Innovate Electrical Supplies Ltd Products

Toshiba Easyfit KFR6M-66/70 6 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR6M-66/70 Interconnecting 6 metre pipe extension kit for the KFR66-GW/X1c and the KFR70 Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements. Please note that the Easyfit air conditioning units are pre-gased up to 6 metres. By using this 6 metre extension kit, you will need an air conditioning engineer to top up the gas.

Toshiba Easyfit KFR4M-66/70 4 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR4M-66/70 Interconnecting 4 metre pipe extension kit for the KFR66-GW/X1c and the KFR70 Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

Toshiba Easyfit KFR2M-66/70 2 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR2M-66/70 Interconnecting 2 metre pipe extension kit for the KFR66-GW/X1c and the KFR70 Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

Toshiba Easyfit KFR6M-32/50/51 6 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR6M-32/50/51 Interconnecting 6 metre pipe extension kit for the KFR32-GW/X1c and the KFR51-GW/X1c Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements. Please note that the Easyfit air conditioning units are pre-gased up to 6 metres. By using this 6 metre extension kit, you will need an air conditioning engineer to top up the gas.

Toshiba Easyfit KFR4M-32/50/51 4 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR4M-32/50/51 Interconnecting 4 metre pipe extension kit for the KFR32-GW/X1c and the KFR51-GW/X1c Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

Toshiba Easyfit KFR2M-32/50/51 2 Metre Pipe Extension Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR2M-32/50/51 Interconnecting 2 metre pipe extension kit for the KFR32-GW/X1c and the KFR51-GW/X1c Easy Fit Air Conditioning Units. The copper pipes are supplied pre insulated with flare nut ends and inline connectors for easy installation to existing pipe work. Available in all system sizes of 1/4,3/8 1/2 and 5/8 These extension kits are available in lengths of 1m up to 6m to suit individual requirements.

Toshiba Easyfit BRKT-KMS

Wed, 08 Sep 2010 01:44:17 +0000

Part No: BRKT-KMS Wall mounting brackets for the outdoor Condensing units of the Toshiba Easyfit KMS Range. These brackets are only designed for use with the following models, KMS-9918/X1c and the KMS-121224/X1c. These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall. They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas. Supplied with the kit are rubber anti vibration mounting feet to adsorbe any compressor vibration on start-up of unit.

Toshiba Easyfit BRKT-KFR70

Wed, 08 Sep 2010 01:44:17 +0000

Part No: BRKT-KFR70 Wall mounting brackets for the outdoor Condensing unit of the Toshiba Easyfit KFR70. These brackets are only designed for use with this model. These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall. They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas. Supplied with the kit are rubber anti vibration mounting feet to adsorbe any compressor vibration on start-up of unit.

Toshiba Easyfit BRKT-UNI Wall Mounting Bracket Kit For Outdoor Unit KFR32/50/51/66

Wed, 08 Sep 2010 01:44:17 +0000

Part No: BRKT-UNI Wall mounting brackets for the outdoor Condensing unit of the Toshiba Easyfit air-conditioning units. These brackets are designed for use with the following models, KFR32-GW/X1c, KFR51-GW/X1c; and the KFR66-GW/X1c. These brackets are very easy to install and come complete with all necessary hardware to mount then to the wall. They are easy to adjust and also benefit from a levelling adjustment for uneven walls. There are two mounting positions for each arm enabling more choice of equipment mounting in difficult areas. Supplied with the kit are rubber anti vibration mounting feet to adsorbe any compressor vibration on start-up of unit.

Toshiba Easyfit THP-12 12kW Swimming Pool Heater Inverter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR-THP12 In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year. Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both. The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy. A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool. Features

Japanese Inverter Technology
Digital LED Controller
Titanium Heat Exchange
Oscillating air vanes for dissipation of cold air
Auto Restart after a power cut
Intelligent Defrost
Quiet Running
Low Running Costs
80% More Efficient Than Conventional Electric

Specifications

Power Rating: 220-240 Volts, 1Ph/50Hx
Heating Capacity: 12kW
C.O.P: >6.2
Advised Pool Volume m3 (with insulated pool cover): 40-60
Advised Water flux m3/h: >4
Rated power / Max power (kW): 1.8/2.4
Rated current: Max current (A): 8.2/11.0
Heating Exchanger: Titanium in PVC (Patent Design)
Compressor: Rotary
Fan direction: Horizontal
Noise (db(A)): <48
Water pipe in-out spec (inch): 1.5
Net dimension - LxWxH (mm): 1000x300x700
Packing dimension - LxWxH (mm): 1080x360x700
Net weight / Gross weight (kg): 65/70

Toshiba Easyfit THP-09 9kW Swimming Pool Heater Inverter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR-THP09 In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year. Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both. The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy. A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool. Features

Japanese Inverter Technology
Digital LED Controller
Titanium Heat Exchange
Oscillating air vanes for dissipation of cold air
Auto Restart after a power cut
Intelligent Defrost
Quiet Running
Low Running Costs
80% More Efficient Than Conventional Electric

Specifications

Power Rating: 220-240 Volts, 1Ph/50Hx
Heating Capacity: 9kW
C.O.P: >6.2
Advised Pool Volume m3 (with insulated pool cover): 30-40
Advised Water flux m3/h: >4
Rated power / Max power (kW): 1.4/1.8
Rated current: Max current (A): 6.4/8.2
Heating Exchanger: Titanium in PVC (Patent Design)
Compressor: Rotary
Fan direction: Horizontal
Noise (db(A)): <48
Water pipe in-out spec (inch): 1.5
Net dimension - LxWxH (mm): 940x285x550
Packing dimension - LxWxH (mm): 1020x360x620
Net weight / Gross weight (kg): 52/57

Toshiba Easyfit THP-06 6kW Swimming Pool Heater Inverter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: KFR-THP06 In the UK all swimming pools need to be heated in some way, in order to get the maximum usage from them each year. Up until quite recently, the only options available for heating a swimming pool, have been to heat the pool by Gas, Electric, or Oil; all of which are either very expensive to run or difficult and expensive to install, or both. The Toshiba Easyfit range of heat pump pool heaters are both easy to install and are inexpensive to run. They also have the feature of Titanium Heat Exchangers for longer life expectancy. A heat pump does not directly generate heat, it simply captures it and then transfers it from the air into the water in your pool, giving an efficient and environmentally friendly system for heating your swimming pool. Features

Japanese Inverter Technology
Digital LED Controller
Titanium Heat Exchange
Oscillating air vanes for dissipation of cold air
Auto Restart after a power cut
Intelligent Defrost
Quiet Running
Low Running Costs
80% More Efficient Than Conventional Electric

Specifications

Power Rating: 220-240 Volts, 1Ph/50Hx
Heating Capacity: 6kW
C.O.P: >6.2
Advised Pool Volume m3 (with insulated pool cover): 20-30
Advised Water flux m3/h: >4
Rated power / Max power (kW): 0.98/1.4
Rated current: Max current (A): 4.6/6.4
Heating Exchanger: Titanium in PVC (Patent Design)
Compressor: Rotary
Fan direction: Horizontal
Noise (db(A)): <48
Water pipe in-out spec (inch): 1.5
Net dimension - LxWxH (mm): 940x285x550
Packing dimension - LxWxH (mm): 1020x360x620
Net weight / Gross weight (kg): 45/50

Xpelair XIL150T 6" (150mm) Inline Shower Fan Kit With Timer

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91245AW 6" (150mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Built in overrun timer (adjustable at installation from 3-15 minutes)
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 37
Electrical power rating: 25w
Weight: 2.1kg
Ducting diameter: 150mm
Hole size: 165mm
IP rating: IPX2
2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL150 6" (150mm) Inline Shower Fan Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91244AW 6" (150mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 37
Electrical power rating: 25w
Weight: 2.1kg
Ducting diameter: 150mm
Hole size: 165mm
IP rating: IPX2
2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL125T 5" (125mm) Inline Shower Fan Kit With Timer

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91243AW 5" (125mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Built in overrun timer (adjustable at installation from 2-20 minutes)
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 18
Electrical power rating: 20w
Weight: 1.83kg
Ducting diameter: 125mm
Hole size: 140mm
IP rating: IPX2
2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL125 5" (125mm) Inline Shower Fan Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91242AW 5" (125mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 18
Electrical power rating: 20w
Weight: 1.83kg
Ducting diameter: 125mm
Hole size: 140mm
IP rating: IPX2
2 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL100T 4" (100mm) Inline Shower Fan Kit With Timer

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90330AW 4" (100mm) Single speed, inline shower fan extract system with timer, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit with timer, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Built in overrun timer (adjustable at installation from 2-20 minutes)
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 13
Electrical power rating: 12w
Weight: 0.9kg
Ducting diameter: 100mm
Hole size: 115mm
IP rating: IPX2
3 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair XIL100 4" (100mm) Inline Shower Fan Kit

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90329AW 4" (100mm) Single speed, inline shower fan extract system, which conforms to Building Regulations Part F1 and removes humid and moist air via a neat grille installed directly over the shower out to an external grille outside.

Inline shower fan kit, supplied complete with 3 metres of flexible ducting, four worm drive clips, inline backdraught shutter, internal ceiling grille; and outside soffit/wall grille
Single speed inline showerfan system
Operated by remote switch (in a bathroom whether by remote pullcord switch or wired to the lighting circuit)
Fan can also be wired to a water flow switch fitted in the pipework to the shower control to switch On/Off when the shower is in use
Extract performance (litres/second): 13
Electrical power rating: 12w
Weight: 0.9kg
Ducting diameter: 100mm
Hole size: 115mm
IP rating: IPX2
3 year guarantee

Please click here to download the PDF document on this in-line shower fan kit

Xpelair HC301 Thermostatic Controller For The WH30 And WHP30 3kW Fan Heaters

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 21877AW

On/Off switch
Fan only/fan and heater options
Variable thermostatic control
Suitable for surface or recessed applications
Colour: white
For use with the WH30 & WHP30 fan heaters
Dimensions: W(210mm) x H(86mm) x D(41mm)
3 year guarantee

Xpelair WHP30 3kW Wall Mounted Fan Heater With Thermostatic Controller

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 89999AW The WHP30 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

3kW commercial fan heater
Supplied complete with HC301 thermostatic controller
Compact wall hung design
Flame retardant polycarbonate / glass filled nylon casing
Spiral wound Nichrome wire element
Grey wall bracket
Multi directional positioning - 180 degrees swivel and 45 degrees vertical tilt then locked in position
Double insulated with two thermal cut outs
Single phase product
Finished in a white and grey casing
For cool air circulation and thermostatic heating control use the HC301 controller (supplied with this fan heater)
Air delivery (litres/second): 83
Weight: 2.9kg
1 year guarantee
BEAB approved
CE approved

Please click here to download the PDF document on this wall mounted fan heater

Xpelair WH60 6kW Wall Or Ceiling Mounted Fan Heater

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 00147AC The WH60 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

6kW industrial fan heater
Wall or ceiling mounting options available
Heavy duty steel casing with die cast aluminium guards
Spiral wound Nichrome wire element
Metal wall bracket
Multi directional positioning - 180 degrees swivel and 45 degrees vertical tilt then locked in position
Wall bracket cover
Double safety feature of thermal cut out with auto reset and one shot fusible link
Suitable for Single and Three Phase supplies
HC301 controller also available for use with this Space Heater for cool air circulation and thermostatic heating control (controller not supplied)
Operated by remote switch (not supplied)
Air delivery (litres/second): 86
Weight: 6.5kg
1 year guarantee
BEAB approved
CE approved

Please click here to download the PDF document on this wall mounted fan heater

Xpelair WH30 3kW Wall Mounted Fan Heater

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 98392AC The WH30 Space Heater is ideal for use in factories, warehouses, workshops, canteens; and is also perfect for use in public areas of shops, waiting rooms, offices, garages, hospitals, large stores and even agricultural applications.

3kW industrial fan heater
Compact wall hung design
Heavy duty steel casing with die cast aluminium guards
Spiral wound Nichrome wire element
Metal wall bracket
Multi directional positioning - 180 degrees swivel and 45 degrees vertical tilt then locked in position
Wall bracket cover
Double safety feature of thermal cut out with auto reset and one shot fusible link
Single phase product
HC301 controller also available for use with this Space Heater for cool air circulation and thermostatic heating control (controller not supplied)
Air delivery (litres/second): 76
Weight: 5kg
1 year guarantee
BEAB approved
CE approved

Please click here to download the PDF document on this wall mounted fan heater

Xpelair PX12 Standard 300mm (12") Commercial Ceiling Axial Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91298AW Xpelair's PX range brings even better flexibility into the design of commercial and larger domestic ventilation systems. These fans are ideal for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks. These fans can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether it's smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows for the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid, due to the concealed fixing points provided.

High performance extract only axial flow ventilation unit
2 speed
Choice of optional controllers
Operated by remote On/Off switch (not supplied)
Suitable for installation at any angle in ceilings, voids and wall panels of any thickness
Totally enclosed motor
Sealed for life maintenance free bearings, suitable for running at any angle
Built in silent action electrothermal shutter cassette
Ultra slim high gloss ABS fascia with integral safety finger guard
Extract performance (FID litres/second): 1712
Ducting size: 315mm
Weight: 7.9kg
Hole size: 434x434mm
Spigot size: 315mm
2 year guarantee

Please click here to download the PDF document on this fan

Xpelair PX9 Standard 225mm (9") Commercial Ceiling Axial Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91299AW Xpelair's PX range brings even better flexibility into the design of commercial and larger domestic ventilation systems. These fans are ideal for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks. These fans can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether it's smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows for the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid, due to the concealed fixing points provided.

