Part No: AHP-06

6kW air source heat pump, designed for domestic hot water, underfloor heating; or high output radiators.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

• Powered by a Panasonic Compressor
• Japanese super inverter monobloc technology utilised
• Electronic LED controller
• Built in circulation pump
• Easy installation
• Galvanised and painted cabinet
• Compatible with underfloor heating or high output radiators
• Quiet running

Specifications

• Heating output: 6kW
• C.O.P: 20 degrees C – 50 degrees C: 3.6
• Power (A): 7.7
• Voltage: 220/1/150
• Water Output L/h: >_150
• Noise dB(A): <_52
• Dimensions: 1010 x 370 x 620mm
• Weight: 65kg

Part No: AHP-05.

5kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 5kW
• C.O.P: 20 degrees C – 50 degrees C: >_4
• Power cont/Max A: 1.4/1.8
• Voltage: 240V
• Water output L/h: >_150
• Noise dB(A): <_49
• Dimensions: 100x30x70cm
• Weight: 65kg
• Utilises R410a refrigerant

Part No: AHP-10.

10kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 10kW
• C.O.P: 20 degrees C – 50 degrees C: >_4
• Power cont/Max A: 10.5/14.1
• Voltage: 240V
• Water output L/h: >_250
• Noise dB(A): <_48
• Dimensions: 100x30x63cm
• Weight: 65kg
• Utilises R410a refrigerant

Part No: AHP-15.

15kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 15kW
• C.O.P: 20 degrees C – 50 degrees C: >_4
• Power cont/Max A: 15.5/20.9
• Voltage: 240V
• Water output L/h: >_375
• Noise dB(A): <_48
• Dimensions: 100x30x73cm
• Weight: 85kg
• Utilises R410a refrigerant

Part No: AHP-20.

20kW Air Source Heat Pump, designed for domestic hot water; and underfloor/radiator heating.

Nowadays Air Source Heat Pumps are a very good choice for home heating, especially in areas which have less severe winters.

These Air Source Heat Pumps work by a motor, which is powered by electricity, which supplies more energy than it consumes when it takes out the heat from the surrounding air.

Infact for every unit of energy that is carried in as electricity, several units of heat are delivered from this, making these air source heat pumps four times more efficient than conventional electric.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 20kW
• C.O.P: 20 degrees C – 50 degrees C: >_4
• Power cont/Max A: 6.9/9.2
• Voltage: 415V
• Water output L/h: >_500
• Noise dB(A): <_50
• Dimensions: 111x43x93cm
• Weight: 102kg
• Utilises R410a refrigerant

Part No: GHP-10.

10kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 10.2kW
• C.O.P: 20 degrees C – 50 degrees C: >_5
• Power cont/Max A: 4.3/5.4
• Voltage: 240V
• Water output L/h: >_250
• Noise dB(A): <_53
• Dimensions: 85x48x60cm
• Weight: 65kg
• Utilises R410a refrigerant

Part No: GHP-15.

15kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 15.2kW
• C.O.P: 20 degrees C – 50 degrees C: >_5
• Power cont/Max A: 7.5/9.4
• Voltage: 415V
• Water output L/h: >_375
• Noise dB(A): <_55
• Dimensions: 85x48x60cm
• Weight: 122kg
• Utilises R410a refrigerant

Part No: GHP-20.

20kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 20.4kW
• C.O.P: 20 degrees C – 50 degrees C: >_5
• Power cont/Max A: 8.6/10.4
• Voltage: 415V
• Water output L/h: >_500
• Noise dB(A): <_58
• Dimensions: 100x65x60cm
• Weight: 198kg
• Utilises R410a refrigerant

Part No: GHP-30.

30kW Ground Source Heat Pump.

These Ground Source Heat Pumps circulate water through the pipes which are buried in the ground, in order to extract the heat which is stored below the earth’s surface.

In the United Kingdom the average ground temperature just below the surface is between 8 – 13 degrees C. This temperature remains constant all year round. The temperature of the water in the pipes is lower than the surrounding ground, so it actually warms up slightly. The returning water is chilled back down by the heat pump, where it is used to heat up the refrigerant. By compressing this “warmed” refrigerant the temperature is further more increased before then being transfered across to the buildings heating system. Generally the heating water output from the heat pump is typically 45 – 65 degrees C.

Features

• Powered by a Toshiba Compressor
• Japanese Inverter Technology utilised
• Digital LED Controller
• Titanium Heat Exchange
• Oscillating air vanes for the dissipation of cold air
• Auto restart feature, designed for when power cuts occur
• Intelligent defrost mode
• Quiet running
• Low running costs
• 80% more efficient than conventional electric

Specifications

• Heating output: 33kW
• C.O.P: 20 degrees C – 50 degrees C: >_5
• Power cont/Max A: 15/18.8
• Voltage: 415V
• Water output L/h: >_750
• Noise dB(A): <_58
• Dimensions: 100x65x60cm
• Weight: 234kg
• Utilises R410a refrigerant