A 230 volt, 3 watt non maintained LED downlight, with self test, which is supplied with three different bezels; an aluminium one, as well as a white bezel, and also a black bezel.

These LED self-test downlights, provide a minimum of 3 hours emergency illumination, and the integral self test feature allows for testing at pre-programmed intervals.

Specification:

• Input Voltage: 230V (50Hz)
• IP Rating: IP20
• Wattage: 3 watts
• Light Colour: 6000K (daylight)
• Cable Length: 0.3 metres
• Lumens In Emergency Mode: 120LM
• Non maintained operation
• Diameter: 42mm
• Projection: 2mm
• Recessed Depth: 22mm
• Minimum Void: 75mm
• Cut-Out: 34mm
• Weight: 0.29kg

A 230 volt, 5 watt non maintained LED emergency downlight, which will illuminate in green, when it’s in charge mode, and will illuminate white, when power is lost.

Specification:

• Input Voltage: 230 volts (50Hz)
• IP Rating: IP20
• Wattage: 5w
• Light Colour: 6000K (daylight)
• Lumens In Emergency Operation: 340LM
• Diameter: 68mm
• Length: 423mm
• Height: 47mm
• Recessed Depth: 45mm
• Minimum Void: 240mm
• Cut-Out Diameter: 55mm
• Weight: 0.745kg
• Finish: White
• Diffuser: Clear
• Non maintained operation
• Supplied with inverter and battery pack
• 3 hour emergency operation

A 230 volt, 2 x 3 watt non maintained LED twin emergency spotlight, with self test, which is robust, and lightweight.

These LED self-test twin spots, provide a minimum of 3 hours emergency illumination, and the integral self test feature allows for testing at pre-programmed intervals.

Specification:

• Input Voltage: 230 volts (50Hz)
• IP Rating: IP65
• Wattage: 2 x 3 watts
• Light Colour: Daylight (6000K)
• Lumens In Emergency Mode: 490LM
• Non maintained operation
• Height: 301mm
• Width: 280mm
• Projection: 90mm
• Material: Polycarbonate
• Finish: White

3 hour maintained 3 watt LED downlighter in brushed chrome, with the option of converting to a non-maintained version if required.

These maintained emergency LED downlights can be converted to a non-maintained version, simply just by removing a link inside.

Product Specification:

• Colour: Satin Chrome
• Voltage: 220 – 240v, 50/60Hz
• IP20 rated
• Cut out: 60mm
• 3 hour maintained emergency operation
• 24 hours charge time
• Lumen output: 163lm
• Battery: 3.6v, 3Ah

3 hour non maintained 1 watt LED downlighter in brushed chrome.

Please note that these non maintained emergency LED downlights can’t be converted to a maintained version.

If a maintained emergency LED downlight is required, these products are available to buy online under the emergency lighting category on this website.

A T5 8w curved style maintained emergency exit box with a white steel body, and white and green polycarbonate diffuser, with the running man arrow down legend included.

Specification:

• Lamp Type: T5 8w fluorescent
• Lumen Output: 100lm
• 3 hour emergency duration
• IP Rating: IP20
• Battery: 2.4v 4.8Ah nickel cadmium
• Length: 441mm
• Width: 220mm
• Depth: 67mm

Please note these emergency exit boxes can be converted to operate as a non maintained fitting by simply removing the switch live link.

Part No: E/ME/M3F/110

8 watt, 110 volt emergency weatherproof bulkhead light, supplied complete with snap fit gear tray and diffuser, to make installation easy.

• 18 metre viewing distance
• 3 hour maintained operation
• Cable entry provided on both ends of the fitting, along with the back of the fitting, allowing BESA box and conduit connection
• Height: 75mm
• Width: 350mm
• Depth: 90mm
• 1 year guarantee

Part No: OM680/T5/TI

The ELP OM680/T5/TI, is an emergency lighting module, which covers T5 lamps between 14 – 80 watts.