High performance extract only axial flow ventilation unit
2 speed
Choice of optional controllers
Operated by remote On/Off switch (not supplied)
Suitable for installation at any angle in ceilings, voids and wall panels of any thickness
Totally enclosed motor
Sealed for life maintenance free bearings, suitable for running at any angle
Built in silent action electrothermal shutter cassette
Ultra slim high gloss ABS fascia with integral safety finger guard
Extract performance (FID litres/second): 790
Ducting size: 250mm
Weight: 4.7kg
Hole size: 375x345mm
Spigot size: 250mm
2 year guarantee

Please click here to download the PDF document on this fan

Xpelair PX6 Standard 150mm (6") Commercial Ceiling Axial Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91300AW Xpelair's PX range brings even better flexibility into the design of commercial and larger domestic ventilation systems. These fans are ideal for ceiling and panel applications in kitchens, restaurants, pubs, offices, schools, shops and kiosks. These fans can be installed at any angle in ceilings, voids and wall panels of any thickness. The ceiling hugging, low profile white fascia is styled to blend into any ceiling type, whether it's smooth, tiled or textured. For safety, a finger guard is integrated into the ultra slim high gloss ABS fascia. An integral spigot allows for the attachment of flexible ducting, such as XFlex. Installation in ceilings and wall panels is rapid, due to the concealed fixing points provided.

High performance extract only axial flow ventilation unit
1 speed
Operated by remote On/Off switch (not supplied)
Suitable for installation at any angle in ceilings, voids and wall panels of any thickness
Totally enclosed motor
Sealed for life maintenance free bearings, suitable for running at any angle
Built in silent action electrothermal shutter cassette
Ultra slim high gloss ABS fascia with integral safety finger guard
Extract performance (FID litres/second): 246
Ducting size: 200mm
Weight: 2.8kg
Hole size: 268x245mm
Spigot size: 200mm
2 year guarantee

Please click here to download the PDF document on this fan

Xpelair WAC6R Group Fan Reversing Controller For Sweep Fans

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 21878AW

Variable speed two slide switches providing On/Off operation
Complete with fan running indicator light and choice of winter/summer upwards or downwards airflow

Xpelair WAC6 Group Fan Controller For Sweep Fans

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 21853AW

Provides On/Off and variable speed control for up to 6 of these SweepFans
Fan running indicator light
Surface mounted

Xpelair WAC1 Single SweepFan Fan Controller

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 21852AW

Two slide switches providing On/Off operation
5 speed settings
Complete with transformer controller for quiet operation
Fan running indicator light

Xpelair AWC ThermoMiser Automatic Temperature Sensor For Sweep Fans

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 21857AW

De-Stratification temperature controller supplied with two thermo sensors at high / low level monitoring between preset minimum and maximum valves
For the simultaneous speed control of between 1 - 10 SweepFan units
Three slide switches provide On/Off operation and upwards or downwards rotation; and manual override
Complete with fan running light

Xpelair NWAN60 Ceiling Sweep Fan With 1500mm Diameter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90412AW This range of commercial ceiling sweep fans was originally designed to provide a cool flow of air during warm periods. Xpelair SweepFans are also a popular choice during the winter months, where their use as heat destratification units can help to reduce heating costs. These commercial ceiling sweep fans are designed for use in public buildings, shops, theme pubs, restaurants, village halls, churches, hospitals, schools, farm buildings, factories, warehouses; and other commercial buildings. These SweepFans are designed for worldwide use, including hot and humid conditions. The units are rated for continuous operation in commercial applications at temperatures up to 40 degrees C; and are suitable for upwards or downwards airflow. In summer the atmosphere can become stifling hot, and these fans can provide immediate relief by quietly delivering a continuous cooling breeze over a wide area. To maximise this benefit it is always a good idea to introduce fresh area into the area. In winter stratification will naturally occur in a room as hot air rises to ceiling level (or the apex of the roof) and cooler air will sink. When this happens Xpelair SweepFans will effectively destratify the hot air which gathers at ceiling height by pushing it downwards to mix with cooler air nearer to ground level, thus creating a more uniform temperature profile from ground level to ceiling level. This results in reduced heating costs as all of the hot air does not gather at ceiling height, and thermal losses are reduced. The units should be set for downward airflow at low speed for optimum effect. The optional Xpelair ThermoMiser sensor control system can automatically compare high and low level temperatures and ensure that the fans are operated to maximise energy efficiency. The controller should be situated where the ambient temperature is less than 35 degrees C, with the two sensors fitted at high and low level and connected using the cables supplies. In the summer the control knob can be used to manually override the sensors. For no-frills speed SweepFan controllers are available for the control of a single fan or groups of up to 6 fans.

Steel blades
Sweep diameter: 1500mm
Remote switch: (not supplied)
Reversible operation
Maximum speed: (RMP): 260
Air delivery (litres/second): 3878
Power rating: 65w
Weight: 6.5kg
Overall drop options: 375/750mm
2 year guarantee

Please click here to download the PDF document on this Sweep Fan

Xpelair NWAN56 Ceiling Sweep Fan With 1400mm Diameter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90411AW This range of commercial ceiling sweep fans was originally designed to provide a cool flow of air during warm periods. Xpelair SweepFans are also a popular choice during the winter months, where their use as heat destratification units can help to reduce heating costs. These commercial ceiling sweep fans are designed for use in public buildings, shops, theme pubs, restaurants, village halls, churches, hospitals, schools, farm buildings, factories, warehouses; and other commercial buildings. These SweepFans are designed for worldwide use, including hot and humid conditions. The units are rated for continuous operation in commercial applications at temperatures up to 40 degrees C; and are suitable for upwards or downwards airflow. In summer the atmosphere can become stifling hot, and these fans can provide immediate relief by quietly delivering a continuous cooling breeze over a wide area. To maximise this benefit it is always a good idea to introduce fresh area into the area. In winter stratification will naturally occur in a room as hot air rises to ceiling level (or the apex of the roof) and cooler air will sink. When this happens Xpelair SweepFans will effectively destratify the hot air which gathers at ceiling height by pushing it downwards to mix with cooler air nearer to ground level, thus creating a more uniform temperature profile from ground level to ceiling level. This results in reduced heating costs as all of the hot air does not gather at ceiling height, and thermal losses are reduced. The units should be set for downward airflow at low speed for optimum effect. The optional Xpelair ThermoMiser sensor control system can automatically compare high and low level temperatures and ensure that the fans are operated to maximise energy efficiency. The controller should be situated where the ambient temperature is less than 35 degrees C, with the two sensors fitted at high and low level and connected using the cables supplies. In the summer the control knob can be used to manually override the sensors. For no-frills speed SweepFan controllers are available for the control of a single fan or groups of up to 6 fans.

Steel blades
Sweep diameter: 1400mm
Remote switch: (not supplied)
Reversible operation
Maximum speed: (RMP): 280
Air delivery (litres/second): 3465
Power rating: 65w
Weight: 6.5kg
Overall drop options: 375/750mm
2 year guarantee

Please click here to download the PDF document on this Sweep Fan

Xpelair NWAN48 Ceiling Sweep Fan With 1200mm Diameter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90410AW This range of commercial ceiling sweep fans was originally designed to provide a cool flow of air during warm periods. Xpelair SweepFans are also a popular choice during the winter months, where their use as heat destratification units can help to reduce heating costs. These commercial ceiling sweep fans are designed for use in public buildings, shops, theme pubs, restaurants, village halls, churches, hospitals, schools, farm buildings, factories, warehouses; and other commercial buildings. These SweepFans are designed for worldwide use, including hot and humid conditions. The units are rated for continuous operation in commercial applications at temperatures up to 40 degrees C; and are suitable for upwards or downwards airflow. In summer the atmosphere can become stifling hot, and these fans can provide immediate relief by quietly delivering a continuous cooling breeze over a wide area. To maximise this benefit it is always a good idea to introduce fresh area into the area. In winter stratification will naturally occur in a room as hot air rises to ceiling level (or the apex of the roof) and cooler air will sink. When this happens Xpelair SweepFans will effectively destratify the hot air which gathers at ceiling height by pushing it downwards to mix with cooler air nearer to ground level, thus creating a more uniform temperature profile from ground level to ceiling level. This results in reduced heating costs as all of the hot air does not gather at ceiling height, and thermal losses are reduced. The units should be set for downward airflow at low speed for optimum effect. The optional Xpelair ThermoMiser sensor control system can automatically compare high and low level temperatures and ensure that the fans are operated to maximise energy efficiency. The controller should be situated where the ambient temperature is less than 35 degrees C, with the two sensors fitted at high and low level and connected using the cables supplies. In the summer the control knob can be used to manually override the sensors. For no-frills speed SweepFan controllers are available for the control of a single fan or groups of up to 6 fans.

Steel blades
Sweep diameter: 1200mm
Remote switch: (not supplied)
Reversible operation
Maximum speed: (RMP): 310
Air delivery (litres/second): 3025
Power rating: 65w
Weight: 6.5kg
Overall drop options: 375/750mm
2 year guarantee

Please click here to download the PDF document on this Sweep Fan

Xpelair NWAN36 Ceiling Sweep Fan With 900mm Diameter

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90409AW This range of commercial ceiling sweep fans was originally designed to provide a cool flow of air during warm periods. Xpelair SweepFans are also a popular choice during the winter months, where their use as heat destratification units can help to reduce heating costs. These commercial ceiling sweep fans are designed for use in public buildings, shops, theme pubs, restaurants, village halls, churches, hospitals, schools, farm buildings, factories, warehouses; and other commercial buildings. These SweepFans are designed for worldwide use, including hot and humid conditions. The units are rated for continuous operation in commercial applications at temperatures up to 40 degrees C; and are suitable for upwards or downwards airflow. In summer the atmosphere can become stifling hot, and these fans can provide immediate relief by quietly delivering a continuous cooling breeze over a wide area. To maximise this benefit it is always a good idea to introduce fresh area into the area. In winter stratification will naturally occur in a room as hot air rises to ceiling level (or the apex of the roof) and cooler air will sink. When this happens Xpelair SweepFans will effectively destratify the hot air which gathers at ceiling height by pushing it downwards to mix with cooler air nearer to ground level, thus creating a more uniform temperature profile from ground level to ceiling level. This results in reduced heating costs as all of the hot air does not gather at ceiling height, and thermal losses are reduced. The units should be set for downward airflow at low speed for optimum effect. The optional Xpelair ThermoMiser sensor control system can automatically compare high and low level temperatures and ensure that the fans are operated to maximise energy efficiency. The controller should be situated where the ambient temperature is less than 35 degrees C, with the two sensors fitted at high and low level and connected using the cables supplies. In the summer the control knob can be used to manually override the sensors. For no-frills speed SweepFan controllers are available for the control of a single fan or groups of up to 6 fans.

Steel blades
Sweep diameter: 900mm
Remote switch: (not supplied)
Reversible operation
Maximum speed: (RMP): 350
Air delivery (litres/second): 2434
Power rating: 50w
Weight: 6.5kg
Overall drop options: 375/750mm
2 year guarantee

Please click here to download the PDF document on this Sweep Fan

Xpelair RX12 Commercial Roof Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90425AW High performance axial extract roof fans for ventilating through glazed and solid roofs with UV stabilised roof cowl assembly, which provides weather protection at all angles.

High performance intake/extract axial flow ventilation unit
Choice of optional controllers
Tamper proof internal connection safety plug and socket
Operated by remote On/Off switch (not supplied)
1 speed
Extract only
324mm hole diameter
Supply voltage: 220-240v 50Hz
Easy to clean high glosss ABS housing
Trickle vent option for background ventilation when fan is off
Built in electrothermal shutter cassette
25mm maximum wall thickness
Extract performance FID litres/second: 306
Weight: 7.9kg
Power rating: 87w
3 year guarantee

Please click here to download the PDF document on this fan

Xpelair RX9 Commercial Roof Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90424AW High performance axial extract roof fans for ventilating through glazed and solid roofs with UV stabilised roof cowl assembly, which provides weather protection at all angles.

High performance intake/extract axial flow ventilation unit
Choice of optional controllers
Tamper proof internal connection safety plug and socket
Operated by remote On/Off switch (not supplied)
1 speed
Extract only
257mm hole diameter
Supply voltage: 220-240v 50Hz
Easy to clean high glosss ABS housing
Trickle vent option for background ventilation when fan is off
Built in electrothermal shutter cassette
25mm maximum wall thickness
Extract performance FID litres/second: 142
Weight: 4.5kg
Power rating: 41w
3 year guarantee

Please click here to download the PDF document on this fan

Xpelair RX6 Commercial Roof Fan

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 90818AW High performance axial extract roof fans for ventilating through glazed and solid roofs with UV stabilised roof cowl assembly, which provides weather protection at all angles.

