitable for brick chimney, pre-fabricated, as well as pre-cast flues, and has a maximum heat output of 4kW.

Specification:

  • Colour: Black
  • Maximum Heat Output: 4kW
  • 6 heat settings
  • Height: 625mm
  • Width: 657mm
  • Depth: 204mm

Valor 243160 Brazilia F5S 1.5kW Beige And Oak Gas Wall Heater

Part No: 243160

The Valor Brazilia gas wall heater, with it’s slim design, is ideal for smaller rooms, where space is limited, and the beige and oak colour, works well with traditional styles, to create a warm feeling in your property.

Specification:

  • Colour: Beige & oak
  • Oak effect side panels
  • Heat Output: 1.5kW
  • 3 heat settings
  • Natural gas (there is an optional LPG conversion kit, which would need to be purchased separately)
  • Height: 394mm
  • Width: 450mm
  • Depth: 128mm
  • BEAB and CE certification

CAME G4-DX GARD 4 Deluxe 24V Parking Barrier Kit For Road Widths Of Up To 3.75 Metres

Part No: G4-DX

The Came 24 volt Gard G4-DX Deluxe automatic car park traffic barrier opening kit, is a robust, modern looking barrier kit, which has a special release system designed for the barrier boom, which allows the boom to disengage, if it takes an impact from a vehicle.

This special release system on the boom, not only reduces repair costs, in the event of it being hit by a vehicle, it also reduces the time that it would take to carry out repairs.

Automatic Parking Barrier Kit Contents:

  • 1 x G4040Z Barrier unit
  • 1 x G03572 Barrier Arm (4 metre maximum length)
  • 1 x Pack of 20 reflective stickets
  • 1 x Pair Of Safety Photocells, with a 10 metre range
  • 1 x Fixed Barrier Support
  • 1 x Flashing light
0