These emergency lighting modules, also cover compact fluorescent lamps between 32 – 80 watts, as well as 38w 2D lamps and 55w 2D lamps.

Specification:

• Length: 210mm
• Width: 40mm
• Height: 28mm
• Fixing Centres: 202mm

Part No: EML 8FK

Semi Recessing Kit For EML 8NM Which Enables The EML 8NM Bulkhead Fitting To Be Fitted Semi Flush To Diffuser.

(Please note picture shown shows the bulkhead fitting semi recessed with this kit)

Part No: EML 8FPM

8W Fully Recessed Maintained Emergency Luminaire With Prismatic Polycarbonate Diffuser.

• 3 hour maintained
• Can be wired non maintained
• Control gear housed in galvanised flush box
• Test button incorporated
• Available in white, polished chrome & polished brass

Please specify below the colour that you require

Part No: EML 8M

8W Maintained IP65 Bulkhead.

• Compact design
• Hinged gear tray
• Clear polycarbonate high light output freznal diffuser
• ABS base
• Central & rear besa box entry as well as end knockouts
• 70 lumens
• Test button incorporated
• 3 hour maintained
• Dimensions: Length – 336mm, Width – 80mm, Depth – 105mm

Part No: EML 8MFP

8W Maintained Stylish Edge-Lit Recessed Exit Sign.

• 3 hour maintained
• Test button incorporated
• Can be wired non maintained
• Available in white, polished chrome and polished brass

Please specify below the colour that you require and also running man arrow direction required

Part No: EML 8MHP

8W Maintained Edge Lit Double Sided Exit Sign.

• 3 hour maintained (can be wired non maintained)
• Supplied with chain and mounting batten
• Test button incorporated
• Available in white, polished chrome & polished brass

Please specify below the colour that you require and also the running man arrow direction

Part No: EML 8NM

8W Non Maintained IP65 Bulkhead.

• Compact design
• Hinged gear tray
• Clear polycarbonate high light output freznal diffuser
• ABS base
• Central & rear besa box entry as well as end knockouts
• 70 lumens
• Test button incorporated
• 3 hour non maintained
• Dimensions: Length – 336mm, Width – 80mm, Depth – 105mm

Part No: EML 8NMFP

8W Non Maintained Stylish Edge-Lit Recessed Exit Sign.

• 3 hour non maintained
• Test button incorporated
• Available in white, polished chrome and polished brass

Please specify below the colour that you require and also running man arrow direction required

Part No: EML EX8M

3 Hour Maintained Emergency Exit Box Sign.

• Single sided exit sign available in white, polished chrome & polished brass
• Complete with threshold light panel and choice of LG legends
• Test button incorporated
• 3 hour maintained emergency
• Can be wire non maintained
• Dimensions: Length – 380mm, Width – 198mm, Depth – 67mm

Please specify which colour you require below and also which legend that you require

Part No: EML EX8NM

3 Hour Non Maintained Emergency Exit Box Sign.

• Single sided exit sign available in white, polished chrome & polished brass
• Complete with threshold light panel and choice of LG legends
• Test button incorporated
• 3 hour non maintained emergency
• Dimensions: Length – 380mm, Width – 198mm, Depth – 67mm

Please specify which colour you require below and also which legend that you require

Part No: EML EXSK

Self Adhesive Legend Kit Designed For Use On The EML 8NM & EML 8M Bulkheads And Also The EMLDDPC Drop Down Cover.

Part No: EML LEDM

LED Maintained Edge Lit Double Sided Exit Sign.

• 3 hour maintained (can be wired non maintained)
• Supplied with chain and mounting batten
• Test button incorporated
• Available in white, polished chrome & polished brass

Please specify below the colour that you require and also the running man arrow direction

Part No: EML TS401H

IP20 Non Maintained Emergency Twin Spot.

• 1 x 12v 7AH sealed lead acid battery
• Test button incorporated
• Replacement lamps available (see product code EML TSL20)
• 1 hour non-maintained