Operated by remote On/Off switch (not supplied)
1 speed
Extract only
184mm hole diameter
Supply voltage: 220-240v 50Hz
Easy to clean high glosss ABS housing
Trickle vent option for background ventilation when fan is off
Built in electrothermal shutter cassette
25mm maximum wall thickness
Extract performance FID litres/second: 57
Weight: 3.8kg
Power rating: 35w
3 year guarantee

Please click here to download the PDF document on this fan

Xpelair Premier CF40RSTD Condensation Control Fan With Remote Switch, Humidistat And Timer

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91088AW Xpelair CF40RSTD Condensation Control Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Condensation control with humidistat, timer & remote switch
Automatic operation through integral humidity sensor
MOS remote switch supplied with fan, which selects high or low speed and can switch the unit Off (or to tricklevent)
Timer is usually connected to a lighting circuit
Built-in run on period after the light has been switched Off , which is user adjustable from 30 seconds to 20 minutes
Supplied with external wall grille

Please note that for Kitchen installations, a grease filter (PDXGF4) is recommended. Part No. 91145AA Please click here to download the PDF document on this fan

Xpelair Premier CF40TD Condensation Control Fan With Pullcord, Humidistat & Timer

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91087AW Xpelair CF40TD Condensation Control Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Condensation control with humidistat, pullcord and timer
Automatic operation through integral humidity sensor
Pullcord selects, High, Low, Off, or Trickle
Timer is usually connected to a lighting circuit
Built-in run on period after the light has been switched Off , which is user adjustable from 30 seconds to 20 minutes
"QuickVisit" delay feature stops the fan from running should the light be switched On/Off again within 2 minutes
Supplied with external wall grille

Please click here to download the PDF document on this fan

Xpelair Premier CF40 Condensation Control Fan With Pullcord And Humidistat

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91086AW Xpelair CF40 Condensation Control Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Condensation control with humidistat and pullcord
Automatic operation through integral humidity sensor
Pullcord selects, High, Low, Off, or Trickle

Please click here to download the PDF document on this fan

Xpelair DX400RS Premier Centrifugal Extract Fan With Remote Switch

Wed, 08 Sep 2010 01:44:17 +0000

Part No: 91085AW Xpelair DX400RS Centrifugal Extract Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Two speed centrifugal fan
Remote switch (Supplied separately)
Can be surface or flush mounted in ceilings or walls
Pre-selectable speed to suit application
Supplied complete with a back draft shutter and outlet grille
IPX5 rated
BEAB approved
Suitable for 220 - 240V 50Hz mains operation
Conforms to building regulations

Please click here to download the PDF document on this fan

Xpelair DX400PC Premier Centrifugal Extract Fan With Pullcord

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 91100AW Xpelair DX400PC Centrifugal Extract Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Three speed centrifugal fan
Complete with pullcord
Can be surface or flush mounted in ceilings or walls
Pre-selectable speed to suit application
Supplied complete with a back draft shutter and outlet grille
IPX5 rated
BEAB approved
Suitable for 220 - 240V 50Hz mains operation
Conforms to building regulations

Please click here to download the PDF document on this fan

Xpelair DX400T Premier Centrifugal Extract Fan With Timer

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 91084AW Xpelair DX400T Centrifugal Extract Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Two speed centrifugal fan
Complete with timer
Built in run-on period after the lights have been switched Off, adjustable from 30 seconds to 20 minutes
Can be surface or flush mounted in ceilings or walls
Pre-selectable speed to suit application
Supplied complete with a back draft shutter and outlet grille
IPX5 rated
BEAB approved
Suitable for 220 - 240V 50Hz mains operation
Conforms to building regulations

Please click here to download the PDF document on this fan

Xpelair DX400 Premier Centrifugal Extract Fan

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 91083AW Xpelair DX400 Centrifugal Extract Fans are ideally suited for use in the following areas; kitchens, utilities, larger bathrooms and toilets; and also individual offices.

Two speed centrifugal fan
Can be surface or flush mounted in ceilings or walls
Pre-selectable speed to suit application
Supplied complete with a back draft shutter and outlet grille
IPX5 rated
BEAB approved
Suitable for 220 - 240V 50Hz mains operation
Conforms to building regulations

Please click here to download the PDF document on this fan

Xpelair DT20B Time Controller

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 21850AW

Usually connected to the lighting circuit
Fan switches On with the light
Provides continued ventilation run-on period after the light has been switched off
user adjustable up to 20 minutes
Surface or recess mounting
White finish
Supply Voltage: 220 - 240V 50Hz
Dimensions: 100 x 86mm
Used with the following fans: Premier DX180, DX200, DX400, DX100, XIL, CMF, CX10, LoVolt DX100, GX6, GX9, GX12, WX6, WX9, WX12, PX6, PX9, PX12, RX6, RX9; and the RX12

Xpelair XRH Remote Humidistat

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 21856AW

Stand alone humidistat switches On when RH rises to preset level and Off when it declines
Fan operation indicator light
Pullcord operated override switch
Surface or recess mounting
Dimensions: 160mm x 86mm
White finish
Supply Voltage: 220 - 240V 50Hz
Used with the following fans: Premier DX180, DX200, DX400, DX100, XIL, CMF, CX10, GX6, GX9, GX12, WX6, WX9, WX12, Px6, PX9, PX12, RX6, RX9; and the RX12

Xpelair TBS Timer And Boost Switch

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 90202AW

Provides switching between humidity control/manual operation
Manual operation at high/low speed
Surface or recess mounting
Dimensions: 85mm x 85mm
Used with the following fans: GX6 and GXC6HT2

Xpelair MOS Manual Override Switch

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 90199AW

Switch 1: High/Low Speed
Switch 2: On/Off (Or Off/Trickelvent according to fan option selected)
Surface or recess mounting
Dimensions: 85mm x 85mm
Used with the following fans: Premier DX200 and Premier DX400; DX400RS in conjunction with XRH Remote humidistat

Xpelair COS Change Over Switch

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 90108AW

Used to select between high and low speed operation
Suitable for surface and recess mounting
Dimensions: 85mm x 85mm
Used with the following fans: DX400, DX400T and the DX400RS

Xpelair LVH Remote Humidistat Fan Controller

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 21863AW Xpelair Remote Humidistat Fan Controller For The LV100 Range Of Fans.

A 12V SELV LoVolt humidistat
Automatically switches On when the relative humidity reaches an adjustable pre set point and then switches Off when the humidity drops
Pullcord override switch
Fan indicator light
Surface or recess mounting
Suitable for ambient temperatures up to 40 degrees C
Dimensions: 160mm x 86mm
Supply Voltage: 12 Volts SELV, used with the following fans: Premier LoVolt DX200, LoVolt CF20 and LoVolt DX100

Vent Axia 432505B Vent-A-Light Inline Shower Fan And Light Kit With Timer

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 432505B Vent Axia Vent-A-Light Inline Shower Fan And Light Kit With Timer, Supplied Complete With 3 Metres Of Ducting, External Grille, Light Transformer And Light Assmebly.

Supplied with chrome and white bezels
Complete With Timer (adjustable from 5 - 30 minutes)
IP44 rated fan
20w dichroic halogen lamp included
IP57 rated light assembly
Extract performance: 108m3/h (30 litres/second)

Vent Axia 432504B Vent-A-Light Inline Shower Fan And Light Kit

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 432504B Vent Axia Vent-A-Light Inline Shower Fan And Light Kit, Supplied Complete With 3 Metres Of Ducting, External Grille, Light Transformer And Light Assmebly.

Supplied with chrome and white bezels
IP44 rated fan
20w dichroic halogen lamp included
IP57 rated light assembly
Extract performance: 108m3/h (30 litres/second)

Powerbreaker J72G-C RCD Plug In Grey

Wed, 08 Sep 2010 01:44:18 +0000

Part No: J72G-C Powerbreaker 30mA Electrically Latched RCD Plug In Grey.

Conforms to BS7071 and BS1363
Single button for test/reset
Electrically Latched
Mechanical trip indicator
Rated Voltage: 230v AC 50Hz
Maximum Operating Current: 13 Amp (3 Amp inductive)

Powerbreaker J02-C RCD Adaptor And Plug In White

Wed, 08 Sep 2010 01:44:18 +0000

Part No: JO2-C Powerbreaker 30mA Electrically Latched RCD Adaptor And Plug In White. The Powerbreaker J02-C Safety RCD Adaptor And Plug Is Ideal For Use With All Major Electrical Household Appliances, Including Power Tools.

Conforms to BS7071 and BS1363
Single button for test/reset
Electrically Latched
Mechanical trip indicator
Rated Voltage: 230v AC 50Hz
Maximum Operating Current: 13 Amp (3 Amp inductive)

Powerbreaker H92MP-C Metalclad RCD Fused Spur

Wed, 08 Sep 2010 01:44:18 +0000

Part No: H92MP-C Powerbreaker Metalclad 30mA Mechanically Latched RCD Fused Spur. These RCD Fused Spurs are suitable for use with all electrical appliances in areas where water hazards are present.

Immediate tripping of the RCD Fused Spur as soon as earth leakage is detected
Twin earth terminals
Integral cord outlet and cable clamp
Supplied complete with back box
Fuse holder can be locked out for safety
Mechanically latched (does not need to be reset after power loss)
Conforms to BS5733 and BS7288
Trip indicator light
Rated Voltage: 230v AC 50Hz
Maximum Operating Current: 13 Amp (3 Amp inductive)
Fits a standard 25mm pattress (back box)
Dimensions (Including Back Box): 84mm x 84mm x 60mm

Powerbreaker H92WP-C 13 Amp, 30mA White RCD Fused Spur Unit

Wed, 08 Sep 2010 01:44:18 +0000

Part No: H92WP-C Powerbreaker White 13 Amp, 30mA Mechanically Latched RCD Fused Spur. These RCD Fused Spurs are suitable for use with all electrical appliances in areas where water hazards are present.

Immediate tripping of the RCD Fused Spur as soon as earth leakage is detected
Twin earth terminals
Integral cord outlet and cable clamp
Fuse holder can be locked out for safety
Mechanically latched (does not need to be reset after power loss)
Conforms to BS5733 and BS7288
Trip indicator light
Rated Voltage: 230v AC 50Hz
Maximum Operating Current: 13 Amp (3 Amp inductive)
Fits a standard 25mm pattress (back box)
Dimensions: 85mm x 85mm x 38mm

550703 RGB FlexLED Roll 5M 24V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550703 5 Metre Roll Of 24V DC RGB FlexLED, Flexible LED Strip. 240 LED's. 48w per strip. Length: 500cm Width: 1.5cm Height: 0.2cm Weight: 0.13kg Strip is separable every 12.5cm. Minimum bending radius: 1.3cm Connection length: 30cm Please note that this RGB FlexLED is supplied without power unit. Please see the following power units; the 470521, 470503, 470531; and the 470600. All of the above, power supplies can be found under the LED Drivers section of this website. Double sided 9mm adhesive tape is also available for fitting this LED Strip. Please see product 220000.

550603 RGB FlexLED Roll 5M 12V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550603 5 Metre Roll Of 12V DC RGB FlexLED, With Adhesive Tape On The Rear Side. 150 3in1 RGB LED's. 25w per strip. Length: 500cm Width: 1cm Height: 0.25cm Weight: 0.1kg Strip is separable every 10cm. Minimum bending radius: 2cm Connection length: 50cm Please note that this RGB FlexLED is supplied without power unit. Please see the following power units; the 470503, 470508, 470531; and the 470509 converter. Please also note that by an output greater than 25w, a new feed-in must be created.

550411 LED Strip Feed-In For RGB FlexLED Roll 3M 24V DC

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550411 LED Strip Feed In For The 3 Metre Roll Of RGB FlexLED. Operating Load: 50w max Weight: 0.01kg Length: 50cm

550433 RGB FlexLED Roll 3M 24V DC

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550433 3 Metre Roll Of 24V DC RGB FlexLED. 3in1 RGB LED (120 LED's) 34W per strip Length: 300cm Width: 1.2cm Height: 0.26cm Weight: 0.09kg This RGB LED Strip is separable every 12.5cm. Minimum bending radius: 1.3cm. Please note that this RGB FlexLED Strip is supplied less controller. Suitable controllers are the 470521, 470503, 470531, and the 470509 (converter). Connection and joining of this Flexible LED Strip is carried out via soldering. Please also note that by an output greater than 50w, a new feed-in must be created. (See product 550411). Double sided adhesive tape is also available for this product. See product 220000.

470601 Radio Transmitter For Easy Lim Pro

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470601 Easy Lim Pro RF Transmitter. Radio remote control for the Easy Lim Pro RF Master Controller (470600/470610). Transmitter frequency can be adjusted via dip switches. Battery: 1 x 12v LRV08 (supplied less battery). Length: 8.5cm Width: 3.7cm Height: 1.7cm Weight: 0.04kg

470509 PMW Convertor 3 Channel 12V / 24V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470509 PMW 3 Channel Convertor 12V/24V, 1-10V. Length: 17cm Width: 4cm Height: 3cm Weight: 0.1kg For controlling of 12v DC and 24v DC RGB Strips. Input: 3 x 1-10v Output: 3 x 1.4A Maximum power output per channel 12v dc - 16.6w 24v dc - 33.3w

470600 Easy LIM Pro RF Master Controller Radio 12V / 24V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470600 Easy LIM Pro RF Master Controller 12V/24V.

17 fixed programs
Pause function
Fade speed and brightness, which are adjustable
On-off function
Memory function by mains disconnection
Output 3 x 1.38A
Receiver frequency via remote control operation, which can be adjusted via dip switches

Power output watt per channel 12v = 16.5w 24v = 33w Length: 16.6cm Width: 3.9cm Height: 3.3cm Weight: 0.8kg Please note that this is optionally controllable via remote control (product code 470601).

220631 Mounting Track For RGB LED Strips

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 220631 1 Metre Mounting Track For RGB LED Strips. Material: Plastic Length: 100cm Height: 2cm Width: 0.9cm Weight: 0.057kg

550322 Flex Connector For RGB LED Strips

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550322 Flex Connector For RGB LED Strips, 4 Core / 10 Pieces. Operating Load: 50w max Length: 5cm

550321 Connection Cable For RGB LED Strips

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550321 Connection Cable For RGB LED Strips. 4 core / 2 pieces Operating Load: 50w max Length: 50cm

550320 RGB LED Strip 3W

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550320 25cm Length Of LED Strip 3in1 RGB, 10 LED, DC 24V. Bulb: 10 x 3 in 1 RGB LED's Voltage: 24v DC Length: 25cm Width: 1.6cm Height: 0.62cm Separable every 12.5cm Weight: 0.02kg Please note that this fLED strip is supplied less power supply. The following power supplies are available for this product; the 470521, the 470503, the 470600; and the 470531. There is also the 470509, 3 Channel Converter available for use with this RGB LED Strip. Please note that by an output greater than 50w, a new feed-in must be created. The following accessories are also available for use with this LED RGB Strip; 550321 (Connection Cable), 550322 (Flex Connector), 220631 (Mounting Track); and 550191 (Fastening Clips).

White Die-Cast GU10 Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

White Die-Cast GU10 Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

Satin Nickel Die-Cast GU10 Adjustable Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel Die-Cast GU10 Adjustable Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

White Die-Cast IP65 GU10 Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

White Die-Cast IP65 GU10 Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

Polished Chrome Die-Cast GU10 Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome Die-Cast GU10 Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

Polished Chrome Die-Cast GU10 Adjustable Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome Die-Cast GU10 Adjustable Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

White Die-Cast GU10 Adjustable Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

White Die-Cast GU10 Adjustable Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

Satin Nickel Die-Cast IP65 GU10 Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel Die-Cast IP65 GU10 Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

Polished Chrome Die-Cast IP65 GU10 Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome Die-Cast IP65 GU10 Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

Satin Nickel Die-Cast GU10 Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel Die-Cast GU10 Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * All mains fittings have earth terminal. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

Polished Chrome Low Voltage Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome Low Voltage Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

White Low Voltage Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

White Low Voltage Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

Satin Nickel Low Voltage Adjustable Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel Low Voltage Adjustable Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

Satin Nickel Low Voltage Fixed Fire Rated Downlighter

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel Low Voltage Fixed Fire Rated Downlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 75mm Depth: 132mm Width: 92mm Max Wattage: 50w

White Low Voltage Adjustable Fire Rated Downlight

Wed, 08 Sep 2010 01:44:18 +0000

White Low Voltage Adjustable Fire Rated Downlighter. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

Polished Chrome Low Voltage Adjustable Fire Rated Downlight

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome Low Voltage Adjustable Fire Rated Downlighter. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 90mm Depth: 132mm Width: 92mm Max Wattage: 50w

Satin Nickel IP65 Low Voltage Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

Satin Nickel IP65 Low Voltage Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

Polished Chrome IP65 Low Voltage Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

Polished Chrome IP65 Low Voltage Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

White Die-Cast IP65 Low Voltage Fire Rated Showerlight

Wed, 08 Sep 2010 01:44:18 +0000

White Die-Cast IP65 Low Voltage Fire Rated Showerlight. * Fire Tested and assessed for up to 90 minutes in accordance with the methodologies of BS 476: Parts 21 and 23: 1987. * Complies with the requirements of Hospital Regulation HTM81. * In the event of a fire, the intumescent material completely seals the downlighter. * Uses both types of lamp dichroic and aluminium, 50 watt maximum. * Maintains acoustic barrier. * Very easy to install. * Strong springs for better ceiling fit. * Springs are recessed in body for neatness. * Ventilation holes in the top for cooler operation. * The connector block incorporates a cable grip to allow for loop in use. * The downlighters have been assessed for their contribution to the fire performance of various types of fire rated ceiling / floor construction and this test has given 90 minutes rating. All fire resistance testing has been project managed and witnessed by the UK's leading independant fire consultancy, International Fire Consultants Ltd, and carried out as a UKAS accredited fire test laboratory, Chiltern Fire. Hole Cut Out: 70mm Depth: 132mm Width: 87mm Max Wattage: 50w

213321 End Cap (Left And Right) For LED Wall Profile

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 213321 Silver Grey End Caps For LED Wall Profile, 2 Pieces, Left And Right Hand End Caps. Material: Plastic Length: 3cm Width: 2.3cm

213320 Mounting Holder For LED Wall Profile

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 213320 For Snap In Mounting Of The LED Aluminium Profile (213312). Supplied as 3 pieces, complete with screws and dowels. Material: Aluminium Length: 4cm Width: 0.8cm Height: 1.1cm

213312 LED Wall Profile

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 213312 Aluminium Profile For The Mounting Of LED Strips To Create An Indirect Illumination. Length: 200cm Width: 2.3cm Height: 3cm

550701 FlexLED Roll 5M 24V In White

Wed, 08 Sep 2010 01:44:18 +0000

Part Mo: 550701 5 Metre Roll Of FlexLED, Flexible LED Strip In White, With 300 LED's. Voltage: 24V DC 25w Per strip Length: 500cm Width: 1.0cm Height: 0.3cm Strip separable every 10cm. Minimum bending radius: 1.3cm Flexible LED Strip can be fastened using double sided adhesive tape. See product 220000. Please see The LED Drivers section on this website, to find a suitable power unit. Please also see product 550410 (feed-in for FlexLED). This Flexible LED Strip is also available in warm white. Please specify below the colour of FlexLED that you require

550601 FlexLED Roll 5M 12V In White

Wed, 08 Sep 2010 01:44:18 +0000

Part Mo: 550601 5 Metre Roll Of FlexLED, Flexible LED Strip In White, With 300 LED's. Voltage: 12V DC 24w Per strip Length: 500cm Width: 0.8cm Height: 0.25cm Strip separable every 5cm. Minimum bending radius: 2cm Rear side of this FlexLED is equipped with tape. Operate only using a direct current power unit. (Please see product 470508, 12v 60w LED Driver under the LED Drivers section on this website). Please note that a maximum of 2 strips per power supply in parallel connection. By an output greater than 25w, a new feed-in must be made. This FlexLED is not suitable for use with the PVC tube (product code 211200). This Flexible LED Strip is also available in other colours. Please specify below the colour of FlexLED that you require

550410 LED Strip Feed-In For FlexLED Roll 3M 12/24V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550410 Feed In For Single Colour LED Flexible Strip. Operating Load: 24v - 50w max, 12v - 25w max Length: 50cm Please note that when you are using the PVC tube the feed-in must be outside of the tube.

550431 FlexLED Roll 3M 120 LED 24V In White

Wed, 08 Sep 2010 01:44:18 +0000

Part Mo: 550431 3 Metre Roll Of FlexLED, Flexible LED Strip In White, With 120 LED's. Voltage: 24V DC 10w Per strip Length: 300cm Width: 0.7cm Height: 0.26cm Strip separable every 15cm. Minimum bending radius: 1.3cm Please note that the connection of the Flexible LED Strips is carried out via soldering. Operate only using a suitable 24v LED Driver. (Please see the LED Driver section on this website to find suitable power supplies). By an output greater than 50w, a new feed-in must be made. This FlexLED can be used with the PVC tube (product code 211200). This Flexible LED Strip is also available in warm white. Please specify below the colour of FlexLED that you require

550441 FlexLED Roll 3M 120 LED 12V In White

Wed, 08 Sep 2010 01:44:18 +0000

Part Mo: 550441 3 Metre Roll Of FlexLED, Flexible LED Strip In White, With 120 LED's. Voltage: 12V AC 12w Per strip Length: 300cm Width: 0.7cm Height: 0.3cm Strip separable every 15cm. Minimum bending radius: 1.3cm Please note that the connection of the Flexible LED Strips is carried out via soldering. Operate only using a torodial transformer. (Please see the Transformer section on this website to find suitable transformer). By an output greater than 25w, a new feed-in must be made. This FlexLED can be used with the PVC tube (product code 211200). This Flexible LED Strip is also available in warm white. Please specify below the colour of FlexLED that you require

212090 Fastening Clips For Acrylic Tube (Pack Of 100)

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 212090 Pack Of 100 Tube Light Fastening Clips For 10x10mm And 11mm Round. Material: Polycarbonate Weight: 0.2kg

211200 PVC Tube 10x10mm Clear

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 211200 Material: PVC Transparent PVC Tube For The Incorporation Of LED Strips With 0.7cm Width. Only available in 2 metre lengths. Width: 1cm Height: 1cm Length: 2 metres Weight: 0.04kg

213302 Stairnose Profile In Silver Grey Anodized

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 213302 2 Metre Stairnose Profile For The Incorporation Of LED Strips In PVC Tube (Part No: 211200). Only available in 2 metre lengths. Material: Aluminium

550231 LED Multiflex Strip 60CM, DC 12V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550231 12V DC 4W Multiflex, Flexible LED Strip In White. 4W Per Strip Length: 61cm Width: 0.7cm Height: 0.26cm Minimum Bending Radius: 1.3cm LED Strip separable every 7.6cm Weight: 0.022kg Without connection lead. Please note that connection and the joining of the flexible LED Strips is done through soldering. Please also note that by an output greater than 50w a new feed-in must be made. Double sided adhesive tape is also available for this flexible LED Strip. See product 220000. Please also see under the LED Drivers section on this website to find suitable control drivers for this LED Strip. This Flexible LED Strip is also available in different colours. Please specify below the colour LED Strip that you require

470508 LED Power Unit 60W, 12V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470508 12V 60W LED Driver. Voltage: 230v Length: 18.2cm Width: 8.8cm Height: 3.5cm Weight: 0.62kg

470507 LED Power Unit 12W, 12V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470507 12V 12W LED Driver. Voltage: 230v Length: 8.5cm Width: 4cm Height: 2.3cm Weight: 0.06kg

550650 Feed-In For LED Strip 48CM 30 LED

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550650 Feed In For Lead Strip, 2 Pieces, With Female Plug. Operating Load: 25w max Length: 50cm Weight: 0.010kg

550641 LED Strip 48CM 30 LED, DC 12V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550641 12V DC LED Strip In White With 30 LED's, 2.3W Total. Separable evry 4.7cm Length: 48.5cm Width: 0.8cm Height: 0.6cm Max Load: 2.3 watts Voltage: 12 volts Weight: 0.02kg Please note that by an output greater than 25w, a new feed-in must be made. See product 550650, which is the feed-in lead for this LED Strip. After separation a through wiring is only possible via soldering. Please see the LED Drivers section on this website for suitable control drivers. See products 470507 (12v 12w driver) and 470508 (12v 60w driver). This LED Strip is also available in other colours. Please specify below the colour LED Strip that you require

550191 Fastening Clips (Pack Of 100)

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550191 Fastening Clips For LED Strips. Supplied in a pack of 100.

550193 Direct Connection Plug For LED Strips (Pack Of 10)

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550193 Direct Connection Plug For Rigid LED Strips. 10 Pieces supplied in pack. Operating Load: 50w max

550190 Connector Plug For LED Strips (Pack Of 10)

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550190 10 Piece Pack Of Connector Plugs For LED Strip. Operating Load: 50w max Length: 10cm Weight: 0.015kg

550192 Connection Cable For LED Strips

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550192 2 Piece Connection Cable For LED Strips. Operating Load: 50w max Length: 50cm Weight: 0.011kg

550181 LED Strips, 30.5CM Long

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 550181 24V DC LED Strip In White, 30.5CM Long With 24 LED's. Length: 30.5cm Width: 0.7cm Height: 0.7cm Voltage: 24 volts Weight: 0.012kg Maximum Load: 2 watts Please note that this LED Strip is extendable and also separable every 7.6cm. By an output of more than 50w a new feed-in must be created. This LED Strip is supplied less power supply. Please see the LED Drivers section on this website for suitable power supplies. See the following accessories for this product; 550192 (connection cable), 550190 (connector plug), 550193 (direct connection plug) and 550191 (fastening clips). This LED Strip is also available in different colours. Please specify below the colour that you require.

470540 LED Power Unit 100W, 24V, Dimmable

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470540 24V 100W Dimmable LED Driver, 3 Time Dimmable Over 1-10 Volts. Voltage: 230v Length: 18.2cm Width: 8.8cm Height: 3.5cm Weight: 0.57kg

470500 LED Power Unit 100W, 24V

Wed, 08 Sep 2010 01:44:18 +0000

Part No: 470500 24V 100W LED Driver. Voltage: 230v Length: 18.2cm Width: 8.8cm Height: 3.5cm Weight: 0.62kg

470506 LED Power Unit 60W, 24V

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 470506 24V 60W LED Driver. Voltage: 230v Length: 17.5cm Width: 7.8cm Height: 3.5cm Weight: 0.3kg

233032 Alu Profile For GapLED

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 233032 Aluminium Profile For GapLED, Including 5 Holding Clips And Fastening Screws. Length: 100cm Width: 0.5cm Height: 1.5cm Recess Width: 0.5cm Recess Depth: 1.6cm Weight: 0.07kg

233030 Mounting Clips For GapLED

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 233030 100 Piece Set Of Mounting Clips For The GapLED, Including Fastening Screws. Material: Acrylic Length: 1.2cm Width: 1.5cm Height: 1.5cm Weight: 1.1kg

233031 Feed-In Set For GapLED

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 233031 Feed In Set For GapLED With Longitudinal connector and end cap. Operating Load: 44w maximum Dimensions: Length: 150cm Accessories included: Centre connector, end cap and 3 piece shrink tube.

233022 GapLED In Warm White On A 10 Metre Coil

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 233022 10 Metre Roll Of Flexible GapLED In Warm White. Bulb: LED included (22w per strip) Voltage: 24v Length: 1000cm Width: 0.25cm Height: 0.85cm Separable every 16.7cm LED Spacing: 2.8cm Connection Length: 150cm Weight: 0.66kg Please note that this flexible LED strip is supplied less power supply. The following power supplies are available for this product; the 470506 or the 470500. This GapLED is also dimmable if used with the 470540 power supply. There are plastic insulated LED-strips with special narrow cross section for joining applications. The minimum bending radius is 1.3cm. Please also note that a maximum of 20 metres of this GapLED can be operated on one feed-in. By an output higher than 44w a new feed-in must be made. (See 233031 (Feed-In Set). Other accessories available for this product are the 233030 (mounting clips) and the 233032 (aluminium profile).

233021 GapLED In White On A 10 Metre Coil

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 233021 10 Metre Roll Of Flexible GapLED In White. Bulb: LED included (22w per strip) Voltage: 24v Length: 1000cm Width: 0.25cm Height: 0.85cm Separable every 16.7cm LED Spacing: 2.8cm Connection Length: 150cm Weight: 0.66kg Please note that this flexible LED strip is supplied less power supply. The following power supplies are available for this product; the 470506 or the 470500. This GapLED is also dimmable if used with the 470540 power supply. There are plastic insulated LED-strips with special narrow cross section for joining applications. The minimum bending radius is 1.3cm. Please also note that a maximum of 20 metres of this GapLED can be operated on one feed-in. By an output higher than 44w a new feed-in must be made. (See 233031 (Feed-In Set). Other accessories available for this product are the 233030 (mounting clips) and the 233032 (aluminium profile).

228722 Earth Spike

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228722 Galvanised Steel Earth Spike For Alpa II, Alpa Cone, Belpa II, Myra And Ova Floor Lamps. Diameter: 14cm Height: 37cm Weight: 1.2kg

228692 End Piece/Earth Spike For Belpa II And Myra Floor Lamps

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228692 Earth Spike/End Piece For Belpa II And Myra Floor Lamps In Silver Grey. Material: Aluminium Diameter: 3cm Height: 30cm Weight: 0.186kg

228702 Base For Belpa II And Myra Floor Lamps

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228702 Silver Grey Base For Belpa II And Myra Floor Lamps. Material: Aluminium Diameter: 14cm Height: 9cm Weight: 0.426kg

228682 Extension Stick For Belpa II And Myra Floor Lamps

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228682 Silver Grey Extension Stick For Belpa II And Myra Floor Lamps. Material: Aluminium Diameter: 3cm Height: 30cm

228902 Belpa II Lamp Head

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228902 Belpa II Lamp Head E27 24W Max IP55 Garden Bollard Light In Silver Grey. Material: Aluminium / Light Surface PC Diameter: 7.3cm Height: 61cm Stick Length: 30cm Cable Length: 2 metres Weight: 0.8kg Please note that this fitting is supplied less lamp. The following accessories are also available for this outside bollard light, 228682 (extension rod), 228692 (end piece), 228702 (base for lamp head) and 228722 (earth spike).

228892 Belpa II Wall

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228892 Belpa II E27 24W Max IP55 Wall Light In Silver Grey. Material: Aluminium / Light Surface PC Width: 11cm Height: 42cm Depth: 13cm Head Diameter: 10cm Weight: 0.95kg Please note that this fitting is supplied less lamp. This fitting is also available in Anthracite Finish. Please specify below the colour fitting that you require

229012 SXL HIT Floodlight 400W Asymmetrical

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229012 SXL E40/HIT 400W IP65 Asymmetrical Metal Halide Floodlight In Silver Grey. Material: Aluminium Width: 41cm Height: 54cm Depth: 16.5cm Weight: 9.65kg Please note that this floodlight is supplied less lamp.

227691 Extension Stick For SXL ECO Asymmetrical Floodlight In Silver Grey And Also The SXL HIT-DE 70W / 150W

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 227691 White Extension Stick For SXL HIT-DE 70W / 150W And SXL ECO Asymmetrical Floodlight. Material: Steel Length: 80.5cm Width: 3cm Height: 3cm Weight: 1.8kg Base Plate Length: 12cm x Width: 12cm

229001 SXL HIT-DE 150W Asymmetrical IP65 Floodlight In White

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229001 SXL HIT-DE 150W IP65 Asymmetrical Metal Halide Floodlight In White. Material: Aluminium Width: 31cm Height: 42cm Depth: 12.5cm Weight: 5.8kg The following accessories are available for this floodlight, 227691 (extension stick), 229009 (protective grill) and the 229008 (diffuser). Please note that this floodlight is supplied less lamp. This fitting is also available in black and silver grey. Please specify below the colour floodlight that you require

229044 SXL HIT-DE 70W Asymmetrical IP65 Floodlight

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229044 SXL HIT-DE 70W IP65 Asymmetrical Metal Halide Floodlight In Silver Grey. Material: Aluminium Width: 31cm Height: 42cm Depth: 12.5cm Weight: 5.8kg The following accessories are available for this floodlight, 227698 (extension stick), 229009 (protective grill) and the 229008 (diffuser). Please note that this floodlight is supplied less lamp.

229008 Diffuser For SXL HIT-DE 70W / 150W And SXL ECO

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229008 Diffuser For SXL HIT-DE 70W / 150W And SXL ECO Floodlight. Material: Galvanised Steel Length: 32.6cm Width: 25.6cm Height: 3.1cm Included with this diffuser are 4 stainless steel clamps.

229009 Protective Grill For SXL HIT-DE 70W / 150W And SXL ECO

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229009 Protective Grill For SXL HIT-DE 70W / 150W And SXL ECO Asymmetrical Floodlight. Material: Galvanised Steel Length: 20cm Width: 18.5cm Height: 3.2cm Weight: 0.22kg Included with this grill are 4 stainless steel clamps.

227698 Extension Stick For SXL ECO Asymmetrical Floodlight In Silver Grey And Also The SXL HIT-DE 70W / 150W

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 227698 Silver Grey Extension Stick For SXL HIT-DE 70W / 150W And SXL ECO Asymmetrical Floodlight. Material: Steel Length: 80.5cm Width: 3cm Height: 3cm Weight: 1.8kg Base Plate Length: 12cm x Width: 12cm

229192 SXL ECO Asymmetrical IP65 Floodlight

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229192 SXL ECO Asymmetrical 2x24W E27 IP65 Outdoor Floodlight In Silver Grey. Material: Aluminium Width: 31cm Height: 42cm Depth: 12.5cm Please note that this fitting is supplied less lamps. There are also accessories available for this product. See product codes 227698 (extension stick), 229009 (protective grill) and 229008 (diffuser).

228041 Extension Box For Lux 49 Display Lamp In White

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228041 IP55 Extension Box Including Stick For Lux 49 Display Lamp In White. Material: Aluminium Length: 14cm Width: 9cm Depth: 9cm Extension Stick Length: 50cm Weight: 0.77kg

228040 Extension Box For Lux 49 Display Lamp In Black

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228040 IP55 Extension Box Including Stick For Lux 49 Display Lamp In Black. Material: Aluminium Length: 14cm Width: 9cm Depth: 9cm Extension Stick Length: 50cm Weight: 0.77kg

228031 Extension Arm For Lux 49 Display Lamp In White

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228031 Extension Arm For The Lux 49 Display Lamp In White. Material: Steel Dimensions: Canopy Length: 9.5cm x Width 5cm Extension Arm Length: 50cm

228030 Extension Arm For Lux 49 Display Lamp In Black

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228030 Extension Arm For The Lux 49 Display Lamp In Black. Material: Steel Dimensions: Canopy Length: 9.5cm x Width 5cm Extension Arm Length: 50cm

228021 Lux 49 IP54 Display Lamp In White

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228021 Lux 49 4x9W TC-S Display Lamp In White IP54. Material: Plastic Swivel Range: 180 degrees Length: 18cm Width: 24cm Height: 13cm Please note that this fitting is supplies complete with 4 x 9w TC-S 2 pin colour 4000k compact fluorescent lamps.

228020 Lux 49 IP54 Display Lamp In Black

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 228020 Lux 49 4x9W TC-S Display Lamp In Black IP54. Material: Plastic Swivel Range: 180 degrees Length: 18cm Width: 24cm Height: 13cm Please note that this fitting is supplies complete with 4 x 9w TC-S 2 pin colour 4000k compact fluorescent lamps.

229395 Holder For Vano Wing

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229395 Wall holder for Vano Wing T5 54W Wall/Sign Light. Material: Steel Height: 13.5cm Base Plate Length: 8cm Base Plate Width: 5cm Weight: 0.26kg

229392 Vano Wing PL

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229392 Vano Wing PL 2G11/TC-L 36W Wall Light In Silver Grey IP65. Material: Aluminium Width: 50cm Height: 7.5cm Depth: 15.5cm Weight: 3kg Supplied complete with asymmetrical reflector and built in electronic ballast. Please note that this fitting is supplied with a 36w TC-I colour 4000k, compact fluorescent lamp.

229394 Vano Wing

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 229394 Vano Wing T5 54W Sign Light In Silver Grey IP65. Material: Aluminium Width: 123.5cm Height: 7.5cm Depth: 15.5cm Weight: 5.4kg Supplied complete with asymmetrical reflector and built in electronic ballast. Please note that this fitting is supplied complete with a T5 fluorescent lamp 54w high output, colour 4000k.

232221 Earth Spike For Square Pole

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232221 Earth Spike For 232236 Square Pole 30 & 232246 Square Pole 60. Material: Stainless steel 304 Dimensions: Base diameter: 18cm Spike Length: 50cm

232220 Concrete Anchor Set For Square Pole

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232220 Concrete Anchor Set For 232236 Square Pole 30 & 232246 Square Pole 60. Material: Stainless steel 304 Dimensions: Base diameter 18cm This set consists of 1 mounting plate, 2 anchor screws, 2 washers and 2 hat nuts.

232246 Square Pole 60

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232246 Square Pole 60 E27 Brushed Aluminium/Varnished Mini Square Garden Bollard Light IP44 Material: Aluminium/Acrylic Length: 13cm Width: 13cm Height: 60cm Base Length: 18cm Base Width: 18cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 6cm, Length: 15cm Please note that this fitting is supplied less lamp Concrete anchor set and earth spike are available for this product. Please see product codes 232220 & 232221.

232236 Square Pole 30

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232236 Square Pole 30 E27 Brushed Aluminium/Varnished Mini Square Bollard Light IP44 Material: Aluminium/Acrylic Length: 13cm Width: 13cm Height: 30cm Base Length: 18cm Base Width: 18cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 6cm, Length: 15cm Please note that this fitting is supplied less lamp Concrete anchor set and earth spike are available for this product. Please see product codes 232220 & 232221.

232276 Rox Acrylic Pole 90

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232276 Rox Acrlic Pole 90 E27 Brushed Aluminium/White Outdoor Garden Bollard Light IP44 Material: Aluminium/Acrylic Diameter: 12.5cm Height: 90cm Base Diameter: 18cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 11cm, Length: 17cm Please note that this fitting is supplied less lamp Concrete anchor set and earth spike are available for this product. Please see product codes 229860 & 229861.

232266 Rox Acrylic Pole 60

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232266 Rox Acrlic Pole 60 E27 Brushed Aluminium/White Mini Bollard Light IP44 Material: Aluminium/Acrylic Diameter: 12.5cm Height: 60cm Base Diameter: 18cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 11cm, Length: 17cm Please note that this fitting is supplied less lamp Concrete anchor set and earth spike are available for this product. Please see product codes 229860 & 229861.

232256 Rox Acrylic Pole 30

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 232256 Rox Acrlic Pole 30 E27 Brushed Aluminium/White Mini Bollard Light IP44 Material: Aluminium/Acrylic Diameter: 12.5cm Height: 30cm Base Diameter: 18cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 11cm, Length: 17cm Please note that this fitting is supplied less lamp Concrete anchor set and earth spike are available for this product. Please see product codes 229860 & 229861.

230746 Rox Acrylic Up-Down E27

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 230746 Rox Acrlic Up-Down E27 Brushed Aluminium/White Styled Wall Light IP44 Material: Aluminium/Acrylic Width: 16.5cm Height: 36cm Depth: 16cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 11cm, Length: 17cm Please note that this fitting is supplied less lamp

230736 Rox Acrylic Single E27

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 230736 Rox Acrlic Single E27 Brushed Aluminium/White Styled Wall Light IP44 Material: Aluminium/Acrylic Width: 16.5cm Height: 20.5cm Depth: 16cm Lamp Information: E27/energysaver (20w max) Maximum dimensions for lamp: Diameter: 11cm, Length: 17cm Please note that this fitting is supplied less lamp

451022 35VA IP40 Round Transformer

Wed, 08 Sep 2010 01:44:19 +0000

Part No: 451022. IP40 35vA Transformer. 30cm primary lead. 30cm secondary lead. Diameter: 5.7cm Height: 8cm Voltage: 230 volts Maximum load: 35 watts Temperature protected to 110 degrees C Short circuit proof

452021 20VA/24V IP40 Round Transformer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 452021. IP40 20vA/24V Transformer. 25cm primary lead. 25cm secondary lead. Diameter: 5cm Height: 6.5cm Voltage: 230 volts Maximum load: 20 watts Temperature protected to 110 degrees C Short circuit proof

451021 20VA IP40 Round Transformer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 451021. IP40 20vA Transformer. 25cm primary lead. 25cm secondary lead. Diameter: 5cm Height: 6.5cm Voltage: 230 volts Maximum load: 20 watts Temperature protected to 110 degrees C Short circuit proof

227150 150VA IP44 Transformer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 227150. IP44 150vA Transformer With 2 Pin Plug Included. 2 metre primary lead with plug. 1 metre secondary lead. Length: 8cm Width: 11cm Height: 7.5cm

227160 60VA IP44 Transformer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 227160. IP44 60vA Transformer With 2 Pin Plug Included. 2 metre primary lead with plug. 1 metre secondary lead. Length: 6cm Width: 10cm Height: 6.3cm

451010 10VA IP44 Transformer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 451010. IP44, 10vA Transformer, Complete With 2 Pin Plug. 2 metre primary lead with plug. Secondary lead 2 metre. Length: 5.5 cm Width: 8cm Height: 5cm

228360 Gimble Out 90

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 228360 Gimble Out Floor G5.3/MR16 Low Voltage IP67 Groundlight In Brushed Aluminium. Height: 12cm Diameter: 15cm Cut-out: 13cm Fitting depth: 13.5cm Swivel range: 85 degrees Maximum load: 35 watts Material: Aluminium/glass Fitting supplied complete with mounting pot. Please note that this fitting is supplied less lamp and also less transformer.

543745 QRB111 12V 75W Lamp 45 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543745. QRB111 12V 75W G53/Low Pressure Halogen Bulb, With 45 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543724 QRB111 12V 75W Lamp 24 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543724. QRB111 12V 75W G53/Low Pressure Halogen Bulb, With 24 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543708 QRB111 12V 75W Lamp 8 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543708. QRB111 12V 75W G53/Low Pressure Halogen Bulb, With 8 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543545 QRB111 12V 50W Lamp 45 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543545. QRB111 12V 50W G53/Low Pressure Halogen Bulb, With 45 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543524 QRB111 12V 50W Lamp 24 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543524. QRB111 12V 50W G53/Low Pressure Halogen Bulb, With 24 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543324 QRB111 12V 35W Lamp 24 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543324. QRB111 12V 35W G53/Low Pressure Halogen Bulb, With 24 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543345 QRB111 12V 35W Lamp 45 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543345. QRB111 12V 35W G53/Low Pressure Halogen Bulb, With 45 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543508 QRB111 12V 50W Lamp 8 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543345. QRB111 12V 50W G53/Low Pressure Halogen Bulb, With 8 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543308 QRB111 12V 35W Lamp 8 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543308. QRB111 12V 35W G53/Low Pressure Halogen Bulb, With 8 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543245 QRB111 12V 20W Lamp 45 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543245. QRB111 12V 20W G53/Low Pressure Halogen Bulb, With 45 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543224 QRB111 12V 20W Lamp 24 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543224. QRB111 12V 20W G53/Low Pressure Halogen Bulb, With 24 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

543208 QRB111 12V 20W Lamp 8 Degree Beam Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 543208. QRB111 12V 20W G53/Low Pressure Halogen Bulb, With 8 Degree Beam.

Socket: G53
Diameter: 11.1cm
Voltage: 12 volts
Average lamp life: 2,000 hours
Weight: 0.078 kg
Colour temperature: 2700 kelvin

508941 G9 9W Energysaver Lamp Colour 4000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 508941. G9 9W Energysaver Bulb, Colour 4000K.

Socket: G9
Length: 8.5cm
Diameter: 3.3cm
Average lamp life: 8,000 hours
Colour temperature: 4000 Kelvin
Lumen output: 405 lm

508940 G9 9W Energysaver Lamp Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 508940. G9 9W Energysaver Bulb, Colour 2700K.

Socket: G9
Length: 8.5cm
Diameter: 3.3cm
Average lamp life: 8,000 hours
Colour temperature: 2700 Kelvin
Lumen output: 405 lm

508931 G9 7W Energysaver Lamp Colour 4000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 508931. G9 7W Energysaver Bulb, Colour 4000K.

Socket: G9
Length: 8cm
Diameter: 3.3cm
Average lamp life: 8,000 hours
Colour temperature: 4000 Kelvin
Lumen output: 285 lm

508930 G9 7W Energysaver Lamp Colour 2700K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 508930. G9 7W Energysaver Bulb, Colour 2700K.

Socket: G9
Length: 8cm
Diameter: 3.3cm
Average lamp life: 8,000 hours
Colour temperature: 2700 Kelvin
Lumen output: 285 lm

548211 40W T8 Ring Tube Colour 4000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 548211. T8 40W G10q/Energysaver Circular Tube, Colour 4000K.

Dimensions: 40.6cm diameter
Average lamp life: 10,000 hours

548210 40W T8 Ring Tube Colour 3000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 548210. T8 40W G10q/Energysaver Circular Tube, Colour 3000K.

Dimensions: 40.6cm diameter
Average lamp life: 10,000 hours

548231 32W T8 Ring Tube Colour 4000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 548231. T8 32W G10q/Energysaver Circular Tube, Colour 4000K.

Dimensions: 30.5cm diameter
Average lamp life: 10,000 hours

548230 32W T8 Ring Tube Colour 3000K

Wed, 08 Sep 2010 01:44:20 +0000

Part No: 548230. T8 32W G10q/Energysaver Circular Tube, Colour 3000K.

Dimensions: 30.5cm diameter
Average lamp life: 10,000 hours

Global Ceiling Fans Remote Control

Wed, 08 Sep 2010 01:44:20 +0000

Remote control control for use with the following Global Ceiling Fans; Global Mercury, Global Jupiter; and Global Santa Monica.

Global 52" Stainless Steel Neptune Ceiling Fan With Halogen Light And Remote Control

Wed, 08 Sep 2010 01:44:20 +0000

Global 114123 52" Neptune Ceiling Fan In Stainless Steel, Complete With Halogen Light And Remote Control.

52" Matt Silver Blades
Stainless Steel finish body
100w halogen light (supplied with lamp)
Dual Mount
Remote control supplied

Global 52" Neptune Ceiling Fan In White Complete With Halogen Light And Remote Control

Wed, 08 Sep 2010 01:44:20 +0000

Global 114086 52 Inch Neptune Ceiling Fan In White, Complete With Halogen Light And Remote Control.

52" White Blades
White finish body
100w halogen light (supplied with lamp)
Dual Mount
Remote control supplied

Global 36" Rimini Ceiling Fan In White With Globe Light And Reversible White/White And Cane Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global 36 Inch Rimini Ceiling Fan In White, With Reversible White/White And Cane Blades, Complete With Globe Light.

36 Inch Reversible White/White & Cane Blades
Globle Light
Dual Mount

Global 48" Kroma Ceiling Fan In Chrome

Wed, 08 Sep 2010 01:44:20 +0000

Global Kroma 111993 48 Inch Ceiling Fan In Polished Chrome.

48 Inch blades
3 Steel Blades
Polished chrome body
Complete with 6" Drop Rod
Can be used for commercial use and domestic applications
Operated by pull cords (3 speed pull cord on the fan)
Complete with Reverse switch to enable heat recover in the winter

Global 36" Kroma Ceiling Fan In Chrome

Wed, 08 Sep 2010 01:44:20 +0000

Global Kroma 111986 36 Inch Ceiling Fan In Polished Chrome.

36 Inch blades
3 Steel Blades
Polished chrome body
Complete with 6" Drop Rod
Operated by pull cords (3 speed pull cord on the fan)
Complete with Reverse switch to enable heat recover in the winter

Global 36" Rio Ceiling Fan In White And Brass With 3 Lights And Reversible White/White And Cane Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global 110347 Rio 36 Inch Ceiling Fan In White And Brass With Reversible White And Cane Or White Blades, Complete With A 3 Light Kit.

36 Inch blades
Reversible White & Cane, or White Blades
3 Light Kit
Requires 3 x E14 60w lamps (lamps not included)
Dual mount
Optional remote control available

Global 36" Rio Ceiling Fan In Polished Brass With 3 Lights And Reversible Oak And Cane/Mahogany Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global Rio 36 Inch Ceiling Fan In Polished Brass With Reversible Oak & Cane/Mahogany Black, Complete With A 3 Light Kit.

36 Inch blades
Reversible Oak & Cane/Mahogany Blades
3 Light Kit
Dual mount

Global 48" Scorpion Ceiling Fan In Chrome With 3 Light Spots And Washed Oak Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global Scorpion 111603 48 Inch Chrome Finish Ceiling Fan With Washed Oak Blades, Complete With 3 Light Spots.

48 Inch blades
Washed oak blades
Directional 3 Light Spots
Dual mount
Requires 3 x 40w E14 R50 reflector lamps (lamps not included)

Global 42" Bali Stainless Steel Ceiling Fan With 3 Lights And Reversible Beech/Maple Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global 111658 Bali 42 Inch Ceiling Fan With 3 Lights In Stainless Steel, With Reversible Beech/Maple Blades.

Directional halogen light kit
Reversible beech/maple blades
Dual mount
3 x GU10 lamps included

Global San Diego Polished Brass 42" 3 Light Ceiling Fan With Reversible Oak And Cane/Mahogany Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global 111450 San Diego 42 Inch Ceiling Fan In Polished Brass, Complete With 3 Lights And Reversible Oak And Cane/Mahogany Blades.

42 Inch blades
3 Light Kit
Reversible white and cane or white blades
Dual mount
Requires 3 x 60w E14 lamps (supplied less lamps)
Optional remote control available

Global San Diego 42" 3 Light White And Brass Ceiling Fan With Reversible White And Cane Or White Blades

Wed, 08 Sep 2010 01:44:20 +0000

Global 111474 San Diego 42 Inch Ceiling Fan In White And Brass, Complete With 3 Lights And Reversible White And Cane Or White Blades.

42 Inch blades
3 Light Kit
Reversible white and cane or white blades
Dual mount
Requires 3 x 60w E14 lamps (supplied less lamps)
Optional remote control available

Global 114406 42" Duo Ceiling Fan With 2 Lights

Wed, 08 Sep 2010 01:44:20 +0000

Global Duo 114406 42 Inch Chrome Finish Ceiling Fan With Gloss Black Blades, Complete With 2 Lights.

42 Inch blades
2 Light Kit
Dual mount
Requires 1 x 60w E14 golf ball lamp & 2 x 25w pygmy lamps
Fan CANNOT be flush mounted

Global 42" Genoa Stainless Steel Ceiling Fan With 3 Lights

Wed, 08 Sep 2010 01:44:20 +0000

Global Genoa 114451 42 Inch Ceiling Fan In Stainless Steel, Complete With 3 Lights And Maple Blades, (Beech On Reverse).

42 Inch blades
3 Light Kit
Reversible beech blades
Dual mount motor
Requires 3 x 60w G9 lamps (supplied with lamps)

Global 42" Genoa Gloss White Ceiling Fan With 3 Lights

Wed, 08 Sep 2010 01:44:20 +0000

Global Genoa 114437 42 Inch Ceiling Fan In Gloss White, Complete With 3 Lights And Reversible Oak And Cane/Mahogany Blades.

42 Inch blades
3 Light Kit
Reversible white blades
Dual mount motor
Requires 3 x 60w G9 lamps (supplied with lamps)

Global 42" Orlando Ceiling Fan In White And Brass With 3 Lights

Wed, 08 Sep 2010 01:44:20 +0000

Global Orlando 111566 42 Inch Ceiling Fan In White And Brass, Complete With 3 Lights And Reversible White/White & Cane Blades.

42 Inch blades
3 Light Kit
Reversible white/white and cane effect blades
Optional remote control available
Fan CANNOT be flush mounted
Requires 3 x E14 60w lamps (supplied less lamps)

Global 42" Orlando Polished Brass 3 Light Ceiling Fan

Wed, 08 Sep 2010 01:44:20 +0000

Global Orlando 111559 42 Inch Ceiling Fan In Polished Brass, Complete With 3 Lights And Reversible Oak And Cane/Mahogany Blades.

42 Inch blades
3 Light Kit
Reversible oak & cane/mahogany effect blades
Optional remote control available
Fan CANNOT be flush mounted
Requires 3 x E14 60w lamps (supplied less lamps)

Global Santa Monica Polished Brass 42" Ceiling Fan With 3 Lights And Remote Control

Wed, 08 Sep 2010 01:44:20 +0000

Global Santa Monica 111542 42 Inch Ceiling Fan In Polished Brass With Reversible Oak And Cane/Mahogany Blades, Complete With 3 Lights And Remote Control Handset.

42 Inch blades
3 Light Kit
Reversible oak & cane/mahogany effect blades
Supplied complete with remote control handset
Dual mount
12 Inch drop rod
Requires 3 x E14 60w lamps (supplied less lamps)

Global Santa Monica 42" 3 Light Kit Ceiling Fan With Remote Control In White With Polished Brass Trim

Wed, 08 Sep 2010 01:44:20 +0000

Global Santa Monica 111535 42 Inch Ceiling Fan In With With Brass Trim, Complete With 3 Lights And Remote Control Handset.

42 Inch blades
3 Light Kit
Reversible white cane effect blades
Supplied complete with remote control handset
Dual mount
12 Inch drop rod
Requires 3 x E14 60w lamps (supplied less lamps)

Varilight HDQ6LS 1 Gang 630vA 2 Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: HDQ6LS Varilight 1 Gang 630vA 2 Way Push-On Push-Off Inductive Load Dimmer Switch For Wire Wound Transformers In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish.

Varilight HDQ10S 1 Gang 250W 1-Way Rotary Fan Regulator Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part No: HDQ10S Varilight 1 Gang 250W 1 Way Rotary Fan Regulator Dimmerswitch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These Dimmer Switches Are Designed For Use With Fans And Some Motors. (Please Check With Manufacturer Of Appliance First).

Varilight iDQS004S 4 Gang Slave For Remote Control / Touch Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQS004S Varilight 4 Gang Slave For Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish.

Varilight iDQS003S 3 Gang Slave For Remote Control / Touch Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQS003S Varilight 3 Gang Slave For Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish.

Varilight iDQS002S 2 Gang Slave For Remote Control / Touch Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQS002S Varilight 2 Gang Slave For Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish.

Varilight iDQS001S 1 Gang Slave For Remote Control / Touch Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQS001S Varilight 1 Gang Slave For Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish.

Varilight iDQi254MS 4 Gang 250W 1-Way Remote Control Dimmer On A Twin Plate

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi254MS Varilight 4 Gang 250W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range On A Twin Plate, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight iDQi403MS 3 Gang 400W 1-Way Remote Control Dimmer On A Twin Plate

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi403MS Varilight 3 Gang 400W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range On A Twin Plate, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight iDQi402MS 2 Gang 400W 1-Way Remote Control Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi402MS Varilight 2 Gang 400W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight iDQi252MS 2 Gang 250W 1-Way Remote Control Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi252MS Varilight 2 Gang 250W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight iDQi601MS 1 Gang 600W 1-Way Remote Control Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi601MS Varilight 1 Gang 600W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight iDQi401MS 1 Gang 400W 1-Way Remote Control Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: iDQi401MS Varilight 1 Gang 400W 1 Way Remote Control / Touch Dimmer Switch In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Buttons. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These touch dimmers are recommended for use with GLS, GU10 and Electronic Low Voltage Transformers, Including Trailing Edge. These remote control dimmers can be programmed to receive any button of most remote controllers using a Varilight YRC8, 8 button controller.

Varilight HDQ77S 2 Gang Low Load 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ77S Varilight 2 Gang 2 Way Push On Push Off Low Load Dimmer In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with CFL Dimmable Energy Saving Lamps (Nominal Max Load 120W)

Varilight HDQ7S 1 Gang Low Load 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ7S Varilight 1 Gang 2 Way Push On Push Off Low Load Dimmer In The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with CFL Dimmable Energy Saving Lamps (Nominal Max Load 120W)

Varilight HDQ44S 4 Gang 250W 2-Way Push-On Push-Off Dimmer On A Twin Plate

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ44S Varilight 4 Gang 2 Way 250W Push On Push Off Dimmer On A Twin Plate in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ33S 3 Gang 400W 2-Way Push-On Push-Off Dimmer On A Twin Plate

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ33S Varilight 3 Gang 2 Way 400W Push On Push Off Dimmer On A Twin Plate in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ43S 3 Gang 250W 2-Way Push-On Push-Off Dimmer On A Twin Plate

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ43S Varilight 3 Gang 2 Way 250W Push On Push Off Dimmer On A Twin Plate in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ83S 2 Gang 400W 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ83S Varilight 2 Gang 2 Way 400W Push On Push Off Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ4S 2 Gang 250W 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ4S Varilight 2 Gang 250W Push On Push Off Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ2S 2 Gang 250W 1-Way Rotary Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ2S Varilight 2 Gang 250W 1 Way Rotary Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ9S 1 Gang 1000W 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ9S Varilight 1 Gang 1000W 2 Way Push On Push Off Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ3S 1 Gang 400W 2-Way Push-On Push-Off Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ3S Varilight 1 Gang 400W 2 Way Push On Push Off Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Varilight HDQ1S 1 Gang 400W 1-Way Rotary Dimmer

Wed, 08 Sep 2010 01:44:20 +0000

Part no: HDQ1S Varilight 1 Gang 400W 1-Way Rotary Dimmer in The Premium White Screwless Flat Plate Range, With Mirror Chrome (Polished Chrome) Knobs. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These dimmers are recommended for use with mains voltage lighting only, although they can be used to control low voltage lighting circuits but we would strongly recommend using the (IQ) Dimmer for these applications. Suitable Varilight transformers include the YT50L, YT70L, YT105, YT150 and the YT250.

Searchlight 4257-7CC Safia Chrome/Crystal 7 Light Bar Pendant

Wed, 08 Sep 2010 01:44:20 +0000

Part No. 4257-7CC Chrome Finish 7 Light Bar Pendant Draped With Crystal Beads And Drops. Height: 9cm Diameter: 42cm Length: 110cm Wattage: 7 x 60w E14 Fitting supplied less lamps

Searchlight 3810-10CC Safia Chrome/Glass 10 Light Ceiling Light

Wed, 08 Sep 2010 01:44:20 +0000

Part No. 3810-10CC Chrome Finish 10 Light Glass Drum Pendant With Sunflower Bead Centre Decoration. Height: 22cm Diameter: 40cm Wattage: 10 x 10w G4 Capsule Lamps Fitting supplied complete with lamps

Searchlight 9175-5CC Safia Chrome/Crystal Square Ceiling Light

Wed, 08 Sep 2010 01:44:20 +0000

Part No. 9175-5CC Square Flush Chrome Finish Ceiling Light Covered In Sunflower Crystal Beads. Height: 9cm Diameter: 40cm Wattage: 5 x 40w G9 Capsule Lamps Fitting supplied complete with lamps

Searchlight 9184-4CC Polly Chrome/Crystal 4 Light Ceiling Fitting

Wed, 08 Sep 2010 01:44:20 +0000

Part No. 9184-4CC Chrome Finish 4 Light Round Flush Ceiling Light Covered In Sunflower Crystal Beads. Height: 9cm Diameter: 42cm Wattage: 4 x 40w G9 Capsule Lamps Fitting supplied complete with lamps

Searchlight 8063-3CC Polly Chrome/Crystal 3 Light Ceiling Fitting

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 8063-3CC Chrome Finish 3 Light Ceiling Light With Glass Buttons And A Mirrored Diffuser. Height: 12cm Diameter: 33cm Wattage: 3 x 40w E14 Fitting supplied less lamps

Searchlight 4254-4CC Maya Chrome/Crystal 4 Light Oval Bar Ceiling Light

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 4254-4CC Oval Bar Chrome Finish 4 Light Ceiling Light Trimmed With Clear Crystal Drops. Height: 29cm Diameter: 54cm Length: 65cm Wattage: 4 x 40w E14 Fitting supplied less lamps

Searchlight 9071-52CC Limoges Chrome/Crystal 6 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9071-52CC Chrome Finish 6 Light Chandelier Trimmed With Sunflower Crystals. Height: 59cm Diameter: 52cm Wattage: 6 x 40w E14 Fitting supplied less lamps

Searchlight 9070-48CC Limoges Chrome/Crystal Semi Flush 3 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9070-48CC Chrome Finish Semi Flush Chandelier Trimmed With Sunflower Crystals. Height: 42cm Diameter: 48cm Wattage: 3 x 40w E14 Fitting supplied less lamps

Searchlight 9112-52CC Versailles Chrome/Crystal 9 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9112-52CC Elegant 9 Light Chandelier In A Chrome Finish Trimmed With Crystal. Height: 72cm Diameter: 52cm Wattage: 9 x 40w E14 Fitting supplied less lamps

Searchlight 9112-52GO Versailles Gold Finish/Crystal 9 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9112-52GO Elegant 9 Light Chandelier In A Gold Plated Finish Trimmed With Crystal. Height: 72cm Diameter: 52cm Wattage: 9 x 40w E14 Fitting supplied less lamps

Searchlight 9113-39CC Versailles Chrome/Crystal Semi Flush 5 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9113-39CC Elegant 5 Light Semi Flush Chandelier In A Chrome Finish Trimmed With Crystal. Height: 38cm Diameter: 40cm Wattage: 5 x 40w E14 Fitting supplied less lamps

Searchlight 9113-39GO Versailles Gold Finish/Crystal Semi Flush 5 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9113-39GO Elegant 5 Light Semi Flush Chandelier In A Gold Plated Finish Trimmed With Crystal. Height: 38cm Diameter: 40cm Wattage: 5 x 40w E14 Fitting supplied less lamps

Searchlight 6942-2CC Martina Chrome/Glass 2 Light Traditional Wall Light

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 6942-2CC Styled Chrome Finish 2 Light Traditional Wall Light, Adorned With Crystal Glass Trimmings. Height: 36cm Projection: 17cm Diameter: 30cm Wattage: 2 x 60w E14 Fitting supplied less lamps

Searchlight 6945-5CC Martina Chrome/Glass 5 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 6945-5CC Styled Chrome Finish 5 Light Chandelier Adorned With Crystal Glass Trimmings. Height: 40cm Diameter: 50cm Wattage: 5 x 60w E14 Fitting supplied less lamps

Searchlight 6948-8CC Martina Chrome/Glass 8 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 6948-8CC Delicately Styled Chrome Finish 8 Light Chandelier With Crystal Glass Trimmings. Height: 58cm Diameter: 61cm Wattage: 8 x 60w E14 Fitting supplied less lamps

Searchlight 9125-5CC Amelia Chrome/Crystal 5 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9125-5CC Chrome Finish Chandelier Fitting With Beaded Arms Decorated With Elegant Drops. Height: 55cm Diameter: 52cm Wattage: 5 x 60w E14 Fitting supplied less lamps

Searchlight 9128-8CC Amelia Chrome/Crystal 8 Light Chandelier

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9128-8CC Chrome Finish Chandelier Fitting With Beaded Arms Decorated With Elegant Drops. Height: 60cm Diameter: 62cm Wattage: 8 x 60w E14 Fitting supplied less lamps

Searchlight 9190CC Safia Chrome/Crystal 24 Light Ceiling Light

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9190CC Chrome Finish Oval 24 Light Ceiling Fitting With Asfour Crystal.

Height is adjustable

Height: 120cm Length: 123cm Width: 70cm Wattage: 24 x 40w E14 Fitting supplied less lamps

Searchlight 1644-4CC Crystal 4 Light Chrome/Crystal Modern Ceiling Light

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 1644-4CC Halogen Chrome Finish Ceiling Fitting, With Drops. Height: 22cm Diameter: 35cm Wattage: 4 x 40w G9 Capsule Lamps Fitting supplied complete with lamps

Searchlight 5116-6CC Metropolis 6 Light Chrome/Crystal Ceiling Fitting

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 5116-6CC Square Cage Halogen Chrome Finish Flush Ceiling Fitting, Decorated With Ball Drops. Height: 25cm Diameter: 25cm Wattage: 6 x 10w G4 Capsule Lamps Fitting supplied complete with lamps

Searchlight 9116-6CC Metropolis Chrome/Crystal 6 Light Ceiling Fitting

Wed, 08 Sep 2010 01:44:21 +0000

Part No. 9116-6CC Cage Halogen Chrome Finish Flush Ceiling Fitting, Decorated With Ball Drops. Height: 25cm Diameter: 25cm Wattage: 6 x 10w G4 Capsule Lamps Fitting supplied complete with lamps

5144 Stainless Steel Lawn Edger 1040mm G5144

Wed, 08 Sep 2010 01:44:21 +0000

Lawn Edger Stainless Steel 1040mm/41".

Stainless steel blade
Steel shaft

5143 Stainless Steel Digging Fork 1040mm G5143

Wed, 08 Sep 2010 01:44:21 +0000

Digging Fork Stainless Steel 1040mm/41".

Stainless steel prongs
Strong plastic shaft with steel core for durability
Weight: 2.2kg

5141 Stainless Steel Border Fork 1000mm G5141

Wed, 08 Sep 2010 01:44:21 +0000

Border Fork Stainless Steel 1000mm/39 1/2".

Stainless steel prongs
Strong plastic shaft with steel core for durability
Weight: 1.7kg

5142 Stainless Steel Digging Spade 1040mm G5142

Wed, 08 Sep 2010 01:44:21 +0000

Digging Spade Stainless Steel 1040mm/41".

Stainless steel blade
Strong plastic shaft with steel core for durability
Weight: 2.2kg

5140 Stainless Steel Border Spade 1000mm G5140

Wed, 08 Sep 2010 01:44:21 +0000

Border Spade Stainless Steel 1000mm/39 1/2".

Stainless steel blade
Strong plastic shaft with steel core for durability
Weight: 1.7kg

Maxima 5732 Hand Fork G5732

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Hand Fork.

Traditional style three pronged fork, ideal multi purpose cultivator (270mm/10 1/2")
Chrome plated prongs
Hardwood handle with soft, non-slip grip
Weight: 186g

Maxima 5731 Rockery Trowel G5731

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Rockery Trowel.

Strong, narrow pointed blade for use in small borders (300mm/12")
Chrome plated blade
Hardwood handle with soft, non-slip grip
Weight: 180g

Maxima 5730 Garden Trowel G5730

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Garden Trowel.

Strong, pointed blade for easy digging (300mm/12")
Chrome plated blade
Hardwood handle with soft, non-slip grip
Weight: 208g

5126 Weeding Fork And Hand Trowel Set G5126

Wed, 08 Sep 2010 01:44:21 +0000

Legend Weeding & Hand Trowel Set.

Stainless steel blades and prongs
Lacquered hardwood handles
Combined weight: 600g

5129 Stainless Steel Rockery Fork G5129

Wed, 08 Sep 2010 01:44:21 +0000

Legend Rockery Fork.

Stainless steel prongs (285mm/11 1/4")
Lacquered hardwood handle
Weight: 200g

5127 Stainless Steel Rockery Trowel G5127

Wed, 08 Sep 2010 01:44:21 +0000

Legend Rockery Trowel.

Stainless steel blade (295mm/11 1/2")
Lacquered hardwood handle
Weight: 200g

5125 Stainless Steel Weeding Fork G5125

Wed, 08 Sep 2010 01:44:21 +0000

Legend Weeding Fork.

Stainless steel prongs (250mm/10")
Lacquered hardwood handle
Weight: 200g

5124 Stainless Steel Hand Trowel G5124

Wed, 08 Sep 2010 01:44:21 +0000

Legend Hand Trowel.

Stainless steel blade (250mm/10")
Lacquered hardwood handle
Weight: 250g

5162 Hatchet G5162

Wed, 08 Sep 2010 01:44:21 +0000

Hatchet-steel 1.2lb 0.55kg.

Chrome tubular steel shaft
Fine polished, drop forged, steel head
Comfortable sure-grip rubber handle
Button down leather sheath with belt loop

Maxima 5014 Telescopic Anvil Loppers G5014

Wed, 08 Sep 2010 01:44:21 +0000

660 to 990mm/26 to 39" Maxima Anvil Lopper. Ideal for reaching the highest brances simply and comfortably. Gripping anvil hold stems firmly while the power level cutting action provides clean, easy cuts.

Non-stick coated and chrome plated blades for low friction use and resistance to rust
Precision ground, hardened steel blades
Extendable tubular steel handles with soft, non-slip grips
Fully adjustable blade tension to reduce jarring

5027 Bypass Loppers 590mm G5027 23

Wed, 08 Sep 2010 01:44:21 +0000

590mm/23" Legend Bypass Lopper.

Fully forged, hardened and tempered special steel blades
Barbed tangs and heavy duty ferrules
Lacquered hardwood handles
Weight: 1kg

5028 Bypass Loppers 660mm G5028

Wed, 08 Sep 2010 01:44:21 +0000

660mm/26" Legend Bypass Lopper.

Fully forged, hardened and tempered special steel blades
Barbed tangs and deep ferrules
Wood and rubber buffers to prevent jarring
Lacquered hardwood handles
Weight: 1.2kg

5042 Anvil Loppers G5042

Wed, 08 Sep 2010 01:44:21 +0000

720mm/28" Legend Anvil Lopper.

Anvil cut with cantilever action increases power and reduces effort by drawing the cut
Fully forged, hardened and tempered special steel blades
Non-stick coated blade
Barbed tangs and deep ferrules
Lacquered hardwood handles
Weight: 1.6kg

5043 Heavy Duty Bypass Loppers 750mm G5043

Wed, 08 Sep 2010 01:44:21 +0000

750mm/29" Legend Heavy Duty Bypass Lopper.

Fully forged, hardened and tempered special steel blades
Barbed tangs and deep ferrules
Lacquered hardwood handles
Weight: 1.8kg

Maxima 5674 Ratchet Anvil Pruners G5674

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Ratchet Anvil Pruners.

Weight: 100g
Easy ratchet action
Light, bright and right for all gardeners
Non-stick coated blade for low friction use and resistance to rust
Safety catch

Maxima 5635 Bypass Pruners G5635

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Bypass Pruners.

Weight: 175g
Perfect for delicate pruning work
Lightweight, pocket sized pruner for shrubs, heather, etc
Non-stick coated and chrome plated blades for low friction use and resistance to rust
Fully adjustable blade tension
Thumb-control safety catch
Two component handles

Maxima 5634 Pruning Snips G5634

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Pruning Snips.

Weight: 175g
Perfect for delicate pruning work
Lightweight, easy to use snips for dead heading, vine pruning and other precise tasks
Non-stick coated and chrome plated blades for low friction use and resistance to rust
Fully adjustable blade tension
Two component handles

Maxima 5636 Anvil Pruners G5636

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Anvil Pruners.

Weight: 179g
For pruning older wood
Anvil grips the branch for easier cutting
Non-stick coated and chrome plated blades for low friction use and resistance to rust
Fully adjustable blade tension
Thumb-control safety catch
Two component handles

G0920 Replacement Blade For The G0922 Foldaway Pruning Saw

Wed, 08 Sep 2010 01:44:21 +0000

Replacement Blade For The CK Tools G0922 Foldaway Pruning Saw.

0922 Foldaway Pruning Saw G0922

Wed, 08 Sep 2010 01:44:21 +0000

Foldaway Pruning Saw.

Weight: 200g
Precision, taper ground, razor sharp teeth cut on both push and pull strokes without clogging
Comfortable, cushioned handle
Secure safety catch
Replacement blade available for this product (see product code: G0920)

G0923SB Replacement Blade For The G0923 Quality Pruning Saw

Wed, 08 Sep 2010 01:44:21 +0000

Replacement Blade For The CK Tools G0923 Quality Pruning Saw.

0923 Quality Pruning Saw G0923

Wed, 08 Sep 2010 01:44:21 +0000

Pruning Saw.

Weight: 446g
Precision, taper ground, razor sharp teeth cut on both push and pull strokes without clogging
Comfortable, cushioned handle
Robust holster with belt loop
Spare blades available for this product (see product code: G0923SB)

9066 Pruning Knife G9066

Wed, 08 Sep 2010 01:44:21 +0000

Pruning Knife.

Blade length: 95mm/3 3/4"
Weight: 55g
Polished pruning blade with flat back
Brass riveted for smoother opening

9068L Locking Pruning Knife G9068L

Wed, 08 Sep 2010 01:44:21 +0000

Locking Pruning Knife.

Blade length: 110mm/4 1/4"
Weight: 70g
Polished pruning blade with flat back
Brass riveted for smoother opening
Locking function

5631 Standard Bypass Pruners G5631

Wed, 08 Sep 2010 01:44:21 +0000

Legend Standard Bypass Pruners.

Extra thin sharp blade which produces a fine cutting action
Non-stick coated blade
Shock absorbing buffer
Fine adjustment blade tension
Safety lock
Weight: 300g

5675 Ratchet Action Anvil Pruners G5675

Wed, 08 Sep 2010 01:44:21 +0000

Legend Ratchet Action Anvil Pruners.

Lightweight and versatile, equally at home cutting delicate flowers or slicing through the toughest branches
The composite body and moulded grips ensure a comfortable days pruning for both professional and keen gardeners
Non-stick coated blades
Safety lock
Weight: 315g

5612 Lightweight Bypass Pruners G5612

Wed, 08 Sep 2010 01:44:21 +0000

Legend Lightweight Bypass Pruners.

General purpose pruner with 2 stage lock for partial or full blade opening
Non-stick coated blades
Adjustable blade tension
Double sided safety lock
Complete with holster
Weight: 300g

5610 Heavy Duty Bypass Pruners G5610

Wed, 08 Sep 2010 01:44:21 +0000

Legend Heavy Duty Bypass Pruners.

Strong, heavy duty pruner
Non-stick coated blades
Shock absorbing buffer
Adjustable blade tension
Double sided safety lock
Complete with holster
Weight: 300g

5015 Maxima Lawn Edging Shears G5015

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Lawn Edging Shears.

Blade length: 175mm/7"
Weight: 1.5kg
Lightweight shears give a professional finish to the lawn edges
Non-stick coated and chrome plated blades for low friction use and resistance to rust
Tubular steel handles with soft, non-slip grips
Fully adjustable blade tension

5056 Lawn Edging Shears G5056

Wed, 08 Sep 2010 01:44:21 +0000

Legend Lawn Edging Shears.

Blade length: 180mm/7"
Weight: 1.2kg
Lightweight with hardened aluminium handles and long moulded grips
Hot drop forged and hard chrome armoured blades
Precisely hollow ground, self sharpening blades
Fully adjustable blade tension

5051 Heavy Duty Lawn Edging Shears G5051

Wed, 08 Sep 2010 01:44:21 +0000

Legend Heavy Duty Lawn Edging Shears.

Blade length: 209mm/8 1/4"
Weight: 2.4kg
Barbed tangs with pinned ferrules
Hot drop forged and hard chrome armoured blades
Precisely hollow ground, self sharpening blades
Lacquered, hardwood handles
Fully adjustable blade tension

5054 Lawn Shears G5054

Wed, 08 Sep 2010 01:44:21 +0000

Legend Lawn Shears.

Blade length: 175mm/6 3/4"
Weight: 1.3kg
Lightweight with hardened aluminium handles and long moulded grips
Hot drop forged and hard chrome armoured blades
Precisely hollow ground, self sharpening blades
Fully adjustable blade tension

5637 Maxima Single Handed Grass Shears G5637

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Single Handed Grass Shears.

Blade length: 115mm/4 1/2"
Weight: 357g
Blades rotate 180 degrees to cut awkward areas
Lightweight and clean cutting
Non-stick coated and chrome plated blades for low friction use and resistance to rust
Secure and precise safety catch for left or right hand use
Blades can cut either vertically or horizontally

5011 Maxima Long Reach Hedge Shears G5011

Wed, 08 Sep 2010 01:44:21 +0000

Maxima Long Reach Hedge Shears.

Blade length: 200mm/8"
Weight: 994g
Non-stick coated and chrome plated blades for low friction use and resistance to rust
precision ground, hardened carbon steel blades
Hardwood handles with soft, non-slip grips
Fully adjustable blade tension
Shock absorbing buffers to reduce jarring

5010 Maxima Lightweight Hedge Shears G5010

Wed, 08 Sep 2010 01:44:21 +0000

Lightweight Hedge Shears.

Blade length: 180mm/7"
Weight: 844g
Lightweight design for fatigue free use
Non-stick coated and chrome plated blades for low friction use and resistance to rust
precision ground, hardened carbon steel blades
Hardwood handles with soft, non-slip grips
Fully adjustable blade tension
Shock absorbing buffers to reduce jarring

5640 Multi Purpose Hand Shears G5640

Wed, 08 Sep 2010 01:44:21 +0000

Legend Multi Purpose Hand Shears.

Blade length: 105mm/4 1/8"
Weight: 271g
Lightweight and perfect for a number of different uses
Hollow contour, non-stick coated, self sharpening blades
Adjustable blade tension

5047 Lightweight Hedge Shears 9" G5047 9

Wed, 08 Sep 2010 01:44:21 +0000

Legend 230mm 9" Lightweight Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Barbed tangs and heavy duty, steel ferrules
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 1.2kg

5047 Lightweight Hedge Shears 8" G5047 8

Wed, 08 Sep 2010 01:44:21 +0000

Legend 200mm 8" Lightweight Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Barbed tangs and heavy duty, steel ferrules
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 800g

5047 Lightweight Hedge Shears 6" G5047 6

Wed, 08 Sep 2010 01:44:21 +0000

Legend 160mm 6" Lightweight Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Barbed tangs and heavy duty, steel ferrules
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 500g

5021 Lightweight Hedge Shears 8" G5021

Wed, 08 Sep 2010 01:44:21 +0000

Legend 200mm 8" Lightweight Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Shock absorbing buffers to prevent jarring
Barbed tangs and heavy duty, steel ferrules
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 1.3kg

5022 Silver Ceka Hedge Shears 9" G5022 9

Wed, 08 Sep 2010 01:44:21 +0000

Legend 230mm 9" Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 1.2kg

5022 Silver Ceka Hedge Shears 8" G5022 8

Wed, 08 Sep 2010 01:44:21 +0000

Legend 200mm 8" Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 800g

5022 Silver Ceka Hedge Shears 6" G5022 6

Wed, 08 Sep 2010 01:44:21 +0000

Legend 160mm 6" Hedge Shears.

Hot drop forged and hard chrome armoured straight edge blades
Hollow ground, self sharpening blades
Lacquered, hardwood handles
Fully adjustable blade tension
Cutting notch
Weight: 500g

Varilight XDQ45SWS 45A Cooker Switch On A Single Plate

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ45SWS Varilight 45 Amp Cooker Switch On A Single Plate in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ45PNWS 45A Cooker Panel With Neon And 13A Switched Socket

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ45PNWS Varilight 45A Cooker Panel + Neon With A 13 Amp Switched Socket Outlet in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ45NWS 45A Cooker Switch With Neon On A Twin Verticle Plate

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ45NWS Varilight 45A Cooker Switch + Neon On A Twin Vertical Plate in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQFiWS Fan Isolating Switch

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDSFiWS Varilight 1 Gang Triple Pole Fan Isolator Switch in the Premium White Screwless Flat Plate Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ20NWS 1 Gang 20A Double Pole Rocker Switch With Neon Indicator Light

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ20NWS Varilight 1 Gang 20 Amp Double Pole Rocker Switch With Neon in the Premium White Screwless Flat Plate Range, with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ6UFOWS 13A Unswitched Fused Spur With Flex Outlet

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ6UFOWS Varilight 13 Amp Unswitched Fused Spur With Flex Outlet in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ6UWS 13A Unswitched Fused Spur

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ6UWS Varilight 13 Amp Unswitched Fused Spur in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ6NWS 13A Switched Fused Spur With Neon

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ6NWS Varilight 13 Amp Switched Fused Spur With Neon in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ6FONWS 13A Switched Fused Spur With Neon And Flex Outlet

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ6FONWS Varilight 13 Amp Switched Fused Spur With Neon & Flex Outlet in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ6WS 13A Switched Fused Spur

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ6WS Varilight 13 Amp Switched Fused Spur in the Premium White Flat Plate Screwless Range complete with white insert. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ5WS 2 Gang 13A Switched Socket

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ5WS Varilight 2 Gang 13 Amp Switched Socket in the Premium White Screwless Flat Plate Range complete with white socket insert and polished chrome (mirror chrome) rocker switch. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These sockets have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ4WS 1 Gang 13A Switched Socket

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ4WS Varilight 1 Gang 13 Amp Switched Socket in the Premium White Screwless Flat Plate Range complete with white socket insert and polished chrome (mirror chrome) rocker switch. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These sockets have been fully designed to meet the latest European Safety Legislation.

Varilight XDQT2S 2 Gang 10A 1 Or 2 Way Toggle Switch

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQT2S Varilight 2 Gang 10 Amp 1 Or 2 Way Toggle Switch in the Premium White Screwless Flat Plate Range complete with polished chrome (mirror chrome) toggle. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation. Our standard toggle switches have been designed to control both low voltage and mains lighting.

Varilight XDQT1S 1 Gang 10A 1 Or 2 Way Toggle Switch

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQT1S Varilight 1 Gang 10 Amp 1 Or 2 Way Toggle Switch in the Premium White Screwless Flat Plate Range complete with polished chrome (mirror chrome) toggle. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation. Our standard toggle switches have been designed to control both low voltage and mains lighting.

Varilight XDQ77S 2 Gang Intermediate Switch

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ77S Varilight 2 Gang Intermediate Switch in the Premium White Screwless Flat Plate Range, with polished chrome (mirror chrome) rockers. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation. Our standard rocker switches have been designed to control both low voltage and mains lighting.

Varilight XDQ20DS 1 Gang 20A Double Pole Rocker Switch

Wed, 08 Sep 2010 01:44:21 +0000

Part no: XDQ20DS Varilight 1 Gang 20 Amp Double Pole Rocker Switch in the Premium White Screwless Flat Plate Range, with polished chrome (mirror chrome) rockers. The Screwless Range has been designed with a secondary fix interior (hidden fixing screws) for a clean, flush finish. These switches have been fully designed to meet the latest European Safety Legislation.

Varilight XDQ71S 2 Gang (Intermediate Switch + 10A 1 Or 2 Way Rocker Switch)